EGs MOTOR REVEAL!! - EG Hatch 2.0

[@RobbieFerreira]

For everyone that didnt finish the video but came down here, just know this is an in-between motor while we build a beast on the side, itll be a good set up for this summer👌🏼 I hope your hyped!!

[@elvisssprogis4680]

Yo! You should put a 2jz motor in that civic!😅😀

[@Crazybean9]

Hey Robbie. Would it be possible that i send a shift knob for you to sign and then you send it back

[@Nicholas-oq9hx]

Ls swap

[@Harry_5]

Yep

[@Y_E_E_T]

Shortened Rap songs lol you know how monumental of a job that would be? It also is an in-line which means it’s longer and would be really hard to stuff in there, plus the drivetrain issues.

[@Anonymous-yy9ut]

Unlike other channels Robbie takes the engine out in one video not 5 videos.

[@kevinszakis9774]

That is one of the reasons why I love him

[@lucasjuhas12]

At the same time that he doesn't skip 90% of the build, he doesn't make 5 30 minute videos for something that can be done in 1 or 2 10-20 minutes videos. Also, he actually does all the stuff his cars need, most car youtubers have professional mechanics that do everything for them and they just say what the mechanic did, nothing against them doing it, but it's pretty boring.

[@dillonshort5455]

Amazing about this channel

[@e1e965]

This IS a youtube name, get used to it! But takes 3-4 vids to boost a 240 :(

[@BigBassChasin]

Right. I can’t stand it when youtubers do that. That’s like when you watch a movie and they end it with you knowing there has to be more and so much to explain to make you wait a year for the sequel

[@jimmyshibli6850]

The Civic looks fire without a bumper🔥

[@ddrr003]

Are we playing where is Waldo with car parts now

[@83johnnysaab]

Are we playing captain Honda with our balls?

[@NoLimitHd92]

For the future high HP engine build a crazy K20

[@rubenpagan5733]

No Limit HD you can build a b series way cheaper then a K series

[@ianturner7993]

H2B🤷🏻‍♂️

[@bryce3526]

K24/k20head

[@redhatistaken8015]

H22

[@SIRICKO]

Fuck A k series he has all he need right here.

[@leo-ul1vv]

Let's go Civic 2.0 good luck

[@MrBassBoosted]

My mate has a B18b turbo Honda Domani, it goes hard

[@tautvydasser.8894]

It's so satisfying to get notification about your video.

[@ezram8511]

Lil 1.5Lturbo powered go kart????🤷🏻‍♂️🤷🏻‍♂️🤷🏻‍♂️🤷🏻‍♂️

[@c4nttouchthis892]

That is wayyyyy too much power for a go kart

[@a.j.sgarage9637]

Nah. I'm building a 200hp "go kart" (crosscart) you need to build a much more crazy frame and... basically you build a side by side in the end..

[@robomania6164]

Get a car with a screwed title and make it a skeleton car with roll cage

[@darkhorseautocraft6265]

@Robbie Ferreira That distributor that you got is an obd2 distributor, if your are using the wiring harness out of the eg you will need an obd1 distributor (94-95 tegra) or a conversion harness for it.

[@shanedorian282]

An ongoing progress is much satisfying than straight building an engine to its maximum potential. You get bored fast. Nice job robbie! Definitely will see this car done with high hp down the road. Slowly but surely!

[@jasonfarquhar5932]

All it took was for you to drive a "janky" Honda, and now your inlove 👍. Prescription for miles of smiles my friend. It begins!

[@AveB75]

You should get a supercharger kit for a future car, I’ve never seen a video on it done before

[@toxictophat711]

Mighty car mods did one made it seem really complex

[@toxictophat711]

They need a off road built and supercharge it

[@wargames43]

@@toxictophat711 you can get some cool pro chargers that are basically a turbo size but works via a pully on a mount on the drive belt instead of a top house cover. Would love to see a build one a super charger like that as i also want to boost my little 4 puncher

[@georgezoitakis]

The e.g. Is your best car 🚗

[@wsgedmqnd]

george zoit the brz is better

[@SnugLHqs]

I picked up a decent b20z2 for 300$ yesterday. I’ve never built a motor but from what I read Frankenstein motors can make ok numbers

[@tutorialnation8937]

SnugLHqs put a b16 head on it

[@aeiracing]

You can put a girdle in any b series block. So if you wanted to fully build this one you still could. Just get the girdle and put it in this block. You can go aftermarket or even use the oem one but if you use a oem gsr girdle you have to modify it so i would just go aftermarket.

