Right? I watched the the whole thing so that I could see the blending of the spot into the rest of the doors
@bill45834 жыл бұрын
exceptional skills, this so call quick job is better than many other regular jobs.
@linus4523453 жыл бұрын
Just a tip from one to another, try to keep the Repair area as small as possible. When you sand down such a big area around the damage it gives a much longer, material consuming and also bigger area where you have a risk of geting something un-even. ”Better”.. or maybe at least more efficient, is to try and keep it as small as you are able to 😇 i work with only very small damages that can be ”spot repaired” so i basically never put clearcoat on an entire panel, only usualy the damaged area + 5-7 inches or 10-20cm around. Im not saying you need to repair like that since its hard and requires some experience with the clear. But the Repair up until clearcoat should be as small as possible, and then go ahead and just o it as normal and put clear over the whole panels if you dont know how to blend! 👍🏼 great video! Thx man
@adriancarter8252 жыл бұрын
Can you go through the process please of filling a small penny size dent , that’s what I’m concerned about extending the situation beyond the dent to much and will the clear coat mask any transition from original paint to new paint and should I sand the new coat to flat prior to clear coat , your help would be appreciated, I’ve worked on large areas before but like in numbers where you can go to the joints and mask off , the dent I have to do is on wheel arch it’s rite on a body line line crease can’t use pdr no way in double skin , I have thought of drilling hole in rear skin to gain access to work it out but not so sure .
@eternalrage1085 Жыл бұрын
so true. its a such a small spot to be repainting that much panels. first off i wouldn't use those pneumatic sanders for that job. he damaged more clear coats in the surrounding area than he should have. when what he should have done its just base and top coat the spot only polish the surrounding area then use a blending reducer to blend the new clear coat to the old one. polish the whole panels when done.
@cmerighe2 Жыл бұрын
I need instructions on how to repair a very small dent, and I am willing to pay
@patstar676 ай бұрын
Some colours are hard though, some blends are terrible if not off a body line
@aceinyourfacebcm2592 ай бұрын
He did know what the fuck he was doing. Hay dummy open the front door before you start!!!! TO LATE ALREADY DOWN TO BARE METAL. 😂😂😂😂” I SAID KEEP IT SMALL”!!!!! .
@HotrodHR573 ай бұрын
I like your technique for mixing small amounts of body filler!
@OakleyJRVinkle4 жыл бұрын
Ha Ha love this Vid ! no crappy yappy ! just snap zap DONE ! thumbs up !
@Mrsark5919Ай бұрын
Good video, would be great to explain the steps your doing and process for us novice hobbyists, keep up the good work
@DutchCarPainterАй бұрын
Thanks,i will do that in the future.
@jzak6134 жыл бұрын
Proper job. Very nice. Wish you would have shown the paint work at the end though.
@immy199915 жыл бұрын
So annoying watching somebody you scrapers as a spreaders find it so difficult to watch . But he is good at he’s job .
@zachtoburen5 жыл бұрын
Immy Zaman fr
@-ct-celcomtechniques25662 жыл бұрын
The most expected and satisfying part has not been recorded ! But ok, as you shown, both doors had to be painted totally. I was assuming that only the part you made the repair on would be painted.
@itzCRIMS0NАй бұрын
Wow, really love the part where you show how you painted the car....
@DutchCarPainterАй бұрын
I understand 😉 have lots of vids painting cars
@ledenboy0074 жыл бұрын
Quite hard and tough big job. For me it would be easier to get someone to do it and just pay the bill. Because it would cost me more to buy tools, equipment, time and space. Good jod👍
@snelluhmans6 жыл бұрын
Ik vind het altijd maar weer knap, dat dit er weer strak uitziet!👍
@DutchCarPainter6 жыл бұрын
Thanks man👍
@glytch53 жыл бұрын
Ah... skipped over the part I wanted to see. What was the clear stuff you spayed on? Are you using clear coat as a sealer? I am confused on how you get the new primer and paint to blend in with the pre existing stuff.. it seems like that would cause a problem.
@jerryp24332 жыл бұрын
I wish you would have showed how you blend the paint
@deboeier7283 Жыл бұрын
Fantastisch vakwerk zeer interessant om te zien.
@jimfeaster48372 жыл бұрын
Nice job !
@srofficial5251 Жыл бұрын
In my workshop, 2 of us used to work on 10 vehicles daily
@rigoio5 ай бұрын
Awesome job man! What’s the liquid you’re using at 23:34 ? Is it IPA or just DI water to check for any highs/lows points?
