Starters guide to editing Marlin firmware - one step at a time

  Рет қаралды 20,054

Ed's 3d Tech

Ed's 3d Tech

Күн бұрын

Пікірлер: 14
@cnaazh6942
@cnaazh6942 2 жыл бұрын
Finally i found someone expert that explains everything so good and slow that you won't need to reduce speed to understand what is happening. Love this channel ❤️
@Superimpresora3d
@Superimpresora3d 10 ай бұрын
wow! this was the most clear video I have seen so far on youtube. Everything was so clear and easy to understand. The pace of the video is just perfect. Thanks so much for such a quality video. This is an incredible contribution to the maker community. Thanks so much for making this video. You are my new hero!
@FEARLESSKRIEGER
@FEARLESSKRIEGER 2 жыл бұрын
This is the absolute most helpful video I have found yet. You actually made it so I could do the firmware update. Thank you!
@EdwardBraiman
@EdwardBraiman 2 жыл бұрын
Thanks.
@noanyobiseniss7462
@noanyobiseniss7462 2 жыл бұрын
Thanks for all these tutorials! Will pop in disord again soon.
@EdwardBraiman
@EdwardBraiman 2 жыл бұрын
You're welcome.
@Soravia
@Soravia Жыл бұрын
When I put in latest Markin 2.1.2 vanilla to work for Ender 5 Plus Silent board 2.2.1, I modified the example configuration. It prints, but after first layer, it disables Y axis motor with only X, E and Z moving. BUT it doesn't do that with OE firmware based on Marlin 1.1.9. It also doesn't do that on circle shapes and shapes starting with multiple locations and span along Y axis. It just does it on second layer of calibration cube and variations of similar shapes. I used latest Cura 5 and another slicer to same results.
@bybarbaros
@bybarbaros Жыл бұрын
Thank you for a really detailed and simple tutorial video. It is a very good resource for those who are new to this system like me and want to learn. Unfortunately, in some videos, abbreviations and excessive technical names are mentioned, which we have difficulty in understanding and applying. Thank you again for your valuable information.
@EdwardBraiman
@EdwardBraiman Жыл бұрын
You're welcome.
@samsman007
@samsman007 2 жыл бұрын
Compiled successful but it's just not working on the printer! All I changed was the Bed_MaxTemp. Have to revert to stock firmware.
@corlissmedia2.0
@corlissmedia2.0 2 жыл бұрын
Are you not using ABM (auto build Marlin)?
@EdwardBraiman
@EdwardBraiman 2 жыл бұрын
I personally don't used it. I prefer working at lower level.
@patrickbodine1300
@patrickbodine1300 2 жыл бұрын
So, can you make a video that is straight forward without going off on a tangent? I need step by step without any "extra" stuff. Like "what you can do" or "what is possible". ?
@EdwardBraiman
@EdwardBraiman 2 жыл бұрын
You understand there's about 20 playlists on my channel?
Fixing Marlin Firmware loading issues on 32-bit MCU(s)
11:12
Ed's 3d Tech
Рет қаралды 2,8 М.
BAYGUYSTAN | 1 СЕРИЯ | bayGUYS
36:55
bayGUYS
Рет қаралды 1,9 МЛН
Updated Marlin firmware setup guide - VS Code and Auto Build Marlin
14:55
Marlin configuration 2.0.9 - Basic firmware installs
23:40
Ed's 3d Tech
Рет қаралды 36 М.
MARLIN - Essential Guide To Start Editing Your Own FIRMWARE
23:07
Marlin Firmware - VScode PlatformIO Install - Build Basics
27:51
Ed's 3d Tech
Рет қаралды 21 М.
BTT TFT35 dual mode touch screen guide
15:25
Teaching Tech
Рет қаралды 305 М.
Using ChatGPT to Program Pico Pi
2:57
Exploring Stuff
Рет қаралды 215
BTT - Manta E3EZ - CB2 Building (Make) Klipper Firmware
15:52
Ed's 3d Tech
Рет қаралды 2 М.