Another very informative video! I loved the graphics done offline, so Edgar can focus on his explanation.
@scottlife16979 ай бұрын
Love these videos! I'm learning cello and these help me get in touch with how my instrument is doing what it is doing so much! I may never build a violin or even try to re set a fallen sound post. But I can better understand why I am paying an expert to fix it.
@disqusrubbish54679 ай бұрын
Excellent graphics to show the position.
@ghlscitel67149 ай бұрын
Exciting! Got your point. Took notes. Thank you, Maestro!
@marskat1313 ай бұрын
So much interesting character in presentation and useful information. ♥
@Mrcustomwerkz8 ай бұрын
thankyou for your sharing. i work mostly on guitars and bass. have always been interested to work on violins for years. this helps alot! thankz!
@zhaloskyАй бұрын
Finally Edgar made a positioning video i can finally have less excuses for my bad violin playing.
@pianodesu9 ай бұрын
My A and E strings are less responsive than G and D. Plus A string has a wolf tone in first position on C# sound. 1. In what direction should I move the soundpost in order to make A and E string more responsive. 2. Or maybe longer soundpost would help? 3. Is it ok to mark with pencil on bottom plate where previously soundpost was placed for references, how to mark it effectively?
@nickiemcnichols53979 ай бұрын
Well, this sounds dumb, but what are wolf tones? Let alone that, what does the bass bar do? What does the sound post do?
@davearonow658 ай бұрын
A wolf tone is a tone that goes "Waaaa-ooooooow".
@richardsoldan55357 ай бұрын
I amnot a violin maker, but as far as my experience goes, you need more tension if the wolftones are out of control. You could try to pull it more outside. If you have to pull it outside the right food of the bridge, it is definitely too short. Edgar says in a different video, that you should move forward to make the e string stronger. You can also try to do that. But don't try to completely eliminate the wolf tones. It will eliminate your sound quality as well.
@lanegralorenza2 ай бұрын
Which would be the "magical number" for cellos to place the bridge in the perfect position?
@Melody-69 ай бұрын
Thank you, engineer, for these educational videos. I only have a question. How do I know the distance of the 3mm sound column behind the bridge? Is there a tool to measure this?
@fiddleboy13689 ай бұрын
I always notice after a luthier sets up my soundpost and bridge per only measurements i always end up moving the bridge slightly forward and the violin opens up more. Why is this? And i find if its a good instrument to begin with the soundpost location is more forgiving. Just make sure it isnt too tight or too loose.
@msplateaugal9 ай бұрын
I am in need of the ideal position of the bridge for my cello which was made before small V marks were cut in the F holes.
@kenkim58 ай бұрын
Is this the same for brecsian models?
@Fireman91439 ай бұрын
What happens if the violin sound post is not 6mm diameter? Does it change the position? How does the diameter effect sound?
@huangdabao9 ай бұрын
Some said, at a certain range, the smaller diameter of the sound post lets the board to be vibrating more freely
@TheJmills39Ай бұрын
Why does the soundpost go 3mm behind the bridge? What happens if it's closer to or further from the bridge? Yes, I'm already subscribed.
@johnnywhyayou9 ай бұрын
hi Edgar, thank you for sharing this wonderful information, may I ask if bigger instruments, such as cello and upright bass have same positioning methods? I play the upright bass and feels like there's not enough bass, however, I feel like I am moving the soundest really far from the bridge already (about 2-3 cm)
@peterstephen15623 ай бұрын
20 to 30mm is too far behind the bridge. The outcome from that position will be lack of attack and focus on the notes. A normal position would be 8 to19mm behind the foot edge. The soundboard may also distort or crack at the soundpost position. Bridge force has too much leverage. To get more bass one can shift the post out away from the bass bar. Not too much outside the bridge foot pattern though and as the post moves out it may have to be shorter.
@richardsoldan55358 ай бұрын
What happens if the soundpost is too long?
@einsam_aber_frei6 ай бұрын
Shorten it slightly by sand paper.
@richardsoldan55356 ай бұрын
@@einsam_aber_frei What happens with the Sound if the soundpost is too long. Does it damage the instrument?
@nicklapietra38903 ай бұрын
Yes, it could damage the instrument. I believe it could split the top.
@guny84622 ай бұрын
아니지 더 가운데 끼는거지
@seanleechild8 ай бұрын
If my violin is sounding fine, is it necessary for a luthier to check and adjust the sound post once a year?
@purnachandrapanigrahi93555 ай бұрын
readjustment of sound post position is not needed if the sound is good. the sound post once positioned does not deviate from its position itself unless u disturb it. When all the strings are removed/ loosened, it may fall down, if the length of the sound post is less.
@philipgregorysougles17449 ай бұрын
Explained like never before!!! Edgar is great!! I hope one day my six year old daughter who has a real talent on violin gets an Edgar Russ Violin!
@mosaiques239 ай бұрын
Nice explanation for the basics, but there are millions of variations and each instrument is different. You can rotate the soundpost, change the angle, change the place... Every small variation will change the sound of the instrument, it will make it harder, softer, it will benefit the bass, the treble, etc, etc... It is extremely complicated.
@antonvf96199 ай бұрын
PLEASE USE ANOTHER BACKGROUNG MUSIC LOOOOP! when watching several of your videos in a go it's maddening!!!
@fancypants_magoo4 ай бұрын
What you should do is contact Wayne Szalinski. He built a shrink ray in his basement. A movie was made about it called "Honey I Shrunk the Kids." Maybe he can shrink you down to fulfill your dream.
@gasparocelloman98522 ай бұрын
€60 shipping for a €35 set of two cello gauges 😵
@michaelbecker378Ай бұрын
Very pedantic analysis of the sound post position. One size does notfit all. The correct position of the bridge is determined by the position of the "F" holes. (north-south as well as east-west) The 195mm mensur is wrong more offten than not and does not apply in most cases. The "f" holes, placement and position, determine how the top vibrates, therefore they determine where the bridge and eventually where the soundpost should be placed.
@bubbychamp8 ай бұрын
i hope you mean 3cm and NOT 3mm
@peterstephen15623 ай бұрын
Yes definitely 3mm behind the bridge. 30mm would be very dull sounding and likely cause the belly to distort. It is better to avoid the use of centimetres and stay with metres and millimetres. Less possibility of confusion and the math is easier.
@silvag.r.49559 ай бұрын
Hello Edgar,,, if I subscribed and like your video ,and commented ...would you make a gift to me ? a violin ??😀🤩😍🥰😇😄😃🤔🤭🤗😘
@thehappybanjoteacher29 күн бұрын
Please…it is very offensive to listen to you using fowl language. Thank you