[@gibbgarage]

I'm watching this whilel taking apart my engine to get me motivated. Thanks Robbie and stay committed!

[@satosanchez2]

Axles, shift linkage too from a Integra should work. Your stock harness should work fine on the b18 as long as it’s OBD1. So it should be plug and play. Good luck

[@miggyy]

B18b1 or as people call an “LS” holds boost very well, combined with the LS transmission is great. if you plan on boosting anything and want it to hold the LS is a great platform.

[@isjesse1]

its nice to see people not just throw money at a civic but actually taking the time to make it your build

[@JWheelie]

Your videos are so exciting, I know exactly what you mean about overlooking Honda's. I did the same and now I'm realizing how insane they can be when looking into my build!!

[@destin6041]

Can also just throw rods and pistons in this and the sleeves should hold like 450-500

[@rubenpagan5733]

Destin Ginnis 550 allll day

[@Brock_Landers]

Yeah, believe that and I'll tell you another...

[@rubenpagan5733]

Boosted B Series EK I mean my my buddy is making that power for 2 years now zero issues

[@Brock_Landers]

@@rubenpagan5733 That's crazy...

[@Brock_Landers]

@@rubenpagan5733 I'm not saying that you're lying, but I find it a little crazy that it's holding that much on stock sleeves.

[@danielgarcia8011]

LS Vtecs are super fun and pretty simple! Plus a well built LS Vtec is gonna make more than a GSR. I only did a stock LS Vtec (Stock b18b1 block, ARP head studs, B16a p3 head, Hondata s300 ECU) and it pulls clean and hard. Simple fun build that gets a good bang for your buck.

[@frostshock13]

Glad to see you are going studs and gasket. I think you will really like that set up, vtec is nice, but it's good entry level swap that shouldn't let you down while you build a full engine.

[@jonathanflores3417]

Go k20/k24 in the future if you want some high power

[@k4spermlbb]

Also my thoughts

[@Matthew-ej3pg]

Hasport motor mounts!!! I have them on my car and they’re great. I swapped my car from a d16y8 to a b18c1

[@patrickpaul4901]

Should swap to a p8r head. Keeps it simple but with bigger valves and a better flowing head. Use the b18b1 intake cam for higher rpm range power band in the p8r head.

[@thomasconnelly2706]

Should totally do a clean install and hide reservoir bottles and batteries etc so it just looks like engine and turbo

[@arieshoward9024]

This is all really exciting

[@Sneakerkiid99]

Also Robbie the valve cover port you said is broken needs to be clogged shut if you use that valve cover, that is a b20b4 valve cover on a b18b head (they're different) and that valve cover won't even fit a VTEC head if you're swapping it

[@SeanxSkillZ]

robbie you gotta upload the basemap of the b18b1 to your hondata ecu because it will still think its your D15 when you go to start

[@deanmclean5447]

Man! I respect the process here! I would do the exact same thing honestly! I’m super excited to see this come together!

[@running.yetiii]

Hey robbie. If the d15b was originally in the civic, you own an eg4 (motorcode) ... if you look for bits and pieces that are missing with the parts you have, check out the eg6 ... that model came with a b16 engine and all engine mounts and etc should fit like lego on any other b-engines. Doing the same thing to an ek civic, so kinda did the homework. Peace

[@firewarrior2427]

Love your videos and that the civic is still getting love

[@thejonnyman1222]

I've never clicked on a video so fast before. So hype for this!!

[@kevinszakis9774]

Same m8

[@killerclone1]

I did a full gsr dual piston brake setup on my eg and I can not recommend it enough and it’s super easy to do

[@eddiegutierrez5731]

You should go b20v and slap that turbo on.

[@stormdrainstormdrain]

That's what I thought he was gonna do

[@barron1122]

It’s a good first swap, my first swap was a b18b1 in a 97 ek hatch! Tough as nails, couldn’t kill the thing

[@rreddragon]

Nice transmission bro!!! Was watching boostedbois recently and Kyle was saying that one of the main advice that Brent gives him is to start a build with a good transmission and work from there :) so good choice!!

