Ediag Automotive Diagnostic Device by KINGBOLEN Review and Test

👍
In this video I show you the EDIAG Automotive Diagnostic Device tool on a Skoda Fabia MK1 (99-07) and Skoda Superb Mk2 2012 which are similar to other VW/Audi/Seat/Skoda models
Ediag: amzn.to/3SUDZ7q
Buy Harvey a Coffee: ko-fi.com/hatb...
Please Like this video:👍 • Ediag Automotive Diagn...
Please subscribe to this channel:👍 goo.gl/eubNMd
Please share this video:👍 • Ediag Automotive Diagn...
I thank all you guys for watching 😎. Please let me know if this video helped you and what you think in the comments below and don't forget to like, share and subscribe for more escapades of HatBoyHarvey in the next video release,
(Oh and he’s the rabbit in the video if you’re wondering)
The content of this video is for information and entertainment value only and it's creator makes no claims, promise or guarantees of it's accuracy, coverage, instruction or adequacy of the procedures contained therein.
HatBoyHarvey assumes no liability for property damage or injury incurred as a result of any of the information contained in this video.
HatBoyHarvey recommends correct safety practices when working on motor vehicles, vehicle lifting tools, axle stands, hand tools, electrical equipment, chemical, products and consumable parts, lubricants or any other tools, equipment, chemical product and consumable parts, lubricants seen or implied in this video.
No information contained in this video shall create any expressed or implied warranty or guarantee of any kind of expected result including any injury, damage or loss that may result from improper use of the information contained in this video and the use of any tools, equipment, seen or described in this video and is the sole responsibility of the viewer and user and not the creator of this video and HatBoyHarvey.
Music: / The Queen Will See You - The Mini Vandals.
youtube_audiolibrary /Race_car /Tonto - Silent Partner /
also music by Audionautix.com is licensed under a Creative Commons Attribution license (httpscreativecommons.orglicensesby4.0)Images licenced under creative commons attribution license by 2.0. To view a copy of this license, visit creativecommon...

[@wa.felix.d1strict]

Hello, yes, reading out the OBD data is relatively slow on the Škoda Fabia Mk. 1. However, this is obviously really a problem with the vehicle. Competitor products also need approx. 4-5 minutes. Perhaps it might be quicker with the equipment available in garages. But these devices can cost upwards of €200. So it's a bit too expensive for a private user. Thank you for the video, Harvey!

[@HatBoyHarvey]

I was really impressed with this product for the money, it's great value, and I'm looking forward to putting the device through tougher jobs :-)

[@EvzenEmanuel]

That airbag igniter resistance too high is 99% bad clockspring. Had to replace it twice already. Pretty common fault I would say. But it's pretty quick and easy fix.

[@HatBoyHarvey]

I agree, thanks for sharing that as it is the first port of control to look at :-)

[@ruimvp]

Thank you Harvey. Great video again. It was something that i was looking for, some way of not waste much money, but be able to acees airbag and brake codes not using chinese cheap devices. does this device or app has anual payments to unblock features or it is pay once type?

[@HatBoyHarvey]

The device gives one years subscription, but not sure what the cost is to renew, I'll ask them and get back :-)

[@TXPer]

I use VAGCOM cable, i tried to use BT adapter on skoda and that doesn't want to work. Skoda has VW KKL protocol, not OBD-2

[@_Bra3ers_]

Cars before 2006 or 2007 (I don’t remember exactly) have a slow data bus, so standard OBD2 adapters are simply not detected by the on-board system. The KKL-cable is cheap and solves most problems, but you need paid or cracked software and certain skills to work with it. It's like the Prompt and GUI on Windows =)

[@Tim89-l1e]

Hi harvey can you please make a video how to remove the tandem pump

[@HatBoyHarvey]

Thanks, noted on my list :-)

[@_Bra3ers_]

Some Skoda's not working with obd2-adapters. Need VAG-COM cable and PC in this situation.

[@HatBoyHarvey]

I agree, Vagcom is a great, if not the definitive tool for VAG cars :-)

[@EvzenEmanuel]

I believe VAG-COM offers more features than OBD II. Especially on older VAG cars.

[@imadhd3507]

Hello! I have skoda fbia 2000 I have felcod 01222 airbag crashsensor passenger sid can you tell me where it,s location in the car?

[@HatBoyHarvey]

Pull back the carpet under the seat on the B crossmember.

[@anonnymou]

Will you make a video on how to code the key so that the central unit works?

[@HatBoyHarvey]

Never done that, so you would be better asking someone that has, sorry, but if I ever need it doing I will video it, thanks for asking :-)

[@anonnymou]

Ok 😊

[@TheTank1963]

Where is the link to buy this please?

[@HatBoyHarvey]

Thanks, it's in the description :-)

[@nazuddin6346]

Thanks

[@HatBoyHarvey]

Welcome ;-)

[@t5jerry]

love your vids hatboy, just wondering if you can help with my skoda superb electric seat positions, please don`t tell me to look in the manual, as i already have and it`s no help....i have the same superb as you, with electric memory drivers seat, before i changed the car`s 12 volt battery (engine bay main battery) i could alter the seat so it was in any position , get out of the car, and when RETURNING to the car, plip the remote fob to unlock the car and the seat would return to it`s set position , now since changing the 12v battery it no longer does that, when i remove the key from ignition, the seat moves back a few inches to allow easier egress and when i get back in the car, the seat automatically moves forwards a few inches, again to the set memory position, but if i lay the seat flat, as i often have a kip in my lunch break at work, get out of car, lock it, return to the car, unlock car, the seat still lays flat ! any ideas please ???

[@HatBoyHarvey]

Have you tried pairing the seat positions with the keys?

[@t5jerry]

@@HatBoyHarvey sorry harvey, don`t know how to ?

[@hamadaalkhafaji88]

please i need help i have bro with dashpord the watch disapper and the malige changing from km to mil how can i back it

[@HatBoyHarvey]

It's likely to be a bad connection. Check that first then inspect the PCB for faults, dry solder joints, burnt out or damaged parts and fix if you know how

[@hamadaalkhafaji88]

What is the sound in the min 8:51

[@HatBoyHarvey]

A number of functions one being Gong is lights left on and buzzer is low coolant :-)

[@hamadaalkhafaji88]

Ok right its for the cooling sensor but why its work when i switch ignition on and the door open when i closed the door its gon​@@HatBoyHarvey