EKOPEL 2K - ODOURLESS!! Bathtub resurfacing coating. Ideal for bathtub makeover.

[@michaelwells7348]

~~Thats the Best Video that I Watched..... when he pours it with the Cup....

[@noddanothen3857]

Seems like it would be really important to know when and how to free the masking from the drain. This video skipped over that.

[@PawelKostrzewski-w2z]

Could be use at jacuzzi? To clean it we use TENZI -product dedicated to clean bathtub. It will not cause that surface will come off?

[@ceeIoc]

can I roll over caulk on the tub surround tile?

[@badazz82]

Why pour and not spray or roll on

[@sixgunsue8]

how long should it cure for?

[@EKOPEL]

Ekopel 2K in the package can be stored for 1 year. The lifetime of the material on a bathtub is not limited. With regular maintenance the appearance of the coating can be the same for 8 and 10 years. Ekopel will not peel off if a surface of a bathtub is properly prepared before applying Ekopel.

[@juansanchez2093]

I think they were asking how long the curing period is. Or does the heat gun complete the curing process?

[@PARKERBROTHERSPLUMBING]

@@EKOPEL you didnt answer the easy question

[@EKOPEL]

24h

[@JoeTakagi00]

​@@EKOPELthe chemicals expire? I have one I bought a few years ago

[@chazmithnewton9989]

Hi if we have some kind of paint or glaze on tub already do we sand this first or deep clean first?

[@EKOPEL]

There is no need to remove all old paint if it is not peeling off. you need to remove the parts that are peeling off, sand the top coat of old paint and smooth out the spots where the old paint has been removed.

[@ggv69340]

How much paint for a bathtub tub

[@JoeTakagi00]

If it is peeling off, does it need to be removed ?​@@EKOPEL

[@chazmithnewton9989]

Can you use baking soda to clean the tub without damaging this resurfacing?

[@EKOPEL]

We do not recommend the use of abrasive cleaning agents. Use cleaning sprays.

[@avijitjha1614]

Hi. My plumber accidentally used thinner on one corner of bathtub. It has lost ots shine. No scratches. Will Ekopel work to restore the shine?

[@nebur85]

Try using vehicle polish to try and get the shine back

[@smartswitchcontrol0134]

How much epoxy is needed for one tub measuring 170cm x 55cm and 50cm deep?

[@EKOPEL]

Set for bathtub. 3,4 kg

[@avijitjha1614]

Hi, can hair dryer be used instead of heat gun?

[@KeepNitReeel]

A hair dryer doesn't get nearly as hot

[@tuyetdo2228]

How long does this product will last?

[@EKOPEL]

The lifetime of the material on a bathtub is not limited. With regular maintenance the appearance of the coating can be the same for 8 and even 10 years. Ekopel will not peel off if a surface of a bathtub is properly prepared before applying Ekopel.

[@DG-fe4ht]

Who cut those tiny bottom tiles like that ? Omg

[@EKOPEL]

The tiles were protected with a protective film. The film was removed 5 hours after the material was applied.

[@DG-fe4ht]

@@EKOPEL I’m talking about the tile installation.. those tiny bottom pieces are horrible.

[@EKOPEL]

@@DG-fe4ht Oh, yes. You're right

[@DoddDeirdre-e4u]

Bashirian Ports

[@ecotts]

When I refurbished my bath, I came to the conclusion that if this guy can paint his with a plastic cup I could just easily open my bathroom door throw a paint bomb in there, shut the door for approximately 12hrs and voilà... Sorted it... Bathroom is f**ked.

[@spreadlove4312]

it is not odorless

[@EKOPEL]

Every object has an odor in the world. EKOPEL 2K does not smell like all other bath paints that are diluted with acetone, xylene, etc. After other bath paints the bathroom needs to be ventilated for a few days. EKOPEL 2K is not diluted with solvents, but is made with pure epoxy resin. It is therefore odorless. The hardener (component B) may give a slight smell of ammonia, but this smell disappears when the two components are mixed.

[@DG-fe4ht]

Buying this asap for my 1948 cast iron tub. The reviews are overwhelmingly positive!!

[@julioquiros1981]

I used before to cover green 60s time works great Can be rolled to but needs a special roller because will take the hair of the roll off great projects I’m about to do 3 more and think I’m buying this again 😊

[@juliannico793]

What type of roller you’re supposed to use with this if I want to roll it?

[@Susan70003]

Foam?​@@julioquiros1981