I really like the idea of this kit. I have a 1955 GMC that we put a chevy 350 engine in and i feel like the only problem with it is the fact that its not EFI. I love EFI over any carb operated vehicle. This is worth it.
@thedobermangang35033 жыл бұрын
VERY GOOD VIDEO MY BROTHER
@ricklent65612 жыл бұрын
Great video! Thank you 👍
@franciscomacias96036 жыл бұрын
Was interested in doing this on a 89 GMC C3500 454 block. Ca DMV said I can't do it, wouldn't be street legal and I woul fail smog automatically.....you would thing that this system would be ok to switch from carb to efi on older vehicles.
@billcarson41718 жыл бұрын
good technology, I loved it!
@rockinpip42128 жыл бұрын
go with fitech they are half the price and work just as well if not better
@usmandogar59464 жыл бұрын
Hi you doing well. Plz share the detail of fuel injection timing. How does it nake the fuel injection timing?
@GJJC134 жыл бұрын
Excellent! Does it provide any type of mpg savings in regular city driving?
@doctube20206 жыл бұрын
It's the Junk Yard Gold guy!
@ClassALiving8 жыл бұрын
omg i have to get this, such a sweet kit i love it
@dennispeaks3 жыл бұрын
What about a 76 Eldorado convertible with EFI, what do you have to replace that?
@frankolvera13375 жыл бұрын
Can you get a old school crate engine and slap one of these on there ?? I have a 79 5.8 2 barrel ford engine. That still runs. Wondering if I could throw it in a 92 f150.
@bobbg90418 жыл бұрын
Can I put this on my lawn tractor? it a 2 cylinder 2 stroke. Its putting out 650 HP at the blade, but I'd like to get 1200 HP at the blade.
@arnoldodida6 жыл бұрын
Is it a universal fit..i have a datsun engine and am thinking to replace my carburettor
@czarpeppers62508 жыл бұрын
This probably wouldn't work with my Caprice's 80's style cruise control, would it? Also, would it be compatible with command start units? That's probably one of the main reasons why I want to switch over to EFI.
@josuelara72228 жыл бұрын
man wish they did a dyno before n after
@olpappy99639 жыл бұрын
would this unit work on top of one of the small blowers such as a 142, 144, or 177? Wanting to put this setup on my Goodwrench crate 350, thanks.
@AngelGomez-nd5cw8 жыл бұрын
I bought the unit but not happy I get no fuel pressure on my hand held gage . any sugestions would help thanks
@brandonnufer36709 жыл бұрын
I have a 1970 corvette stingray with an old efi installed into the system, i would like to take it off and go back to regular carburated. Is there a video link to change back to that? If its easy enough can i just take out the computer/ injection system/ etc. and it should go right back to where it was?
@Amir_Yah8 жыл бұрын
+Brandon Nufer it's easier than what the did on your corvette. just remove the injection tbi on the manifold and install the carburetor... there is no need to remove computer or anything else... I don't know whether the fuel pump is electronically controlled or not but if it is, you have to use your stock pump.
@leonardomerlino63839 жыл бұрын
Hi! I have a Mercedes Benz 280TE with a M110 engine. It has a mechanical bosch injection system but I would like to change to this EFI system. Will this work for me? I know I have to make a custom intake manifold.
@BraveBlastMaster7 жыл бұрын
What if you have a 1985 Chevrolet K10 with Dual Gas tanks ? Will the efi work with the truck having two gas tanks ?
@doctube20206 жыл бұрын
I have a 79 K10 with dual tanks. You either buy the FiTech fuel delivery pump which has mixed reviews or on MSD Kit put this pump AFTER the selector switch on the single line towards engine. Then you switch selects either tank and the pump will pull fuel from either.
@4MATAStudio6 жыл бұрын
Do they make these for a dual tunnel ram setup?
@Amir_Yah8 жыл бұрын
does it need to change the stock HEI dist?
@mousetoad70404 жыл бұрын
How easy is it to replace a sensor when it goes bad? Modular designs scare me. My father put a water injection system on his car decades ago, the potted electronics went bad and the company is gone. no way to repair. I like the simple install though, just don't know where I'd get a a modern distributor to fit my Jeep (Kaiser)327 engine...
@mr.funkyright7 жыл бұрын
I wonder if it works any good with plg?
@kristamercedes37236 жыл бұрын
Holy crap that's sweet
@ZylarB9 жыл бұрын
why dose no one ever mention what they do with the mechanical fuel pump?
@ritaacevedo91865 жыл бұрын
eliminate original put metal plate
@darronlemell2244 жыл бұрын
Nerd
@DDIAZ-we4dz8 жыл бұрын
this work with a 408 stroker?
@codyharless46358 жыл бұрын
i have a 2003 chevy s10 with the 4.6L v6 in it along with a 4l60e automatic trans. it has stock fuel injection on it, but I want to upgrade it using this and a carb intake manifold, does anyone know if that will work or not?
@zach74596 жыл бұрын
Ew. Leave it alone or put a small block in it.
@WyzaNagui9 жыл бұрын
would this work with a 13b rotary? My rotary has a carb.
@EcklersAutomotive9 жыл бұрын
Sith Strawberrynutz Sorry but i don't think it would work without some sort of modification.
@adamewing16536 жыл бұрын
Could this set up work on an inline straight 6?
@coopmm20008 жыл бұрын
Would this work on a 22r?
@jonatavuki89127 жыл бұрын
i wonder if anyones ever tried this on a 1985 olds cutlass yet ??
@Stuart_Houston8 жыл бұрын
Wow only $2,500!
@Celticman1978 жыл бұрын
Not as easy as it looks. Will not take original throttle assembly on my Thunderbird. Required modification, might have to weld it to unit. A lot of extra wiring. If you mount pump in tank, it is an all day job. Big hassle. they gloss over a lot of things in the video.
@jonatavuki89127 жыл бұрын
i wonder if anyones ever tried this on a 1985 olds cutlass yet ??