Sbego Pocket Drone Quadcopter FQ777 Flying Instructions

Instructions to help you get your new pocket drone flying optimally in the least amount of time. This is the first drone I have flown and found it quite difficult getting everything set up just reading the instruction manual, so made this to help first time fliers get up and running faster.

[@welshthorn]

Found this in the back of a draw after about 4 years. so it's time to fly and thanks for a clearly spoken review

[@repsagcloks]

I've had this drone for a few months now and I couldn't figure it out (it is my first drone). And this video kind of showed me how it works. I will try it and I think you made an awesome video on how to use it. Thank you!

[@damienwood590]

Mate, thanks for explaining this so well for other beginners. Much appreciated.

[@MikusAusters]

Thanks a lot mate! You can't imagine how helpful this is. We lost almost a day wondering why the drone suddenly is not flying.

[@ReeceGale]

Thanks so much, thought mine was broken, until the explanation on different propellers

[@GandalfsHashPipe]

Cool stuff

[@zulkarnainsyarif5888]

thank you so much for details to make fly.. this is video I want

[@weerobot]

The 1st Person I've ever seen Calibrate....cool

[@ilikebleach3201]

Before this I was holding the controller upside down for a week, thank you.

[@koniconga]

Great video thanks!!

[@simoncrum9944]

3:37. Up then down to pair the device. My God, that was NOT in the instructions. I was amazed when it came to life for the first time. Thank you.

[@goldenkiller1st636]

Amazing video helped so much 😃

[@alejandroibarrarangel5180]

It was yesterday but with this video now I know how to use it

[@saumtallyarshad]

thank you you're the best you helped me now i know how to fly my mini drone

[@doranunez4364]

I like your video I'm just gonna call my boy my husband

[@rogermelloh469]

I think much better to order here sites.google.com/site/UltimateTinyDrone than Amazon

[@Merky_Gz]

5:15 so you calibrate after you flyed.. ok , well done 😂

[@Timmmmay86]

great vid specially on the blade spins, mine were backwards!!

[@ejamestaylor]

Glad it helped Time :-)

[@christopherlord3441]

Thanks, very useful. One little detail is that the drone has to be switched OFF to charge with USB.

[@apnatech2748]

This drone very nice

[@tzuigi]

Hi! I have one question: how do i keep altitude the same? Even if i have it set at a fixed speed, it will go up and stay up for a couple seconds, and then go down, at ground level. Is there any setting for this? Thank you!

[@WillHennegan]

Thank you so much for demonstrating calibration! The instructions were not very clear.

[@SauliusLove]

thumb up:) looks helpful

[@robertrandall7103]

komukokojedelo Tried every thing. Watched all the how to videos but still not working copter lights up but never blinks. Motors never come on.

[@NixViewpoint]

Bro this was the most helpful video ever

[@adrianae5833]

thanks

[@tubularsensation]

A couple of things, first, it doesn’t matter what position the throttle is in when binding to the quadcopter. Those little buttons on the side are called trim buttons, and you NEVER trim that until you have flight. Why? Because that quad will go all over the place until you get it off the ground, also known as “ground effect” so trimming it in ground effect isn’t correct. This little quad is fast and furious, and you can tame it by using the lower perfromance mode by pushing in on the left stick for one audible beep. Two audible beeps puts it into sport mode, and hang on baby!

[@apexencore4638]

I know you mentioned what the little buttons on the right side of the controller do, but what do the 4 little buttons on the left of the controller do

[@qishaq84]

how do you know where each blade goes? there are numbers a1, b2 . but where do they go?

[@phantom888ag]

the same ones have to be diagonal from each other. That's all

[@seharsadaf4786]

Ulove it

[@MasterA2042]

this video helped me a LOT, but I have one problem. I broke 2 blades and I can't remember which one goes where. any ideas?

[@ejamestaylor]

watch from 5:28 onwards. i explain there how to replace them in the correct sequence.

[@talvindewitt5670]

i thought getting the propeller coding thing was honestley the hardest out of all of them...

[@smartnoobgamer8292]

Adichupooyi guys! 😂😂😂

[@drex2423]

Mine didn't make the beep what should I do

[@maniek282]

Where I can buy blades to this drone?

[@peterschindler4142]

Can u send the link that we can purchase

[@carinhaquemoralogoali4427]

Alguém do Brasil também está assistindo?

[@user-pm2zv9fs5r]

ayyy this an old video but my dad got it for me when i was really little. its kinda broken bc i broke one of the motors by accident

[@terrencebass9234]

can anybody help me with the blade placement? I made a bad move and don't know how to get the right blades in the right spot.

[@ejamestaylor]

watch from 5:28 onwards. i explain how to replace blades in the part of the video.

[@terrencebass9234]

James Taylor I have watched several times. I have blown on it and everything. I see little letters and numbers on the blades. I just can't figure this out. Now it's going extremely right and only the left side is raising up. I don't know what to do.

[@terrencebass9234]

James Taylor I'm making progress James. Calibration is now my issue. I'm going to get it

[@rosesarecool9905]

Terrence Bass take them all of and put one on one by one and check them by blowing at it

[@rosesarecool9905]

Off

[@alejandroibarrarangel5180]

I would try making it fly but it didn’t

[@rjdabubba8037]

Mine just flips over backwards

[@marellyhernandez3426]

Mine doesnt fly:/

[@djilly75]

I thought you were going to discuss the flying controls. Not how to change props

[@Misslftr]

Ttthhhhaaannnkkkk yyyoooouuuuu

[@enzorainero8482]

my controller won't tun on

[@andrewblasi4855]

Enzo Rainero same!

[@Merky_Gz]

Enzo Rainero send it back guys... or you rather just throw money in the garbich..? 🤔

[@pedrodelatorre4285]

Anyone know what kind of batteries i need for this?

[@pedrodelatorre4285]

AA

[@Ak3r0n]

there was no USB charger in mine :(. FQ777-124

[@Fimmanuelalexander]

there must have a charger

[@linzimurphy4649]

Tells you anything BUT how to replace the blades. 7mins of my life wasted.

[@ejamestaylor]

Hello Linzi. Just pull the blades off using a small pliers, then watch from 5:28 onwards to see how to replace them in the correct sequence.

[@jamesdobson2251]

Useless review nothing about charging the device

[@apnatech2748]

This drone very nice

[@apnatech2748]

This drone very nice