Nice ! wish I'd had this in the 60's :-) ....thanks for showing the set-up...
@kevinwright50963 жыл бұрын
Coolest light show feature IMHO is where the tail light goes RED as you are descending, GREEN as you climbing....and WHITE as you are maintaining your current altitude. Very handing in night gliding to have "visual variometer" !!
@TheRCAirMarshall3 жыл бұрын
Yep, that is an awesome feature. Also pretty slick how the lights will start to light up the whole plane the higher you go, and when you get past 400’ they start turning orange. LoL whoopsie! Thanks for bringing that up though Kevin I forgot to cover it in the video!
@georgewatts93613 жыл бұрын
The lights are impressive 💥💥💥
@georgewatts93613 жыл бұрын
Lights are impressive 💥
@DronemanJoeRc2 жыл бұрын
Bud you have done the best install and demo of this mod for the bird that Is on KZbin. Great Great Job. and thank you!!
@TheRCAirMarshall2 жыл бұрын
Thanks 👍 Really appreciate that!
@mapleacrefarm2 жыл бұрын
Dave, thanks so much for the awesome review! I would like to point out that we have firmware version 1.2.4 available. If you are running firmware 1.2.4, please do not change the endpoint throws on your transmitter. Version 1.2.4 introduced auto sensing of the signal range, so after you power up, simply roll your transmitter knob from low to high and the controller will automatically set the endpoints according to your signal.
@DronemanJoeRc2 жыл бұрын
I have this bird and wingnut board coming would you recommend install this board b4 I bind it up with he existing setup?
@DronemanJoeRc2 жыл бұрын
a great suggestion is do a video of your own to install it and give extensive details for the install. Im sure if you did that it would be a great video!!!
@mapleacrefarm2 жыл бұрын
@@DronemanJoeRc It doesn't really matter what order you do this. You can go ahead and bind up your radio and make sure everything is working there first, then install this. That way you know the radio link is working correctly before connecting any accessories. Your order is in the next batch to be shipped. All this attention has really swamped me, and I'm trying to keep up with the orders! LOL
@DronemanJoeRc2 жыл бұрын
@@mapleacrefarm mine already shipped so thanks bud and I hope I can count on our support if I need it? thanks
@DronemanJoeRc2 жыл бұрын
@@mapleacrefarm any idea on when it will be shipped? your going to get alot more and please have it updated for the latest firmware so I can get this hooked up and going and thanks.
@snoriverrc38424 ай бұрын
We miss you Dave :)
@jlester422 жыл бұрын
Wow, what a great video. Thank you! Made installation a breeze. Hint; the light wire going to the back that has the choke on it, is the tail; the other is the fuse. Unfortunately my night Radian came with defective light strings in the vertical stabilizer and the right horizontal stabilizer. they light, but not correctly. Was hard to identify when I first got the model.
@georgewatts93613 жыл бұрын
Nice 👍 job Dave.
@mostlymissiles3 жыл бұрын
I've had the wingnut controller for 9 months, love it
@snoriverrc38422 жыл бұрын
Thanks for the easy walk-thru Dave. I just followed along and it works perfectly. Cant wait to try it out on the maiden.
@victorrcjets76603 жыл бұрын
Nice job Dave! 👏
@LoveRC2 жыл бұрын
Thanks Air Marshall. Your video was the most easy to follow. I got it done last night. Works Great!!
@brianchambers15153 жыл бұрын
I have had my Wingnut since last year to put in my old night radiant lost instructions this video will sure help now thanks Dave
@alangentry62953 жыл бұрын
Nice Dave thanks for the info
@WildBillFlysRC3 жыл бұрын
I need that.... Thanks! Great job with the video.
@davidsnyder2383 жыл бұрын
Nice little tech walk through on the light controller Dave. Easy install and setup with lots of cool features! Sweet!
@ronforthehillsmining24323 жыл бұрын
Well done as always
@116dwi2 жыл бұрын
Very helpful - Thank you. Worked perfectly right from the start.
@insurancemann13 жыл бұрын
What a helpful video, thank you! I really appreciate how thorough and professional your videos are. I'm ordering one of these, I like how it cleans up the canopy area also.
@epicrick2 жыл бұрын
I got mine a few days ago and was waiting to get a positive response from Amainhobbies on my new Night Radian right wing light array not working out to the end of the wing. If they don't fix it for me I'll install it anyway and just adjust the lights to fit my needs. This is the best video for this install by the way. Just the facts and no fluff.
