EEMANN TECH ULTIMATE TRIGGER FOR CZ (44-130084). New tools by Eemann Tech.

[@davidmacnab5213]

FYI - it was not that easy for me to remove the trigger bar pin; the holes did not line up as neatly as in your video. I ended up having to remove the sear cage to get enough movement in the trigger bar. After that all went well. As you say, tolerances differ. I also did not have to use the pre-travel screw; the trigger is at the end of its travel for double-action. Terrific trigger for my hand. Very comfortable and well worth fitting. Thanks.

[@emilemoawad8523]

Exactly, same for me, but this got me worried, because in another video they state that it has to have some space in case there is some weather change or dirt and dust. Mine is totally at the end and i even had to take off the pre travel screw

[@CZFanGrrl]

I bought two flat triggers and I loved them, then I bought the Ultimate and out came the flat triggers. The Ultimate is amazing and everyone that shoots my Shadow with the Ultimate is getting one for their gun.

[@mps9649]

@CZ FanGrrl..Is the difference between the flat and ultimate significant in DA? I don't have any reach issues with the stock trigger in DA and was interested in the flat for the crisp SA....but now came across the Ultimate.

[@Steel_shooter]

Got and installed mine in the S2 today, love the feeling.

[@crookedikon]

I see my next upgrade in the making. Plus I need the trigger to match the grips anyway.

[@Speed-shooter]

I’m a firm supporter of the Eemann stuff. Springs to triggers for my shadow 1 and 2. I’ve now made the leap to the cz czechmate. My question is please tell me your springs and floating pin and other eemann accessories work on the czeckmate. Thank you for all the videos as they are extremely helpful Sir.

[@paulhagiantoniou530]

Hello Bernard Firstly Thank you for your support of the Eemann Tech Brand. We have a range of products suitable for the Czechmate, the main springs and recoil springs are the same, the trigger return spring is different and we have a competition version available. Triggers are available too in a variety of models, be sure to choose the ones for single action only. Glad you’re enjoying the videos 😊

[@paulhagiantoniou530]

Yes the competition trigger pin works in the TS model

[@Speed-shooter]

@@paulhagiantoniou530 thank you very much and keep up the great work.🏆🏆🏆

[@paulhagiantoniou530]

@@Speed-shooter Cheers Bro 👍

[@jesenikm]

I have ordered the ultimate trigger today. It was not mentioned if it fitts the CZ P01/ compact... Hope it does

[@Blebobeep7492]

Did it fit your p 01

[@iZephiroth]

Is the trigger compatible with the CGW reach reduction kit? Thanks in advance.

[@rogerzobrist4211]

Work perfect 👍

[@paulhagiantoniou530]

Awesome 👏

[@TheHoyeah69]

How do you stop the grub screws from moving? I've found that the over/pre travel screws always move even you put locktite on it. And it always come out at the worst possible time, ie, when you are in a match competing.

[@paulhagiantoniou530]

Hello Jim Always use loctight blue on these types of screws, you can use red but will need heat to loosen, I apply blue and it works well. Further I always check the pre and overtravel on my triggers at my regular service intervals

[@CZIndonesia]

I always recheck before big match for the screwa

[@wvultra]

Hi Paul! Wondering if the Gold (brass) Ultimate Trigger will "tarnish" with use, over time, from the natural salts emitted from our skin? If so, would it be easy to restore the factory finish? Thanks!

[@zarinkai2927]

Would love to buy the thumb rest slide stops. But not available in US . 😢

[@paulhagiantoniou530]

Hello King, try Dot40 and Hardball ballistics, both in the US and distributors of Eemann Tech

[@as685030]

Check with Hardball Ballistics to make sure you get the one that will work with your gun.

[@Maddaxes]

I like the eemann tech products but I wouldn't get the thumb rests. I shot it during a match and my slide kept on locking back

[@davidgibbs1083]

So this trigger by itself is a reach reduction kit and will allow you to adjust your reset

[@deckeogh]

Hi Folks, is adding this trigger to an IPSC Production Gun permitted: 18.4 Aftermarket springs and trigger assemblies are permitted.? Does a full replacement trigger qualify? Thanks

[@polluxxullop5304]

Section 18.4, Appendix D4: IPSC Rulebook, Production Division „Aftermarket springs and trigger assemblies are permitted.“ www.ipsc.org/pdf/RulesHandgun.pdf

[@deckeogh]

@@polluxxullop5304 Thank you

[@paulhagiantoniou530]

Hello Sir Trigger assembly is the term used in the production ipsc rules, our kit is an assembly as it contains a number of parts

[@hardcore4476]

My trigger spring to the ultimate trigger failed not to long after buying it. How can I get a replacement?

