where do i get a set of those putty knives you use and what's the name of the body filler you use it lays amazingly smooth.
@Gaviria8575 жыл бұрын
What was that substance in the spray bottle you used after finishing up the filler, what did you spray on it just before priming ?
@TruthHurtLiars5 жыл бұрын
Wax and grease remover or also called prepsol.
@chanchung3375 жыл бұрын
How are you feeling the body work with rubber gloves? I bet that body work is not straight especially the body line!
@gigimo53415 жыл бұрын
For me when im feeling its easier with some tight gloves
@МуратИванов-в9х5 жыл бұрын
Evercoat?
@rahmatullahhaidari26325 жыл бұрын
بسیار زیبا مقبول 🇦🇫🇦🇫🇦🇫🇦🇫🚘🚘🚘🚘
@عراقاسمكهيبه-ب6ت5 жыл бұрын
Rahmatullah Haidari لا مش مقبول
@garyscholvin97925 жыл бұрын
what is the first thin coat you spray on first before priming?
@DutchCarPainter5 жыл бұрын
A washprimer,
@magnusstenhaug58175 жыл бұрын
No rust protection on the bare metal?
@markobiko56465 жыл бұрын
it looked pitted with rust to me too.
@magnusstenhaug58175 жыл бұрын
@Aaron Anderson i thought u had to spay some anti corrison on the metal before filler so the it's not gonna start to rust from underneath the paint. But im no expert thats why i asked
@gigimo53415 жыл бұрын
Usually after a repair if u have used a dent puller or welded, u have to spray some rust protection on the back of the panel you have fixed
@Dennisvmierlo5 жыл бұрын
Super. Mooi om te zien vakman aan het werk. Vroeg me af welk plamuur is de gele plamuur iets van 3m of van welk materiaal. Dennis.
@barrym31095 жыл бұрын
Lijkt mij Ferro multi.
@DutchCarPainter5 жыл бұрын
Klopt
@raminnajibi83433 жыл бұрын
🏎 👍
@nord4474 жыл бұрын
👍
@Irfan-or9sd5 жыл бұрын
Which body filler do you use?
@ashramdhan15822 жыл бұрын
Multi ferro is from Holland basically is just a glazing putty they don’t use filler.
@Irfan-or9sd2 жыл бұрын
@@ashramdhan1582 thanks for replying.
@ashramdhan15822 жыл бұрын
@@Irfan-or9sd no problems brother anytime.
@ddcarshinedeepakdubey58792 жыл бұрын
After putty what is that... Spot putty
@freebelarus6105 жыл бұрын
Ребята, что за шпатлевка оливкового цвета??
@chanchung3375 жыл бұрын
No flashing in between primer coats
@Mankelipoika4 жыл бұрын
Why no?
@chanchung3375 жыл бұрын
What about the pin holes
@ashramdhan15822 жыл бұрын
He doesn't get pinholes he uses glazing putty instead of filler we use in the states.... glazing putty is ridiculously overpriced here in the USA .
@Kevin-q4q1y5 жыл бұрын
In Germany its not allowed to putty in color. All have to be removed
@DutchCarPainter5 жыл бұрын
Here the same, but was a very big old repair underneath