Great video. The only one I found to have the correct location of the egr valve for the 07 4.7 magnum model. This was a great help. Thanks 👍
@daddyrabbit8353 жыл бұрын
Your footage is very good and a huge help. Thank you for sharing this.
@kerryhorton4772 Жыл бұрын
Your video has better vision than your eyes are going to see! We did ours today on an 07. We used a 2x4 from the firewall to radiator support to lay on, my left arm is ripped up coming across the throttle body, use your forehead to lean on firewall. The vacuum line you mention is for the PCV valve, we changed that too since we were there. We had a deep 6 point 35mm that was a tad loose but worked fine,. then that line came off the back of manifold putting things back together LoL .. Nice vid thanks!
@charleszeberlein95472 жыл бұрын
As I was watching this video... I actually got physically ill... I can't believe these engineers would knowingly design stuff like this when they known how hard it is to maintain..or change out the parts... I'm old and sore....can't see....and,like you... can't get my arms and hands back to the part....I've gotta $$pay$$. Thank you for the information...and takein the time to video the swap.
@brandonchavez16073 жыл бұрын
Thanks for the vid man, I have a 2007 and all the other videos were saying it was next to the alternator and I couldn’t find it at all
@suasponte6664 жыл бұрын
Thank you, i am facing having to replace my X's on her 2006 commander 4.7, the 5/16 tube flange bolts are a nightmare, i looked to see if i could negotiate they from underneath, but in the commander it doesnt look good, again, thank you so much, great vid brother, Dale.
@nolanberry65632 ай бұрын
Thank you very much. I've been looking for a video for this for a min.
@michaelvitiello99608 ай бұрын
Good stuff, thanks for the video. Im looking forward to this at all.
@marcsmith38816 жыл бұрын
I have one to replace on a Durango with the 4.7. I remove the wiper motor assembly and tray so I have much easier access. I am not thrilled about it. I am installing an OEM part. I have heard of many aftermarket valves failing after a year or less. Also make sure your engine is running well or the carbon build up will be fast and you are doing it again early.
@elboriqua226 жыл бұрын
Thanks Alvarez, now to replace mine. What a pain is going to be.
@arnoldojeda78832 жыл бұрын
Thanks man was help but it's still sputtering at 1k rpm. Did my iacv tbps and cleaned the throttle body
@dallasmurr72677 жыл бұрын
Thanks for the video. I did this yesterday. It was pretty simple to get out, hard part was putting new one back on. Had to get an extra set of hands from underneath to line up the bolts.
@druknmnky3 жыл бұрын
The eash way to vet ojt is yo get a flexable extension from home depot attach the socket to it and pull it out with a drill took me 20 mins.
@garyhedger1503 Жыл бұрын
Thank you
@kody5306 жыл бұрын
i just did 1 today, it was tough to get to.
@doose9114 жыл бұрын
I'm about to do this job on a 06 Dodge Durango 4.7. no room to get to this thing! What a pain in the ass it's going to be. I though my 06 e60 was a notch to work on. No! This truck is more of a pain 😖 trust me!
@frankieguevara98075 жыл бұрын
Man i did my 4.7l ram and boy i tell you what i did it.but my hands and knuckles needed some first aid attention.
@santanarodriguez32253 жыл бұрын
I just got done taking mine of and boy god damn it lmao 🤣🤣
@mattbrand30316 жыл бұрын
not an easy job. but i will make a video of this when opportunity to change one arises
@nathanbustos69617 жыл бұрын
Does anyone have a video for replacing an EGR valve for a 2012 dodge ram 1500 4.7L
@jacobhardwick80883 жыл бұрын
Any updates on the 2012? Thats what i got
@dinkbuster13 ай бұрын
What problems were you having with the EGR valve to begin with?
@337Brian Жыл бұрын
I have a 2005 Ram 1500 4.7 Imma do an egr delete I have to find a mechanic shop to perform egr delete on my pcm ..
@ricvill93 жыл бұрын
Don’t you drive to get rid of check engine light?
@scottsmith8934 Жыл бұрын
i just replaced the entire engine instead of just the egr..
@CarlosOrtiz-pq8yp3 ай бұрын
What where your symptoms
@megelp15 жыл бұрын
I have a 2006 Dodge Ram with a Hemi and my engine light came on with a code of p0406 I fixed the problem by just doing one thing I replace my gas cap and erase the code...... never came back.........
@chaselesser31918 жыл бұрын
The codes should have been reset if you had the battery disconnected for 2+ hours. I also heard that the PCM needs to be re flashed after EGR valve is replaced. So my question is, Did you have to get the PCM re-flashed after changing the EGR valve, or did the truck run fine afterwards.
@byronrace7 жыл бұрын
No reflash necessary; that's a load of crap. Replace it, drive it. The light will go away within a few days, if not immediately.
@chaselesser31917 жыл бұрын
Yes. This. No need to reflash. Person that said that, probably didnt know what reflash meant. I'd still disconnect the battery, So you don't have to wait a few days to see if the problem was fixed or not.
@dewayneallen12403 жыл бұрын
Thanks I've gotta replace mine I just don't want to do it.
@mattbrand30316 жыл бұрын
should have taken the throttle body off.also possible coil,fuel rail, injectors, and intake if you have to do it with no one to help.
@shaun9156 Жыл бұрын
why not just delete it and cap the ports then get a quick flash to disable the codes from popping up?
@erg0centric2 жыл бұрын
Recall and ten year warranty on the 4.7 ram egr valve.
@kerryhorton4772 Жыл бұрын
EGR had a recall? what years was it for? my vin (07) only has air bag recalls.
@mayken6661 Жыл бұрын
Ya. Working on 4.7 durango, not 10 or 13mm , damn T40 ! BS
@daddyrabbit8354 жыл бұрын
Another case of a mechanic screwing an engineer's wife.
@georgeslandscaping59765 ай бұрын
Yeah right doesn't help it all not even show when you replace the part bolony
@jaimesoto97972 жыл бұрын
A tutorial on ERG valve. 😆 🤣 😂 lol
@williammaloof5415 жыл бұрын
What happens if you have no egr valve
@SpinWave5 жыл бұрын
If you don't have one then you buy one. Go to Rockauto.com. Or if the engine doesn't have it then you don't change it.