Eflite Viper 90mm EDF Jet 6S 1400mm BNF Basic with AS3X and SAFE Select Assembley & Test run

[@kleinersoldat472]

I really like that Horizon seems to have chosen you as one of the very first people to test this plane WORLDWIDE! I am really looking forward to the maiden flight! Big salute from Austria ;)

[@PetrincicBrosRC]

We had a dream my friend many years ago and with hard work we are living them at this point. Thanks for all support and big salute back from Slovenia.

[@russc3288]

Blaz really out did himself this time. He assembled a foam plane and actually got excited. This is a first. I'm not a Jet guy but this one is extremely beautiful and seems to have more than enough power. Good luck on the maiden. Salute to all the other brothers. Russ NC/USA

[@PetrincicBrosRC]

Well I was really impressed by Captains impression this time. Thanks Russ. Maiden on Monday.

[@williamrobinson7435]

HUGE enclosure for the EDF.. So smooth sounding.. Quality bearings on undercarriage AND motor.. The power must be amazing. Can't wait to see this Smooth Operator doing its funky thang.. Big salute from London.

[@PetrincicBrosRC]

This will be flight to remember.

[@elpunto231]

This plane is just made to perfection...

[@Kane13zG]

I think Captain Blaž really enjoyed assemble this plane. Can't wait to hear the EDF unit screaming on the runway. Goodluck and Big SALUTE!!! 🌈🍄❤💜🤍🖤🤎💙💚💛🧡🍄🌈🤩

[@PetrincicBrosRC]

He really likes this plane so much. Intersting for balsa lover. But the bird is really great and sexi.

[@elpunto231]

Yes i did..it was ultra fast...

[@jasonsfilmcameras1420]

OH YEAAAH a build video now this is something MORE of these please.

[@PetrincicBrosRC]

We do it from time to time if we know that we can do it fast ;-)

[@ROLXXII]

@@PetrincicBrosRC I know you guys have busy lives, but it would be so good if Blaz could do a build video on how to install and setup a gas, nitro or glow motor, connecting the cdi, fuel tank and how to set it up with the receiver and radio. I have only even flown electric planes and would like to have a few planes run on real petrol. They sound so amazing, but I have no idea where to start hey. Salute!

[@PetrincicBrosRC]

@@ROLXXII We are planing to do that my friend. But at the end its like with electro planes. You must still follow instruction manual. Even more then on foam planes.

[@pedromonteiro2941]

Both Vipers look GREAT ! Happy Flying !!

[@PetrincicBrosRC]

Like big and small brothers. Thanks Pedro.

[@mikebird8290]

BIG SALUTE FROM ENGLAND LADS. GREAT BUILD REVIEW OF AN AMAZING PLANE. THANKS FOR BUILDING BLAZ'. SO SO LOOKING FORWARD TO SEEING THE MAIDEN ROBERT. TAKE CARE MY FRIENDS FROM SLOVENIA 🇬🇧🇸🇮

[@PetrincicBrosRC]

Hey Mike. Maiden on Monday I hope.

[@smithaviation]

A big salute to the both of you from Virginia Beach 🏖️ USA 🇺🇸 looking forward to the maiden flight video

[@PetrincicBrosRC]

Big salute back Willie. I hope on Monday.

[@ratelmike8825]

Both planes and their paint schemes just look the boss guys!!!

[@PetrincicBrosRC]

They are so beautiful to me. Really.

[@belowme70-1]

Yes the perfect dynamics here, the EDF master and the Engine Doctor all in one place! Thanks for your great reviews brothers!

[@PetrincicBrosRC]

I would love that we would be both more on the camera together.

[@belowme70-1]

@@PetrincicBrosRC Ironically I was thinking this at the time of my comment, formation flying the vipers would be an awesome video!

[@dandanthedandan54321]

Captain Blaz: “Again 35 minutes” Pilot Robert: “But how can that be?” Priceless!

[@PetrincicBrosRC]

I was really surprissed ;-)

[@elpunto231]

This is just crazy :))

[@michaelmclaughlin3925]

You guys are a trip...I think you need a buddy with another turbofan identical to the blue one and then fly in formations.

[@jrb8081]

This will be a grand maiden flight , The jet is very beautiful good "luck" I can not wait to see this one in the sky.

[@PetrincicBrosRC]

Maiden was amazing my friend.

