Inside a CZ Shadow 2 - Trigger Explained (revised)

[@SEAKPhotog]

Great info. Thanks! One suggestion that has improved a "gritty" DA on a couple of my CZs (even after polishing all the trigger components) is to polish the edges of the main spring plug, which can be very uneven/rough/sharp. When pulling the trigger in DA, one is compressing the main spring into the plug. If those edges are very rough, it can absolutely be felt. I was pleasantly surprised by the improvement it can make and it's not something I see mentioned very often. Cheers and thanks for your informative videos!

[@TheGentlemanGunner]

It’s intelligence and understanding like this is why I have you work on my S2s… I can do it… but I KNOW you can do it better 🔥

[@JoMamasHouse]

This is something I’ve always been looking for. Here’s the parts, here’s their function, here’s what they impact with respect to trigger function. Thank you so much!

[@czarmorer]

I'm glad you liked it!

[@ACxREAL]

Woo get some! As always great video.

[@czarmorer]

Thank you! I'm glad you enjoyed it :)

[@eduardogallardo9474]

Excellent video! Very infornative and explanatory. I now feel like i finally understand a topic I did not before and what makes CZ triggers better!

[@czarmorer]

thank you! glad you liked it.

[@trevor8087]

@@czarmorer @CZArmorer Do you do your gunsmithing out of Texas the reason I ask I because I live in the Dallas Fort Worth area and would like to have you work on my Cz

[@czarmorer]

@@trevor8087 Yes sir, I live in Keller, TX. Find me in Instagram for us to chat about it (@CZ_ Armorer is my handle in IG)

[@trevor8087]

@@czarmorer I don't have insta

[@budddyrda]

Excellent video. Can you do one for the DWX? Thanks for the information.

[@czarmorer]

@@budddyrda it would be the same as for a 1911 as the DWX basically uses a 1911 ignition system.

[@Rothbardy]

Can you do a detailed video about how the disconnector works? The different parts of it and how it interacts with the trigger bar/sear? Single action vs double action and all. Thank you for the videos!

[@czarmorer]

was thinking about one fitting an after-market one. I can cover that on the same video then. Stay tuned 😀

[@sen8989]

Thank you for the nice video

[@czarmorer]

glad you liked it!

[@Chabster]

Damn, this is great. I wish there was a 3d animation to represent everything in action, but I guess this is a huge chunk of work. Do I understand correctly that conversion to SA is literally achieved by removing the disconnector piece? Even without changing a single other part?

[@czarmorer]

gotta change the trigger shoe as well. The position of the trigger when resting is different between SA and DA.

[@jpradasdiez]

Nice video!!!

[@czarmorer]

thank you!

[@herminigildodelacruzjr1752]

Very helpful sir thanks

[@onpsxmember]

Extended firing pins, better not drop it then. So far 2-0. Once in Canada, once state side. Good video, I'll check out more.

[@llend07]

Thank you

[@czarmorer]

You're welcome

[@trevor8087]

@CZArmorer Do you do your gunsmithing out of Texas the reason I ask I because I live in the Dallas Fort Worth area and would like to have you work on my Cz

[@czarmorer]

I do - and we've been in contact via email already.