[@marcmcmenamin2176]

Please make the new motor as clean as possible by painting it and using the cool silver hoses( sorry I don’t know the actual name but the one yous used on the 240). Also love your videos 😝👌

[@rubencovaciu1910]

Braided?

[@thijnspeksnijder1294]

So stoked about this build

[@JoshuaReidBackpacking]

Stoked! Thanks for the great entertainment!

[@pkguncannon]

Mans started getting into Hondas after all the rice Emerson fed him 😂 jk

[@jaredbanderas1397]

Building another one on the side sickkkkkk

[@RomboutVersluijs]

That valve cover on the old engine was just nice, the blue was looking sexy af! Really hope you'll do something similar

[@Jesse.00]

Finally, wanna see what he's putting in the civ

[@boosted_john]

I also have a B18B1 swapped EG hatch! I just made a video series with Gingium where we boosted it. Just waiting to get a stage 3 clutch before we hit the dyno and make MO POWA BABY! I'm excited to see another KZbinr with a similar setup :)

[@Reda01Reda]

Can’t wait to watch the video where you install it

[@jimhiscott2918]

Not sure who told you Ls transmission are best for boost? They are geared tall and they tend to drop you out of boostva lot do to the tall gears. Strongest transmission for boost would be the GSR Transmission, best trans to stay up on boost would be the b16 transmission do to its very short gearing

[@tommieslayz]

New subscriber I have a 1992 Honda eg vx and I’m building a b181b for the head all you need is to get Brian cower valves and springs and cams. Then your set. Bottom end isn’t s big deal

[@kevinthevega6425]

Love you Robbie keep up the good work haven’t seen the video yet but it’s a banger already

[@joshweaver3024]

Oh yeah here we go!!!😊😉😉

[@zvonimirjelcic1711]

Everyone is call Hondas shit but I started following you when you bought civic and from then I wait for your videos all day. Can't believe we are same age and you are already living the dream. Here in Balkan and probably everywhere people hate Alfa, but I drive it, so screw them, they don't know what they are missing

[@PerryChild4122]

I’m honestly stoked about this

[@vincenttreloggen9772]

Get u a b18c1 get u a b16a head and get the block css setup with CP pistons and eagle rods and a GTX35R btw 300-400 u start having traction issues on street tiers 500 u need slicks or et streets I have a 600hp Civic and a stock b18b1 is safe till 300hp then the ringlands like to crack

[@NARFALICIOUS]

i like the whiteboards. Great idea

[@timodejong2905]

It’s nice to see the hondata build coming together. Keep up the good work💪🏽

[@wargames43]

Try to paint the whole engine in a nice heat resistant bronze paint or something :D When you op open the hood its like BOOM fully repainted engine bay with a nice paint on the engine itself

[@318ish]

B18b1 foe now and k24 bottom end and k20 head for some serious power. And reliability

[@charlatankidgaming5230]

I knew it was a b18 by the valve cover think you guys for going b18 i said its the best boosting engine back when u first mentioned it when getting tegy rear breaks

[@rushilkisoon]

Will you upgrade the interior, like install electric windows etc?

[@fabiank.1685]

Aaaaaaaaaaah i never klicked on a video so fast sooo excited😍😍

[@patrickjaquemet9732]

Much hype!! Can't wait to see this car in the future

[@Matthew-ej3pg]

I have a gsr and I want to boost it and make about 400hp which everyone says is easy to do but personally I don’t much about building motors but I can’t wait to see what you do! I don’t have the luxury to build another motor on the side unfortunately but I’ll follow as good as I can

[@cameronbulosan9620]

can't wait for all the civic videos coming up👌🏾

[@nicknewyen]

You should either run the osias motor mounts or do a video on filling your stock motor mounts for cheap. And pick up a set of fuel injectors from Huntertuned.

[@hondagarage9331]

I swapped b18b1 in my 98ek about a year ago and I love it

[@brokeboysracing9070]

Good choice of a decent motor for what you wanna do. But you might run into one big issue. Is that motor obd1 or obd2 and is your car obd1 or obd2?

