Edsal Premier Shelf Assembly: Plus tips to speed up the process

[@bullishwoolley9796]

Thanks for the very clear instructional video easy to understand and straight to the point!

[@detgypsygirl]

You gave the best directions. Thank you

[@chrisharper8891]

No instructions came with mine.Thank you for the instructions.

[@jaywalkericeify]

I was going to return the shelving because it was extremely rickety. Thankfully your video showed a tip of using a mallet or hammer. Much appreciated.

[@shopwarrior1835]

Glad I could help!

[@teresacoffman5529]

I found that if I used a piece of wood (such as a 1x2) to straddle both braces in the corner, I was able to hammer on the wood and pound both braces into the pole at the same time.

[@georgeeliot1256]

Super helpful into stacking the shelves effectively-esp alternating between tightening, loosening, and tightening again. My directions required post couplers, but there were none to be found in the set and this alternative worked well.

[@shopwarrior1835]

Glad it helped George!

[@wcloister]

Thanks for this video! Any suggestions for: 1) rubber/plastic covers for the legs to avoid damaging the floor 2) raiser for the legs, to be able to place it in a slanted floor? Thanks in advance!

[@MegaSandyvagina]

The wire shelves were bent, loose, and floppy. I used six 12 inch zip ties to secure the wire shelving to the beams which did the trick.

[@MegaSandyvagina]

Six zip ties per shelf. 30 total.

[@louisestaats234]

Thanks. I'm getting ready to put them back together after a move. I had trouble with them staying up. This should work.

[@timronchetti4719]

Your missing the Edsal Steel Post Couplings For the posts that come with it, for the 2 posts to connect to each other.. Most come with them...

[@Mzpixz]

Omg mine didn’t even come with the instructions

[@Josh102697315]

Are the shelves actually to spec? I bought a different model with plastic shelves and they were actually 47x23 instead of 48x24

[@catress1574]

You forgot to mention the wire hook hangers

[@williamhenry2290]

I can't get two the vertical beams to align. If I try to tap out to realign the opposite side also taps out. Even with 2nd set of hands ...

[@williamhenry2290]

Nevermind after putting it rest way together managed to lift up tap out and tap back down and the beams aligned cause other side couldn't fall out anymore.

[@brieashelton5300]

Where do these S hooks go??

[@jpetttube]

Thank you!! So helpful 👏👏👏

[@shopwarrior1835]

Good! Glad to hear that Judi!

[@Yololorenzo]

This system is a piece of junk. Mine did not come with instructions. Also I need to install the shelf horizontally and no one seems to have instructions on how to do it that way. So frustrating.

[@sarahdriley]

really desperately looking for directions and sat here in the middle of trying to assemble a shelf so imagine my frustration that your video shows instructions and then you cut the video and flip the bar clearly so that it’s not assembled in the way you just described. Thanks for nothing