Edelbrock E-Street Cylinder Heads

Edelbrock E-Street Cylinder Heads offer American made quality and affordable performance. E-Street cylinder heads feature as-cast ports and are designed for entry-level street performance applications operating in the idle-to-5500 rpm range. They are available for popular V8 engines.
For more info: goo.gl/0ZBCtO

[@mikeskidmore6754]

how much weight do these heads save over a smog motor cast iron head such as on my 1979 Z-28 Camaro LM-1 engine?

[@TattooedFoodReview]

Hi I am trying to install my E-Series Edelbrock heads does it matter if they go on the left or right or which one goes left or right very important thank you for your time

[@mikeskidmore6754]

Your e-mail captured my interested but I want more power and higher RPM's I suppose I need to research your other models of heads. I am really surprised they are made in the USA Commifornia no less.

[@guizelincars2815]

I can used this cylinder heads with this camshafts? Isky Racing Cams 381358 Camshafts Isky Solid Flat Tappet Camshafts ISK-381358 Mechanical flat tappet 2,500-6,500 244 244 244 int./244 exh. 278 278 278 int./278 exh. 0.512 in. 0.512 in. 0.512 int./0.512 exh. 108 1-bolt 0.018 in. 0.018 in. No FL-358 Yes High performance Use. Rough idle. Great mid-range power. 2500 Stall. 3:70-4:11 axle ratio. Up to 650 CFM Carb.

[@Harrybowles1969]

Apparently they make a nice drivable Street head

[@Babyonboardtravelingford]

I HAVE SILVERADO 5.7 TBI 1995 IN COLOMBIA CAN USE THIS HEADS ?

[@EdelbrockTV]

Unfortunately no. The bolt pattern on the manifold is different and would not bolt on to the heads.

[@TheReinoPaasonen]

Absolutely not in Columbia, but in Tennesee you can.

[@mikeskidmore6754]

1955 to 1986 first Generation small block chevy. You need heads for a second Gen small block chevy .

[@tyler3926]

what kind of power are these heads capable of?

[@ichirakuramen7582]

I could be wrong but I'm pretty sure edlebrock says that the e street series are good for 400hp

[@blackmessiah8703]

Tyler Brassard

[@asambi69]

Depends on the engine your putting it on.

[@kobuskock6688]

@@ichirakuramen7582 You will never get 400hp on these heads, if you are lucky with the right cam and fuel combination you might see 310 / 320hp max.

[@kobuskock6688]

Do not let people fool you! You will never get 400hp on these heads if you are lucky with the right cam and fuel combination you might see 310 / 320hp max.

[@Schlipperschlopper]

Sadly from 2030 on all combustion cars including classics will be banned from public streets in entire EU and Scandinavia :-( In Germany the Green Peoples Party gave order to shorten fuel supply from 2025 on by reducing all conventional fuel stations to only one state operated central gas station per city or county. Now they even want to slow down all the gas pumps from 20 litre per minute to 2 litre per minute...From 2027 on in the EU certain car spare parts will be banned too....as exhaust systems, turbo chargers and even some engine and gearbox oils...California and New York will do the same from 2027 on.... So no investments should be done in oil burning cars any longer....They even created a new kind of crime here, called emissions and smoke crime. "Bundesabgasbespaßungsverbot" in German....((((

[@some_guy.]

Fuck....