@DeucesWildRC3 жыл бұрын
Easy install and well worth it, been enjoying mine a lot these days or should I say nights lol, I get a lot of compliments and spectators when I fly this at night ✌️
@TheRCAirMarshall3 жыл бұрын
Same here! Hah. Everyone at the field stays after dark when I bring the Radian out
@joepellegrino78133 жыл бұрын
Another great how to video, thanks Dave
@paulmcneil55292 жыл бұрын
Thanks for a killer video I'm gonna buy a night Radium.
@DronemanJoeRc2 жыл бұрын
I finally got mine to work after 3 wingnut controllers and faulty led strips its running right. Brian at wingnut was awesome he stood by his product and HH sent me 2 sets of led's bc the first box was faulty and after about 40hrs of messing with this its finally working. I was about to give up. I also noticed that I saw more light displays with the stock controller than with the wingnut, correct me if im wrong and I got the latest firmware upgrade mod.
@LoveRC2 жыл бұрын
Yes the stock controller has more shows but it does not have nav lights with strobes and the ability to change in flight.
@TheRCAirMarshall3 жыл бұрын
Thanks for watching my installation and setup of the Wingnut Tech LED Controller for the Eflite Night Radian! Please consider using the links in the description to purchase your Wingnut Tech LED Controller and Night Radian! Visit rcairmarshall.com for links to all of our affiliate partners where you can get everything you need to Change Your RC Life! Please Like, Share, Subscribe, and turn on your notifications! Happy Flying!
@vitale6633 Жыл бұрын
Thank You for compiling this instructional video. Followed your steps, works like a champ!! I do need to fix part of my left wing LED light string - there appears to be a disconnect about 2/3 of the way out. Not an issue with the controller as the same thing happens with with factory controller. Any suggestions on how to fix that are always appreciated.
@JustFlyIt092 жыл бұрын
Just order mine! Looking forward to it.
@Wings_of_foamАй бұрын
I just ordered the Night Radian. When using the balance lead for the lights, I guess I won't be able to use my lipo buzzer? So I have to use Spektrum batteries? That's a bummer.
@barrettfait69112 жыл бұрын
Just installed mine but it doesn't work. The Wingnut site says it doesn't work on BNF Night Radians without doing some programing. Apparently this requires a special cable and some software. Looks like you have the 631 receiver that comes on the BNF version. Did you have to do the programing?
@knpjdad2 жыл бұрын
Just ordered one!! Thank You!!
@mikenowland27393 жыл бұрын
Thanks for the vid Dave 👍 I’ve had the Wingnut controller for long time but haven’t fitted it because I I have the Flite Test Radian where you have to get a program cable and unlock a channel on the receiver that Horizon had disabled . Looks like with the new one you don’t have to do that.
@TheRCAirMarshall3 жыл бұрын
Nope, on the AR631 channel 5 and 6 are active.
@mostlymissiles3 жыл бұрын
Really easy to unlock the channels
@dfrost423713 жыл бұрын
Great video!
@paulmcneil55292 жыл бұрын
Thank you for the video it made it so easy.
@michaelspunich7273 Жыл бұрын
Are you able to change the sped of the lights, like with the stock controller?
@PigParts2 жыл бұрын
I had to cut out a faulty LED pixel in the middle of my RH wing (brand new purchase) to get the display to work. While I was at it I reversed the nose strips so the LEDs faced outwards and not at the battery. Although I have not counted the number of displays yet it seems the std setup has more "shows" than the Wingnut some of which I will be sorry to see go.
@stevelhamon2031 Жыл бұрын
Are you able to turn it off?
@DronemanJoeRc2 жыл бұрын
I want to give some advice so you know what wire is the tail and what wire is the fuse. plug a battery in and pull each plug out and see what is which and label it with some tape so you know what plug is for the tail and fuse. just a helpful tip
@Ahkeys823 жыл бұрын
Great video Dave. Was the extra channels on the reciever ready for use or did you have to program it so channel 5 would work. I don’t think my extra channels are “hot” so to speak. Thanks
@LoveRC2 жыл бұрын
On the Night Radian 2.0 I was able to use channel 5 just like Air Marshall. It is the gear channel. I assigned the control knob to channel 5. I did not have to do anything special. The Wingnut site mentions you might have to update your receiver and unlock it but I did not have to do that. Safe and the light controller work fine.
@Ahkeys822 жыл бұрын
Dave, when I go to the monitor page and turn my knob the gear, Aux 2 & 3 all show motion. When I get to 100, my rudder kicks hard right. Any ideas?