[@ichristosable]

Good morning!!!!

[@PetrincicBrosRC]

Good morning my friend.

[@JohnHill-jm7tm]

Look at Dis 😘. What a great looking plane. Awesome video. This Old Man from North Carolina enjoying with my coffee ☕☕. Love you two 💝💝

[@PetrincicBrosRC]

Such beautiful piece of art my friend.

[@DadsRCHangar]

She is well built, very detailed with hinges and undercarriage etc. They do look good together on the table. Looking forward to the burner led👍🏻

[@PetrincicBrosRC]

Oh she is my friend. Everywhere you look. I cant wait to maiden it.

[@elpunto231]

Yes they have done thers job this time...

[@jeepman012]

Very nice, can't wait for the maiden, oh yeah...

[@normleonard52]

That is sweet. Can't wait to see you flying it and hear what you have to say about how it flys.

[@PetrincicBrosRC]

I cant wait my friend.

[@free-birdrocker8809]

Viper jet assembly, that went together easily. Man that bird turned out nice. That engine has some serious thrust, so it should go into outer space. lol, Great video assembly in the shop of the Petrincic Bros. RC hanger. Big Salute, lets see her fly. Yehaw!

[@PetrincicBrosRC]

Iam really impressed my friend.

[@GeezerDust]

You guys are fun to watch. Enjoyed.

[@PetrincicBrosRC]

Thanks for stoping by.

[@ratelmike8825]

What an amazing looking jet and model. Well done Eflite and Horizon hobbies. Most of all Salute and thanks to you lads, absolutely brilliant assembly and set up video.

[@PetrincicBrosRC]

Thanks Mike. They have done great job on this bird.

[@stevearmett1565]

Very easy assembly wow lovely looking jet Eflite quality seen here !! I recently purchased a second hand Eflite Nightvisionaire and the assist AS3X gives you in the wind is sick but you still feel in total control beautiful planes to fly so impressive how it works and the safe I have tested it and the quickness of the correction is unbelievable ! Salute to you both great great video 👌😁

[@PetrincicBrosRC]

I really love AS3X. And also to know SAFE is there just in case.

[@MikeSmith-fk1fl]

Good morning guys, can't wait for the maiden this will be awesome. Thanks guys Salute from your Friend in Bainbridge Indiana, stay safe!!!!

[@PetrincicBrosRC]

Hey Mike. I hope on Monday. We have rain now.

[@rcmodellfly8401]

This is the first Comedy Model Plane Assembling Review I've seen! Very Funny!

[@PetrincicBrosRC]

Iam glad you like it my friend.

[@airhammer6203]

Salute from Minnesota USA! Great video guys. Love that sound. AirHammer out!!

[@PetrincicBrosRC]

I cant wait to hear the sound on runway.

[@TruSwagTv2]

You guys are my favorite duo

[@914va]

Great video guys! I can never afford this beauty, so I will really enjoy watching the maiden flight.

[@PetrincicBrosRC]

I hope for good weather on monday.

[@frankienv3906]

These planes assemble so easy, they snap and click together like the kids toy LEGO's ...lol I'd like to see how much thrust that jet pulls on the scale!

[@PetrincicBrosRC]

We have ruined the scale and I always forhet to order new. But i will now so we will test it in the future.

[@charleshart6992]

Very nice - looking forward to seeing this fly!

[@PetrincicBrosRC]

I really hope for perfect maiden my friend.

[@wmnsriteslol]

I love you guys and your energy. Just loving the hobby...and so funny. Hi from Canada.

[@PetrincicBrosRC]

We cant imagine better hobby my friend.

[@bigeclipse718]

Hi from the U.S.. you guys are very funny. Keep the videos coming!

[@PetrincicBrosRC]

Thanks for support.

[@JeffinLowerAlabama]

Oh yeah great assembly CPT Blaz and Pilot Robert. Saw the 90mm Viper flying at Jet Jam by Team Horizon it flys amazingly well, Going to be a hard one to get because it's great. Looking forward to the maiden. Jeff in LA USA

[@PetrincicBrosRC]

Its really awesome. Hope to maiden it on monday.

[@mgfarmer1]

Hello from the USA found you from theRCSalers.

[@PetrincicBrosRC]

I hope you will have fun with us. Big salute from Slovenia.

[@goldeneye5307]

Waiting to see it in the air .... Good luck

[@PetrincicBrosRC]

Thanks my friend.