@stevejanka3616 жыл бұрын
Good afternoon Edwin. That is just beautiful results. That primer you use really does a good job for you. Your use of different and various sand papers really makes a difference too. That shine is just perfect. Thanks for another great video have a good week and you take care.
@DutchCarPainter6 жыл бұрын
Hi Steve!! Good afternoon, job came out very nice,that filler the uv filler is awsome,and can be used in very different situations. Have a great week my friend👍👍Thanks.
@DOMINITYful6 жыл бұрын
? What kind of primer r u using
@stevejanka3616 жыл бұрын
DOMINITYful , We use U-pol primers and fillers and sometimes Southern urethane primers and fillers. Thank you
@امیدشافعی-ر4ع Жыл бұрын
بلکه واش پرایمر کار درست است
@redscarecomixx84885 жыл бұрын
but how did he paint it?? thats why im here...
@panedole4 жыл бұрын
Cheers for this, I have been researching "osteoarthritis age 30" for a while now, and I think this has helped. Have you heard people talk about - Hanadelyn Banadison System - (search on google )? It is a great one of a kind guide for discovering how to get rid of arthritis without the hard work. Ive heard some unbelievable things about it and my co-worker got cool results with it.
@Vv_Twisted_vV4 жыл бұрын
Was a basic paint job on two doors. The rest was masked off. So, no he did not blend the paint.
@channelfargone3 жыл бұрын
So both doors got painted i see that but do the doors have to get sanded and primed or do you just color coat over the original clear coat? What kind of preparation needs to happen to the panels that weren't sanded and primed?
@albertokayvon57193 жыл бұрын
@@Vv_Twisted_vV Black doesn't need to blend as long as you have a black that matches. On the other hand, you'll see the different colors if you don't blend on sliver, white, yellow, etc With that being said, he did blend the paint, can you see the tape of the middle has black paint but left&right side don't?
@jimfeaster48372 жыл бұрын
Very clean detail...
@mrshawterry6 Жыл бұрын
Good comment @linus452345, i'm nowhere on you guys level doing that, but i was going to ask, why did he make a small area, that large, i thought you were to try to keep the area small, that gentle just made more work.
@broadside83263 жыл бұрын
hi there, i drive a honda accord cu2 in blackmetallic an have a similar damage size on my door in the lower part. what would be the cost for fixing that kind of damage if i give it away? thank you for replying sir🤝🏾
@melanieomer9186 Жыл бұрын
How about a list of what tools you used?
@crookassassin2 жыл бұрын
Damn... Wished you'd included the painting... Oh well, maybe next time! :-)
@shadows47754 жыл бұрын
Hi,what is the name of the filler putty you are using please. Great videos.
@muhammadramzanj Жыл бұрын
Nice job
@Imwright7204 жыл бұрын
I get that you want to cut fast with the 80 but don’t want 80 grit on the paint. Would it be that much slower to just use the 220. Thanks for showing the grits most of the times.
@NikosDIY4 жыл бұрын
I think body filler won't bond to sanding scratches higher than 80.
@easilyoffended77724 жыл бұрын
Guy is fuckin sanding areas that are still good...lol
@johnlaxodsfinter61513 жыл бұрын
Good work man.
@JJMvlogers2 жыл бұрын
Hallo apa masi ada lowongan pekerjaan sebagai mecanic dempul dan cat.??? Saya butuh pekerjaan sekarang Saya sudah berpengalaman Mohon infokan kalau masi ada ya Terimakasih Thank you so much
@MrHotguy0344 жыл бұрын
the UV primer is good doesnt shrink
@razzraziel Жыл бұрын
-Quick Job! **paints entire two doors**
@markotodorovic6586 Жыл бұрын
Vrhunski,prefectee
@christianestrada64184 жыл бұрын
Great job!!... "California"
@splash59744 жыл бұрын
Do you have a link to that dual action sander? Beautiful work!
@TU154B14 жыл бұрын
thats a Mirka Deros
@splash59744 жыл бұрын
@@TU154B1 Thank you
@j.lozano16674 жыл бұрын
Just a waste of time !!!! Did not show how did he paint it. Thats why you dont have many viewers. Your video is juat a waste of dat load
@domechimenti55246 жыл бұрын
Sei un grande bel lavoro
@dongil1236 жыл бұрын
Excellent work man!