@Ahkeys822 жыл бұрын
Ok, for some reason, aux 2,3 were also assigned to the rotary knob. I turned them to inhibit. My lights still glitch so I plugger them into channel 6 of the receiver, which is good, and the lights all seem very happy. The rotor knob is assigned to AUX1 and works great. Go figure
@215cyclone2 жыл бұрын
Doesnt this have a vario (altitude) mode that changes color too ?
@Ahkeys822 жыл бұрын
I saw a video where it showed the LED vario. It was pretty cool
@richardhensley8281 Жыл бұрын
Do you have a video on the evolution timber bind on the NX receiver?
@stevebilogan62492 жыл бұрын
But I could use some help also just bought the new night Radion I like your idea being able to control the lights with the transmitter so I bought that wingnut as well the number on it is 131 have everything hooked up lights come on blinking red blinking red have everything hooked up exactly the same way you did but the red lights are blinking I’m at a loss don’t know what to do it’s a shame nowadays you try to call somebody up and all you get is a machine I tried to get a hold of wingnut see what advice they would have and that’s not working out either also have the same receiver you have the local hobby shop how to program the failsafe in the receiver I’m sure they’re getting annoyed with me every time I have an issue with this plane going back to them maybe you have some advice thanks Steve
@DronemanJoeRc2 жыл бұрын
it took me 3 mods from wingnut to get mine to work, I emailed Brian at wingnut and he actually called me to walk me threw it bc of all this issues I was having. it seems to be working now, but I noticed that there are more light displays on the stock controller than you get with the wingnut and I also have the 131 version. I spent about 40hrs working on this and I was about to give up, but im just going to accept what its doing bc I like the idea of controlling it threw the trans.
@stevebilogan62492 жыл бұрын
@@DronemanJoeRc thanks for the response I finally did get it working right my transmitter is the DX9 if you want to get more lights set the servo to 150 The switch I’m using is the Dail. know thanks again Steve
@DronemanJoeRc2 жыл бұрын
I have this bird and wingnut board coming would you recommend install this board b4 I bind it up with he existing setup?
@TheRCAirMarshall2 жыл бұрын
It really doesn’t matter. It might actually be easier before you bind it since you have to rip out all the old stuff and connect the Wingnut controller to the receiver.
@DronemanJoeRc2 жыл бұрын
Bud help me out the system seems to be set up for Aux1 channel 6 bc gear 5 switch A is reserved for safe and as3x normally on most set up's so why did you choose channel 5 and not 6 aux1?
@TheRCAirMarshall2 жыл бұрын
Only in rare instances are you truly locked into a specific channel for SAFE/AS3X mode selection. Like UMX planes, you’re pretty lock-in in there. Any plane with the AR636/637/631/630 you’ve always been able to assign SAFE Select to whatever channel you want. So I put SAFE Select on Switch B, assigned to channel Aux 2 to free up all the PWM outputs. This lets me assign whatever I want to the servo pins, like this light controller for example. And I still have Aux 1 available if I want to use that for something else.
@Bombana012 жыл бұрын
hi..hopefully its not too late for asking but is it possible to switch the lights on and off from the trasmitter?
@TheRCAirMarshall2 жыл бұрын
Not completely, no. You can cycle through all the different modes, and one of those light modes is everything off, but the navigation lights with the strobe stay on all the time if you have them enabled.
@robertjohn92812 жыл бұрын
I have spectrum dx8 gen 2 , i did everything you did with the stock receiver and channel 5 and i get zero output to the light controller > it has stumped my guys at lhs ! it works fine with ar610> with out safe i wrecked the night radian (pissed) > so gluing back together i still would like to know did you use night radian safe receiver ? did you do a foward programming to get channel five to work with the new light controller ? by the way ! plugged into channel 5 the light controller works but only manually !
@TheRCAirMarshall2 жыл бұрын
Are you using one of the new Night Radians with the AR631 receiver? Or one of the Flite Test Night Radians with the AR636 Receiver?
@robertjohn92812 жыл бұрын
@@TheRCAirMarshall ar 610-x yes i think its flight test
@TheRCAirMarshall2 жыл бұрын
The AR610 should work fine without any special programming. Have you assigned the knob to channel 5 in Channel Assign?
@robertjohn92812 жыл бұрын
so you are saying i need the next one
@TheRCAirMarshall2 жыл бұрын
I don’t understand. I’m saying it should work fine with the receiver you have in place once you get the transmitter knob assigned to channel 5.
@DronemanJoeRc2 жыл бұрын
what I always say is when the bird is upside down the left is right and the right is left not to forget that