EGR DELETE BLANK 1.9 Vivaro Trafic Primastar TVP EASY

[@adventuresinnorfolk4756]

Thanks, great video. I've just done the 180 mod in less than 10 mins following this. I always look to blank the EGR on a diesel if I can and the state of them when I do shows that its worth doing.

[@2rmmotorsport]

Glad it helped 👍

[@s13nicotrico]

Thanks for the effort to create this content and make it very understandable 👍 just did this mod without removing the intake collector - only took the air filter housing off and its really a 30 minute job. Will test the car tomorrow and hopefully this mod will make the car feel more responsive below 2000 rpm

[@2rmmotorsport]

No problem 👍

[@alinutzalin6346]

YOOOO. Didn't know what my problems was. But the guy before me put a blank in. Nice.

[@paulwisdom5383]

Just to say I've been driving with mine unplugged for about 2 weeks. Have yet to have any check engine lights. Mine was clocked poorly so I returned it to normal. It then wouldn't rev above 1500rpm with it plugged in. Unplugged and it works fine. Have left it alone since 😅

[@fperkins581]

Earlier models won’t throw a light, mines been unplugged about a year now.

[@gbcrawler]

@@fperkins581 still has fault lights ?

[@fperkins581]

@@gbcrawler no earlier models won’t show fault light. Mines an 05, I’m not sure what year they started showing a light.

[@b1gn3ll]

Really helpful video! Thanks

[@TheKeenMechanic]

Great video. Very informative

[@sanderssightseers503]

I did this the other day. My EGR was riveted together though so could just pull apart had to grind it apart.

[@brunopaul4104]

thank you for your video, I thought a simple plate was enough ^^

[@BlazenkoJakovljevic-n4q]

In my case turbo lowed thru valve,black smoke and no power. This helped.

[@krzysztofaol2169]

whether turning the egr 180 is a good way everything works fine. I do not have access to such a plug.

[@miralemnermina142]

great video, is this the sam egr valve as on the 1.9 96kw engines?

[@PhilGraf-us1md]

Is there any risk of too lean burning and destroy the pistons or injectors? is there a lambda probe on this trafic 1.9 to measure or is it just desided by the computer how much fuel he enters? how many miles /km did you drive without EGR already?

[@simoncox6184]

It'll never run lean it an injection engine

[@mokahn5920]

very helpfull i was having problem with my renault traffic van lack of power with glow plug light coming on and off so now blocked the EGR valve just the way you showed now my van drives better with the blocked EGR valve but will it have any long term issue after blanking the EGR valve please advice

[@2rmmotorsport]

There's no downside to blanking off the EGR, it's only good news!

[@tomsmelderis]

@@2rmmotorsport apart from higher nox concentration and engine running hotter, as combustion is better due to more oxigen entering the chamber

[@ssdivizion]

@@2rmmotorsport Some people claim that after the blockage of the EGR valve, the temperature in the machine, more precisely in the turbo, will increase and this will negatively affect the plastic and rubber parts that can melt or be damaged, is this true? Thanks in advance for the reply

[@2rmmotorsport]

@@ssdivizion I'd love to see some academic research of that! Always happy to learn :)

[@themagpie_1]

@@ssdivizion hotter..? not sure how as the air/gases your blocking off are the hot ones..if anything, the turbo should be cooler..?

[@stefanmills2266]

Since doing mine I’m getting an intermittent fault like the engine is wanting to stall while idling runs and drives fine apart from that

[@paulgunton1927]

Will this help with the black smoke coming out of exhaust please

[@2rmmotorsport]

No, black smoke is caused by over fuelling

[@mbdaziukai5846]

@@2rmmotorsportwhat the problems is over fuelling?

[@RicardoTomasLopezGarcia-lr2pv]

Lo comenta en inglés pero con las imágenes se entiende

[@sebastianhejnar9526]

Is there any faults coming up after it being blocked and disconnected ? Does it need mapping out ?

[@sammason411]

I span my egr and left the solenoid connected but sadly kept getting a fault code of p0400

[@homer1033]

check you air mass sensor

[@jasonboi7466]

Check wiring

[@magdalenamcgrew9994]

I removed the top part valve and still not running smoothly

[@xchiefxx]

is it easy enough getting the intake off and back on? and will i need a new gasket for the intake? ive not done anything like this and my egr is stuck in and broken and vans due its MOT soon.

[@2rmmotorsport]

removing the intake manifold is a pain in the a••. If your EGR is stuck you can remove the intercooler pipe on the right hand side of the intake and use a pry bar to push the EGR out

[@xchiefxx]

@@2rmmotorsport thanks I'll give that ago.

[@ben-wq2lj]

Bonjour ! Cela fonctionne sur Renault Kangoo DCI ? Merci je pense que je vais essayer

[@2rmmotorsport]

yes!

[@mavericmorph5358]

Any news when these will be available?

[@2rmmotorsport]

dunno, nothing to do with me.

[@etnica678]

MAP sensor will detect that something is happening and ECU will throw engine failure light

[@kevinwilding7825]

Well it hasn't done so with mine, plus it's cured the lumpy tickover it occasionally had.

[@magdalenamcgrew9994]

What can do to fix it?

[@DerekDoran]

Does it need mapped out after this is installed ?

[@antoniosever5535]

No if stay egr connect in conector.. if you wants completely out all you need doit remap ecu...egr off ,not problem for doit very simple

[@paulsaunders3700]

What difference does blanking off the ear valve make ?

[@2rmmotorsport]

Stops the both the valve and intake manifold gunking up amongst other benefits. Loads of improvements in performance too.

[@EcabreraEnni]

Tengo un problema me marca los precalentadores, y pierde fuerza o potencia, Le limpian la valvula y funciona bien pero vuelve a las mismas. Me dicen que es el multiple de admisión, el escaneo detecta precalentadores, y entrada de aire. Me podrás ayudar con tu comentarios?

[@ranat5526]

@@2rmmotorsport If you use oven cleaner you will never need to to remove the egr.

[@themagpie_1]

just remove and clean once a yr. it is there for a resaon..

[@mavericmorph5358]

eBay are no longer selling this blanking plate.

[@thejakeanade1601]

Damn was planning on doing it anywhere else they sell em?

[@mavericmorph5358]

@@thejakeanade1601 Apparently the supplier is getting more in stock soon.. phew

[@thejakeanade1601]

@@mavericmorph5358 good to know will it be back On ebay mate

[@RonSutherland-n3x]

6 mm bolts

[@2rmmotorsport]

Yes, my mistake, M6x1 with a 10mm head

[@richardbarratt5800]

Best way is not bother doing it at all. Its there to save the environment by reducing the engine temp so no harmful emissions are pumped out the back.

[@lazyboymusic]

Arse ole

[@Robs.channel]

It just collects and then dumps everything at once.

[@jamesbarratt593]

Wake up pal. No it does not just collect and dump. With exhaust fumes reburnt in engine it stops engine temp reaching too high and then polluting environment. Plonker

[@hitmen2025]

Opel corsa c 1.7 dti should i delete the egr well it be ok?

[@steelzmb4262]

3 mpg more deleted it properly. Easy

[@Trollet456]

Greta Thunberg ?

[@samitouru3138]

Thanks. That was good information!