@DutchCarPainter6 жыл бұрын
Thanks
@BipolarSteve834 жыл бұрын
When you forget to put the sandpaper back on the DA
@johnp824 жыл бұрын
Did you put color on the whole panel or just the repair area and then cleared the whole panel
@Oenomaus456 ай бұрын
He sprayed the whole door with base then clearcoat.
@coco-te1op3 жыл бұрын
Does the whole panel then have to be sprayed or blended?
@wakko0hakko2 жыл бұрын
My understanding is the base coat is blended to rest of panel but the entire panel gets clearcoat.. I believe.
@syedraza76445 жыл бұрын
please post what items u r using
@Thatguy-dk8zm4 жыл бұрын
Nice job how do you clean your scrapers they look spotless
@ddcarshinedeepakdubey5879 Жыл бұрын
Is it 2k primer
@tylergarber33343 жыл бұрын
Your good but it doesn’t help anyone when you don’t tell them what your doing exactly
@MitinasDeividas5 жыл бұрын
Why not just use pdr? Why all this mess?
@superXloko2 жыл бұрын
car is like ahhh been trying to get that itch for years 😩
@ivanstanchev814 жыл бұрын
Can you tell me more about the 3m dust remover you are using? If it is dust remover ,i can't se the sine on it in the video . Thanks in advance:)
@ouertaniabdelmonem16652 жыл бұрын
N 1 👍👍👍🌹🌹🌹👍👍👍
@janinsweden8559 Жыл бұрын
Missing the last part where you paint the area
@vineethvineeth14113 жыл бұрын
Which primer using
@Sarathmon24 Жыл бұрын
Perfection
@srofficial5251 Жыл бұрын
If you don't use body filler, tell us about it too
@leeava53844 жыл бұрын
it would be lots better if the guy said what grade of paper hes using here instead? of trying to hold up to the cam,,, as cannot always see it,,,,,,
@eugeniabradley88792 жыл бұрын
What type of rubber body filler spreader is that? I can't seem to find one anywhere.
@jordanchristie75795 жыл бұрын
Hey! I’m currently doing a repair like this but when I apply my primer I can still see the patch of the bondo, after watching this I know I need to go to finer sand paper gradually but just wondering if you sprayed anything over the bondo or was that just primer? Please give me any advice too to help me blend the bondo better so I’m not left with a patch/stain after painting Thanks!
@preownedsales44955 жыл бұрын
Ben learning bodybwork for a year now i learned u have to feather the area around the bondo with 80 grid but before this sand bondo to a smooth finish
@darrindossett24915 жыл бұрын
@@preownedsales4495 it side not have to be feather edged with 80. You can do it with finer grit. You are right tho, has to be feather edged or it will show thru.
@hubertmadova6018 Жыл бұрын
Fine
@Esho_7772 жыл бұрын
Whats that he used at 8:20? Also which grit right after that treatment?
@bajicxdejan5 жыл бұрын
whether it is UV lama for drying all primers and colors or only for UV primer and color? Nice work
@DutchCarPainter5 жыл бұрын
Uv lamp is only for drying the uv filler.there is no uv drying color by my knows
@tatygraphy4 жыл бұрын
Hi, mess sometihing from the vid, what happend with the doors? i see you was painted 2 door but i cant saw it when you prepered the doors, or you painted on the lack?
@izyfication4 жыл бұрын
How did he paint it ?
@vineethvineeth14113 жыл бұрын
Good job
@moss7454 жыл бұрын
Excellent grade 👍👌
@mariomocofan99476 жыл бұрын
Have a nice week,thanks for the vids!
@pedroluiz62666 жыл бұрын
O remendo Ere uma coisinha de nada e VC o estendeu e passou muinta .massa não precisava tanto assim
@yanyansukmayana53692 жыл бұрын
Awesome
@amhcanadaltd40264 жыл бұрын
check out our hand held UV LED Lamp ! Best one on the world market bro!
@georgizlatinov50396 жыл бұрын
Great job 👌👌👌
@tariq_al-king6 жыл бұрын
that panel re-sprayed before ? because that orange peel is so bad
@aliboumaaraf31913 жыл бұрын
What is the substance you used in the 8:17 minute
@muhammedkhatieb41096 жыл бұрын
Nice job my friend 😁👍👍👍 👍👍👍✌
@DutchCarPainter6 жыл бұрын
Muhammed My friend!!!!! Thanks bro👍👍👍
@bigworm66355 жыл бұрын
lol, mix your putty on a piece of cardboard or the onion paper books they make for that. He was wasting material dropping it on the floor. Throwing money away....