[@BitcoinNBullets]

I had to remove the too screw completely to get the double action trigger pull to work correctly. I tried it in completely through to all the way out of the gun and all the way out is the only way DA works. Any tips? My pull measures at 6 lbs DA and right at 2 lbs SA. Does this sound about right? Thanks in advance.

[@paulhagiantoniou530]

Sounds good Jason, the trigger will get better with time too. The pre travel screw is sometimes not required depending on the individual guns tolerances, some benefit from having the pre travel screw as it helps to remove any, if yours has none it’s a good thing. Setting up the over travel screw is a little tricky to actually catch the over travel. I will do a short video to demonstrate how I catch it

[@BitcoinNBullets]

@@paulhagiantoniou530 thank you for the reply

[@johnkendall6114]

That's the answer I needed, thanks Paul!

[@zoomzoom3345]

Do you as EEAMANN Tech produce short reach trigger system similar to RRK of CajunGunWorks?

[@paulhagiantoniou530]

Not at the moment Zoom, however the pre travel screw on our Ultimate trigger can eliminate allot of the pre travel which in turn positions the trigger further back in the frame

[@zoomzoom3345]

@@paulhagiantoniou530 Thank You

[@cesargomez490]

Can I order ultimate trigger and trigger tool? I am from the Philippines.

[@HighCappa45]

Does anyone know if this trigger work for the CZ 75 P01 cause it says it works for the 75 so I’m guess that’s all the variants???

[@StrangersIteDomum]

Looks just like Cajuns "flat" trigger

[@rafaelfranco9659]

Does this trigger worth for shadow 2 compact???

[@rafaelfranco9659]

IM from Chile, how can i get one??

[@MrRazerguy]

i recently installed your new trigger, but i had to remove the pre travel srew, because the trigger doesnt reset for double action pull. (I'm running a shadow 2) I have to say the the zero disconnector (0.2) from the shadow 2 orange ist in my configuration and not you eemantech disconnector.

[@MrRazerguy]

i also have to mention, that there is almost no pre travel right now on double action pull

[@PeacemakerPL]

Any chance for flat trigger for P07 / P09 with decocker?

[@as685030]

Do any of these triggers work for the CZ 75 D (PCR)? Any adjustable rear sights for the PCR?

[@as685030]

@Jan Holcomb I bought one and it did NOT work with my PCR or my 97

[@thegunshowguy]

Will this fit in my 75p01?

[@Frostfactor88]

Hi all, is the pin holding the trigger with the trigger bar a solid pin? Or is it similar to the factory trigger pin that is staked?

[@dmitrieemann]

its a solid like a factory

[@Frostfactor88]

@@dmitrieemann thank you for the information. Much appreciated 👍

[@Aureliopuglisi]

Hi, I bought the latest model of the Trigger, EEMANN TECH ULTIMATE TRIGGER the slightly curved one, for CZ Shadow 2, but I noticed that neither the 3 mm nor the 4 mm dowel can be used, as putting the 3 mm dowel (the shorter one) if you tighten it to adjust the pre-stroke, the trigger is blocked. I would like to understand how to do it. Thank you in advance. Ulteriori informazioni su questo testo di originePer avere ulteriori informazioni sulla traduzione è necessario il testo di origine Invia commenti Riquadri laterali

[@dmitrieemann]

If its blocked, you need to remove it. Recommended to use with frames with big tolerance. Just remove this screw.

[@yn365-mw1hm]

Αν δεν έχουμε το χάλκινο εργαλείο, δεν μπορούμε να εγκαταστήσουμε το ελατήριο με το χέρι;

[@chefistopatrick385]

@eemann Tech - is this ultimate trigger 130084 is the upgraded version of the eemann tech sa/da flat trigger?

[@dmitrieemann]

Hi, no, its a different model.

[@chefistopatrick385]

@@dmitrieemann what trigger do you prefer between the ultimate and the flat?

[@chefistopatrick385]

@@dmitrieemann i also upgraded my cz shadow with ET-130052

[@dmitrieemann]

@@chefistopatrick385 Ultimate is not so specific, like Flat. Who really need FLAT trigger, choosing flat, but if you just dont like CURVED original trigger, your choice must be ULTIMATE model

[@sandlotpass]

Will the ultimate trigger fit on the alloy framed CZ 75 P-01?

[@dmitrieemann]

Yes, will fit

[@luckydog4044]

Can I use this trigger when converting my shadow 2 to SA?

[@dmitrieemann]

Hi, for SA you need to use SA trigger

[@maniotas1]

Which companies in australia stock these?

[@maniotas1]

@paulhagiantoniou530 can you let me know where I can buy this from in Aus?

[@zenonayala9557]

Is this technique good for a CZ 97

[@dmitrieemann]

Yes, you can use it with CZ97