[@jstrat121]

Salute from Surprise Arizona.....HEY !

[@PetrincicBrosRC]

Big salute back from Slovenia.

[@HelixRsix]

Can’t wait for this beauty to be up and about lads

[@PetrincicBrosRC]

I can already imagine slow passes.

[@raymartin2074]

Hi guys look like its ready to fly did good so you all have a very good day. Ray

[@PetrincicBrosRC]

I hope for maiden today.

[@iwan6841]

Good morning my friends! that is one beautiful edf

[@PetrincicBrosRC]

Good morning Iwan. We are impressed. Really.

[@vernonlloyd1388]

Wow she is something 😍 pilot Robert and the sound 😗

[@PetrincicBrosRC]

The sound is amazing.

[@ratelmike8825]

Oh the sound is Awesome guys!!!

[@PetrincicBrosRC]

Cant wait to hear it over our runway.

[@MattyThomas86]

Waiting on your flight video, see everyone else has released theres, You boys are the best .,

[@tyfude]

Dying to see you fly this model!

[@PetrincicBrosRC]

Maiden was awesome my friend. But I cant post the video at this moment. I hope soon.

[@tyfude]

@@PetrincicBrosRC great to hear! Looks gorgeous. Can’t wait to see your thoughts on it.

[@NICHOLASRGLORIOSO]

BIG SALUTE FROM CALIFORNIA USA HEY!!! 🤙🤙🤙🤙

[@PetrincicBrosRC]

Big salute back Nicholas.

[@BrianPhillipsRC]

Salute!

[@PetrincicBrosRC]

Big salute back my friend. Good to see you here with us.

[@GREYCAT0307]

I believe the Petrincic Bros are the Kings of RC today! 1st to review this AMAZING plane. :)

[@amegohobbyrc5998]

Brain I'm one of the subscribers of u sir... Keep safe God bless

[@paul340mopar]

Nice to see the 2 best RC Channels on KZbin acknowledge each other........Salute!

[@PetrincicBrosRC]

@@GREYCAT0307 We are lucky ones this time ;-)

[@andrewterbizan9089]

This might be another must have bird my brothers looking forward to the flight

[@PetrincicBrosRC]

Its really like flying some simple trainer plane. And the sound is amazing.

[@realozark2349]

OK, you've made me start budgeting for yet another EDF. I, too, have the 70mm Viper. Now my hangar will need an upgrade. How about reviewing EFlites' 80mm F-16 next?

[@PetrincicBrosRC]

That F16 looks awesome. But I wonder if it can handle our runway.

[@dandanthedandan54321]

Did Captain Blaz get distracted and forget to tighten one of the vertical stabilizer screws??? Quick double check! Love the build video.

[@PetrincicBrosRC]

Thanks my friend. I will check.

[@elpunto231]

Hmmmmmmmm i did miss it??

[@micheleg9492]

I’m a jet lover my friend looks really cool 😎

[@PetrincicBrosRC]

Me too my friend.

[@danielnadj34]

I can’t wait to see the maiden of this beauty. Big Salute from Germany🖖🖖🖖

[@PetrincicBrosRC]

Hope you will visit this year my brother and you can see it in real. I hope you and your family are great.

[@pittsmike666]

Dis is sick and will fly great dear Brothers, i think Robert has won The Euro-Lotto-Jackpot :-))),every two Days a new Plane ,and you do it right ; salute !!!;-)

[@PetrincicBrosRC]

We are really living our dreams in this hobby.

[@therealdeal6846]

Would it still fly ok if you replaced nose for a go pro??..for amazing photography of scenery whilst flying??

[@ROLXXII]

What an amazing plane hey! The plane sounds like it blows loud sloppy kisses during the power-up cycle. 😂😂😂

[@PetrincicBrosRC]

The sound is sosexi my friend.

[@kevosrcadventures9019]

Salute from Alabama !!!!

[@PetrincicBrosRC]

Big salute back my friend.

[@godfreypatrick9792]

perfect for on board camera & fpv 👍

[@PetrincicBrosRC]

Oh yeah.

[@Raptor50aus]

I used to get almost 200 Km/h with my HSD models 90mm Viper on 6S 5000 and around 3min WOT in the air then land. So you guys need to do speed runs and low ! :)

[@PetrincicBrosRC]

That is great my friend. I also have Taft Hobby 90mm Viper.