@davidk63106 жыл бұрын
Nice job, what primer did you use?
@DutchCarPainter6 жыл бұрын
Thanks, i use a uv filler
@davidevans88266 жыл бұрын
U r goooooood sir wow!!
@DutchCarPainter6 жыл бұрын
Thanks!!!
@srofficial5251 Жыл бұрын
They spoil things a lot ... masking rolls
@FIGHT101TV2 жыл бұрын
Did you spray eproxy primer? is that what that was
@DutchCarPainter2 жыл бұрын
Uv-filler
@AaronUnknownPerformance6 жыл бұрын
Could you tell me what electric Da sander you are using.
Can anyone tell me where I can get does two big spreader? And are they made from aluminium ? Highly appreciated!
@wakko0hakko2 жыл бұрын
They just regular home decorating scrapers by the looks of it.
@hosmisli3826 Жыл бұрын
واقعا کارت عالیه خیلی الگو برداری میکنیم
@kl-qy2ev2 жыл бұрын
👌
@danielmackenzie57703 жыл бұрын
No dust extraction..
@heshim72 жыл бұрын
“Few word do trick”
@Z-Ack2 жыл бұрын
Why use a block then go right back to your da?
@redeye247hotwheels5 жыл бұрын
When you try to be smooth but keep dropping the product, lol
@DutchCarPainter5 жыл бұрын
Sorry but the green putty is very thin and runs of the knife very quick. I do my best😉
@kl-qy2ev4 жыл бұрын
Good job 💯👍👏🥰😍
@DutchCarPainter4 жыл бұрын
Thanks👍🏻👍🏻😁😁
@qhpainters Жыл бұрын
Didn’t even show the painting process
@mp56034 жыл бұрын
What liquid do you have in the botle and at the end of the video clean all surface?
@paulmanriquez40732 жыл бұрын
Alcohol, buddy..!
@julioclementejunior54384 жыл бұрын
Joia!!!
@ΠΑΡΗΣ-ζ4ι6 жыл бұрын
Amazing result!
@mr.wizeguy89956 жыл бұрын
24:17 Is there foam soft tape between doors?
@PAINTREPAIRCAR6 жыл бұрын
very good work and nice result..!!!!!
@DutchCarPainter6 жыл бұрын
Thanks friend!!!
@anzejurkovsek4 жыл бұрын
I should have missed the quick part
@Luminan7774 жыл бұрын
That mask does nothing with that Huge Beard you have lmao. Osha would tell you to shave it all off
@foxybrown26 жыл бұрын
That car looks like it has been painted before. It look like it has a whole lot of orange peel . Or bad body work. not on your part but to the right on the video.
@zochpeter6 жыл бұрын
do a post edit narration like Gunny is doing and your videos will be 1 grade better!
@kl-qy2ev2 жыл бұрын
💥
@cokko87pace184 жыл бұрын
Man open that fuckin door!!!
@rogierkok47865 жыл бұрын
16:16 wat voor potje is dat en wat doet het?
@Steel_the_Free3 жыл бұрын
10:42 - video freezes, clock runs; 11:55 - camera rolls, subject springs into action. Not bad for a silent movie.
@jenniesmythe81885 жыл бұрын
I would’ve kept the little dent for so much work. Wow
@DutchCarPainter5 жыл бұрын
I know,but for me its nothing special or alot of work. The end result makes all the work worth. Thanks.
@Mysterymeeet5 жыл бұрын
That's why he gets paid much more than you do..
@ragipgashi1136 жыл бұрын
Hallo , Zo te zien is dit een kras met een deuk .. normaal moet je dat eerst uitdeuken voordat je alles gaat dichtplamuren.
@DutchCarPainter6 жыл бұрын
Hey,klopt helemaal wat je zegt,als je indd een flinke krasdeuk heb is het raadzaam hem eerst met de spotter ui te deuken. Deze krasdeuk daarintegen was minimaal maar wel aanwezig de diepte van de deuk was zo minimaal dat die nieteens uit te deuken zal zal.daarom was in deze situatie alleen plamuur meer als voldoende om het strak te krijgen👍
@ragipgashi1136 жыл бұрын
Dutch Car Painter Hey , dat klopt wat je zegt .. maar op de video lijkt dat er een grote deuk inzit , ik werk ook als een carrosserier al 4a 5 jaar lang in belgië 😉