[@dcerioclt9942]

All this planning about getting a 2nd engine and such and building the first one a little but then building the 2nd one fully yet he’s on eBay coils. I know their a bang for your buck but you said your doing the civic “right”, there are plenty of budget Coilovers like truhart or tein or function and form or Megan racing. BUT this is just my opinion and I’m obviously not the one to tell you what to do. I am still excited about build🔥

[@Wiztian]

Love the idea. Looking foward to it... #StayCommited

[@rubyvector2023]

Once you decide to start building the crazy hp engine I would recomend a k24/k20 combo, awesome power from those things.

[@camliddle804]

I have a B18b setup that makes 500whp. They are very capable motors

[@camliddle804]

I’m running a GSR trans with a LS 5th for the nicer freeway driving and carbon synchros all around

[@bradanderson7716]

Unless ur doing more supporting mods it won’t be capable of 3-350 whp stock my friends only made like 270 hp at 12psi maybe adding the vtec head would help but not with ur current setup

[@silosis]

270 is pretty solid for what is is tbh

[@hydrolics5449]

SO Hyped for the B18 Swap! Keep up the awesome content Robbie

[@tp9416]

omg been in such a mood till this video came out lotta loveeeeeee

[@isaacprovan1965]

Robbie, this is kinda funny, me and you are pretty much going to have the same car. 93 EG SI with an LS/Vtec swap. I have a full turbo kit ready to bolt on but want to see how the car is all motor for a few months. I’ve had the car for 3 years and have learned a lot. I’ve done a whole gsr leather interior swap with the integra dashboard and type r cluster. Swapped the motor from d series to b series. To finish it off I painted the whole car with a two tone paint job, viper blue off of a 07 Dodge Viper and black. I live in Toronto Ontario, would love to meet you in person and talk about Honda if you want to know anything!

[@guthannight]

Robbie out here building b series and I'm building a d15 with z6 head, arp head studs, forged everything then boosting it lol

[@e1e965]

Was gonna do a b18b1 swap on my hatch but decided to build the z6

[@pyro1977]

When you think about it it sort of went cheap to sorta pricey then full crazy build I think that's a good plan

[@replacement4displacementr492]

Robbie ur gonna need a integra T bracket and also a b series shift linkage. Also when u get ur new integra Axles you going to need a half shaft

[@dendretjelta3895]

What time you going to buy a shop or a bigger garage?

[@blanco_z3455]

D15 is going into a GO-kart calling it

[@anthonymazzetta2841]

Keep the doing the civic vids they are so sickkk

[@r50h9asian]

B16a2 would be a sick build

[@StrikingHunter]

When I seen you guys were boosting the old d15 I had this feeling you were gonna drop a b18 of some kind in it

[@Arkken27]

for the third upgrade should be a subaru or some other four wheel drive motor, so the civic is 4x4 and has like 700+hp

[@c52ned]

Your being real generous with thoes Numbers

[@marvelousyang]

Keep it up fam, love the videos. Stay committed

[@TheKidezo]

Robbie, the LS engine can hold some power down. I’ve built more than enough Hondas to know them like the back of my hand 😭 if you need any help, please please don’t hesitate to ask. LS motors are my favorite lol I’ve personally seen them pushing over 400 hp on stock internals.

[@lurch10101]

awesome... go Robbie GO!....

[@SammFigueroa]

i know NOTHING about cars but Robbie makes me want to do SO MUCH with my subbie😂😂

[@Refined_tm]

Love this build.

[@thanhbeach814]

Remember that if you paint the valve cover, paint it white first to get an even color

[@cattran3960]

ALL MOTOR!!!!!!!!

[@errowjezzy]

Love watching you guys man!! Just a little note you might wanna spend the money and get pistons & rods the stock pistons are known for blowing ring lands with boost keep it up though guys!! I'm from Timmins Ontario nice watching someone who's from closer to me

[@libitoayala1497]

I Respect it man definitely looking forward to this build 👌💪

[@symbik6189]

Love the longer vids

[@grantrichards7051]

You should be able to use the same manifold as the d15

[@slappythesquirrel]

U should build the d series people make high hp out of them

[@stormdrainstormdrain]

Nah, it makes more sense to build a B series or a K series.

[@deanalderson9115]

K20 super charged about 600 to 800bhp about 5k all in with upgraded brakes