[@Bellairvideo]

again, Brothers, Well done!

[@PetrincicBrosRC]

Thanks Noel.

[@mrskyrydr]

Slick looking bird for sure! I have 1 question ? Will it bind and work correctly with your Radiomaster transmitter? I will not buy a Spectrum radio ...

[@PetrincicBrosRC]

Oh yeah. And I didnt try to bind it yet with Radiomaster. But i will soon so we will see what happens. But it should work becouse you have Spektrum DSMX protocol inside.

[@SteffenRC]

I'm dying to see this beautiful and sexy EDF maiden flight... Hurry up and upload it... :-). Salute!

[@user-ko3vg7fc7o]

Nice job guys! SALUTE!

[@PetrincicBrosRC]

Thanks my friend. It was such a joy.

[@HAWAII-uh7sc]

Captain Robert, I noticed that your little brother has great respect For you, how much age difference are you from your younger brother?

[@metalscorpionfpv]

Wow she looks amazing my friends salute from Malta 😉🍻👍

[@PetrincicBrosRC]

Really beautiful my friend.

[@DavidSmith-nd6pj]

Good video from sedgley England

[@PetrincicBrosRC]

Big salute back David.

[@vanderheijden1]

Beautiful and sexy plane indeed. Nice video 👍 Cannot wait for the maiden.

[@PetrincicBrosRC]

Piece of art my friend and such amazing flyer.

[@kevosrcadventures9019]

Nice build I am getting a NX8 soon is all the bind & fly already programed in the tx u don't have to set it up right that will be so helpful..

[@PetrincicBrosRC]

I would love to have NX8. Somethimes I have the problem with only 6 channels. And like you said, for EFlote planes you have templates inside and use them for planes. If not you can download them from HH directly in you radio.

[@boazbadihi4505]

very nice i have one of this Robert you are greats

[@Loz636]

This looks amazing and on my Birthday too, should I click it for a present to myself!? OH YEE EeeAA HH :-)

[@PetrincicBrosRC]

WEll happy birthday my friend. Dont wait too long and click quick on something ;-)

[@xKmotx]

It's a real beauty! 👍

[@PetrincicBrosRC]

Even more beautiful in real my friend.

[@elpunto231]

Oh yes she is...

[@jh1982a]

Great review

[@PetrincicBrosRC]

Thanks my friend.

[@smokeymcbongwater3561]

Sweet jet love it

[@RIVER_RADAR]

I like this guy

[@isi3297]

Such an amazing plane. No words to describe it , of course it s expensive but it s worth it. By the way brothers, I was wondering how many batteries LIPO you all have and how you storage them. Could you make a video to show us how you storage your batteries and how you all charge it??? I would love it EYYYY!!!

[@PetrincicBrosRC]

Oh I have a lot. Blaž not so much. He has a lot of glow fuel ;-) I have them in tool box on wheels. Som if they catch fire nothing else would burn. You must take good care of them and you will be OK.

[@isi3297]

@@PetrincicBrosRC thanks for the recommendation!

[@DistinctOgre]

Why still with the Spektrum transmitter? I thought you were RadioMaster guys now? Salute!

[@PetrincicBrosRC]

I cant help myself my friend. DX 9 has been with me for 170 planes and never let me down. And already I have now 15 planes in NX6 and it works great. Open TX is great and I will use it more in the future but I do it so much faster with Spektrum. For now.

[@DistinctOgre]

@@PetrincicBrosRC Fair enough, my friend. Best wishes, happy landings.

[@PetrincicBrosRC]

@@DistinctOgre Thanks.

[@seanpettit6410]

when are u going to fly this???

[@jtepsr]

Hey guys when you put the wing tips on, what is holding them on. Magnets screws, what ?

[@PetrincicBrosRC]

They hook on the wings. Like back fins.

[@theresnobodyhere5778]

living the dream ,,,,,OH YEAHHHH 😊😊😛😋

[@PetrincicBrosRC]

But really my friend.

[@sammyaugusto1742]

Salute 🙋

[@PetrincicBrosRC]

Big salute back my friend.

[@arielmatozzo2744]

Wow very nice

[@PetrincicBrosRC]

Beautiful bird my friend.

[@dhogkellum]

From Texas When are you going to maiden it.

[@PetrincicBrosRC]

Maiden is done but I cant post the video until USA guys will get their planes ;-) There were complains why we have the plane before them. Almoust like in kinder garden ;-)

[@shermanbellmyer5066]

Did you have to set up a switch to reverse the EDF or does it default to a switch automatically?

[@PetrincicBrosRC]

You must set it.

[@tyfude]

Did you fly it today??? :-) Can't wait to see the maiden!!!! Great stuff.

[@PetrincicBrosRC]

On Monday I hope. Blaž is not at home and also the runway needs mowing first.

[@tyfude]

@@PetrincicBrosRC can’t wait to see you guys out there with it!

[@tyfude]

Checking every day for your flight footage. Can't wait!

[@paulsexton8945]

Nice are u using 100c burst battery

[@PetrincicBrosRC]

You got me now my friend. I think its arround 60-70c ? Must check. I have bigger ones but I will use Spektrum one and it should be good enough.

[@andrewmagro7703]

P{pilot Robert i Cant wait to see this Baby , Ive already got this on the list for order from my local store , it is just beautiful - Awesome Jet Big Salute , Capt.Blaz Great Assembly and Now To Test Fly This Beast ohh Yeahhhh

[@PetrincicBrosRC]

I hope on Monday. We have rain now.

[@charlesrestivo870]

Luv luv it

[@PetrincicBrosRC]

Its really beautiful.

[@hammerman47]

Thank you

[@PetrincicBrosRC]

Thanks for stopping by.

[@baaa4698]

Are those metal wheels?!

[@PetrincicBrosRC]

Oh yeah.

[@FromAboveAndBeyondChannel]

Big Salute RC lovers =)

[@PetrincicBrosRC]

Big salute back.

[@bstearn1653]

Nice haircut Captain Blaz hey. Did you lose a bet? Salute!

[@PetrincicBrosRC]

He is lucky to still have hair ;-)

[@RETMTM]

I expect some vertical action now..... 🆙⬆️

[@PetrincicBrosRC]

Oh yeah. We will check the power good.

[@clubaeromodelismograncanaria]

👏👏👏

[@PetrincicBrosRC]

Thanks for stopping by friend.

[@TastierBackInThe80s]

Pilot Robert with a little bit of blue paint or vinyl stripe, it could be a Slovenian Air force jet. These jets are EDF porn, seriously.

[@PetrincicBrosRC]

Great thinking my friend.

[@NICHOLASRGLORIOSO]

**** NO WAY HEY!!!

[@PetrincicBrosRC]

Sexi as hell my friend.

[@mjimstarr08]

I just installed a new stabilizer in my plane and its making it fly up and down like a dolphin .. climbs until it stalls over an over with the stabilizer on and with 3d mode on it doesnt do the wave but now its not stable .. hobbyeagle a3 version2 on a r12ds -- $700 ~$800 in a hole , anyones input would probably help!

[@PetrincicBrosRC]

Check some videos here on KZbin how to set it good. If not seted good its better to not have it at all.

[@mjimstarr08]

@@PetrincicBrosRC My elevator gyro was reversed! didnt feel good to fly it like that but i think i have it fixed now :}

[@matejmatej3554]

29:43 for some reason it looks like Sweden vs Norway just because of color blue vs Red ♥️👏👍🤪😜🇸🇮👌

[@PetrincicBrosRC]

It really does.

[@amegohobbyrc5998]

Soooo good sir like it.

[@PetrincicBrosRC]

Its really great.

[@kmlvr89]

How nice!!! I would remove the wheels from the landing gear and put on excavator tracks....😈😂😂🤗🤝🤗🤝

[@PetrincicBrosRC]

They are really sexi.

[@kmlvr89]

@@PetrincicBrosRC 😍😍😍😍😍

[@davidlaflam2731]

don;t you know how to steer the e flight 70mm jet you always go into the grass

[@PetrincicBrosRC]

Ha ha ;-) You said it good. I was checking after the maiden what the hell and I saw that the front wheel was way off strait line. Really a lot. So that is why the bird was going so bad to the right.

[@hanrenfighterjet]

landing gear lookes grass capable 32:58

[@PetrincicBrosRC]

I think they will work perfect on grass.

[@56chevy11]

1st.

[@PetrincicBrosRC]

Good morning my friend.

[@petergottschalk4524]

600 bucks it's going to be very painful to watch it crash

[@davidattenberg4720]

Put some hair around those holes