How to resurface an old bathtub with EKOPEL 2K. Complete guide 2021.

[@dawnmann5256]

After watching this video and the updated one from Refinished Bath Solutions, I feel confident in my ability to tackle this project and can't wait to turn my tan tub into a glossy white stunner! Thank you!

[@beckjuly100]

This is an incredible tutorial. Thank you so much for your expertise, time, and willingness to share it with us. I do feel confident that I can do the job myself now. Best regards and cheers!

[@docdoctme]

Wow! The best Ekopel video- so detailed with instructions. Thanks for sharing.

[@EKOPEL]

thank you!

[@veronique2610]

Amazing video. Thank you for showing step by step and so clearly as to what to do during each step of the way.

[@thediscussionchannel3207]

Beautiful product followed your instruction step by step. Paused the video after each step and did as you did. Bath looks so beautiful now. Loved the music too. Hair drier sorts out the evening out if you have to touch up somewhere that you have accidently leant on. Keep up the good work. From Australia

[@jaimegonzalez6926]

Love the music well done I'm ready to paint my tub thank you so much.

[@Brian-cf8ki]

god bless this handy mans handy hands

[@markchatterton4058]

If you don’t remove all of the old coating, and that becomes unstable and delaminates or start to lift ,then would it not then ruin the job later down the line, removing the old coating is a real job in its self, I know as I have done so many times, when re,surfacing baths, but I don’t like trusting a previous contractors coating. I would love to switch to this method, and eliminate having to strip what can seem to be a stable coating in some circumstances , but would be a nightmare to have to return to a job , and strip this and previous coating back to the original enamel,to start again. Love the great details you are putting into your instructional videos,it’s a great product.

[@komodosp]

Thanks for the tutorial, it really helped me a lot, but could have done with a practice go first! My surface is not the smoothest, however, as in some of the areas where I poured did not flatten out fully and there are some bumps especially on the curved ends of the bath where it would have been flowing down. It took me a few hours to complete the job (ironically because I was trying to smooth out the surface!) Could it have thickened a little during this time and that be the reason? Can I sand these down or will I lose the glossy finish and be left with a scratched surface? I held back some of the stuff without mixing in case any touch-ups were needed - how long can this be stored and how best to store it?

[@tapx1707]

Was it necessary to show the prolonged stirring of the mixture ?

[@EKOPEL]

Stirring should be properly and for at least 10 minutes

[@imanonattorneyspokesperson]

👍ikr...and I'm like "There's no way I'm going to be able to coat the outer edge ( facing me ) before the bottom without coming in contact with that edge".... Not really understanding why you can't just work from the inside out [???]

[@victorslyusarev7709]

Great job brother ,thanks lot

[@rabb1t548]

My paint started peeling off, did I do something wrong? Should I add a primer like STIX next time?

[@EKOPEL]

Hello. Could you please contact us by email. We need to know what happened because usually primer is not needed.

[@komodosp]

It wasn't really flattening on the tops of the walls of my bath so I used a paintbrush - a single stroke along the length - seems to have nicely smoothed it out, but had to sacrifice the brush!

[@brianglover3126]

It appears you did not mix the entire kit to resurface this bathtub? Iam doing the same job just the interior of the tub so how much ekopel should I mix up? What is the ratio of the two part epoxy when not mixing the entire container?

[@EKOPEL]

Mixing ratio 100:17,5 (A:B)

[@ubacow7109]

How hard is ekopel is it like a hard plastic or like a PVC softish plastic?

[@realbrave]

I am preparing to resurface my old, cast iron bathtub. My tub has peeling spots from a previous resurfacing which I was planning to sand down the edges of to smooth so that the new surface can properly adhere to it. I also bought porcelain filler, but I don't think I need it. It looks like that's what's been done in this video, i.e. just sanded down the peeling spots, but in the narration it says to remove the old finish if it's peeling. Can someone tell me if I have to completely remove the entire old finish or if I can just ensure the peeled edges are sanded smooth before cleaning then application.

[@1lilti]

Need to know also !!

[@EKOPEL]

If you can't effortlessly peel off the old paint, you can leave it. But you should try to smooth out the edges of the old paint on the walls and sides of the bathtub as much as possible.

[@rogelioflores241]

Can I find the white material on Amazon?

[@Partywiththebigdog]

Can this be tinted?

[@milenrrz]

Did he just stir that for 23 minutes??

[@Perdz204]

When can you recaulk the tub?

[@EKOPEL]

depending on the temperature in the bathroom.. usually 24-48 hours after the application of EKOPEL

[@CHARITYFIPPS]

What grit sandpaper?

[@EKOPEL]

150

[@rogelioflores241]

What’s the name of the material inside the white bucket

[@rogelioflores241]

Can I find it in Amazon?

[@arinpounov369]

The material at the bottom of the tub ends up being very, very thick. Is that correct? Will it still dry ok? This video also doesn't mention the high (air) temperature the bathroom needs to have like other Ekopel videos do, is this not important anymore? I don't want to cook in the room if I don't have to.

[@EKOPEL]

thick material at the bottom is correct. it will dry ok. the normal bathroom temperature is +22-24ºC

[@brownsugar9942]

This product looks great. Where can I buy this product in the UK, it is no longer available on Amazon UK. Is it still being produced? Thanks

[@EKOPEL]

We will restock at Amazon UK in 2 weeks

[@brownsugar9942]

Excellent. Thank you for your prompt reply.

[@1lilti]

If I have a tub that has been painted before, but is peeling. Do I have to remove the entire previous paint coated or just scrape the loose paint and sand down .

[@EKOPEL]

It is important to scrape off all the paint that comes off. Paint that adheres properly can be left on.

[@benjaminbusibenny6756]

To me, that depends on how much you can trust the work prior to your refinishing. For me, I'd sand it just to prevent the guesswork. It wouldn't take long with a sander. I'd love to make you all a video of how I started and finished.

[@brendawoodhouse8339]

What type of cleaner do you use on the surface in order to keep clean but not damage the resurfacing coating? I don't want to have to repeat this process any time soon.

[@EKOPEL]

You can use any cleaner designed for bathtubs. But after you have poured the cleaner onto the surface, you need to bring it to a lather immediately.

[@cimmeriian]

Are you the EU ArmoGlaze 2k or is ArmoGlze 2k the US Ekopel 2k?

[@EKOPEL]

It's EKOPEL 2K. In the USA or Canada you can find it here refinishedbathsolutions.com

[@dianevessels2632]

Do you have anyone near Fort Smith, Arkansas who can resurface my bathtub?

[@liberty-yr9us]

So… you spend several hours cleaning and prepping tub, but then put tape on surfaces and don’t have to worry about removing the adhesive? Did I miss something here? Will the finish adhere of there is tape residue on the surface?

[@EKOPEL]

At the end of the work we remove the masking tape everywhere

[@imanonattorneyspokesperson]

2 questions... ) My kit came with a roller, Not a spreader...Do I use it in the same manner? ) My kit came with "2K-24" part B epoxy, Not "2K-48" as shown in this vid...Is there a difference between your kit and mines and regardless, Is the application process the same? ...I'm starting to lose confidence in applying this coating...Seems a bit meticulous. I was expecting a more "one-step/apply & dry" aproach but great vid tho👍

[@EKOPEL]

Hi. You got USA version of our product (24 h curing time, application with roller). Please watch this video before pouring kzbin.info/www/bejne/rX7TZWSYo6uLec0

[@stellashaffer864]

Why’d you start pouring it on the front first? Pour it on the back and sides and you don’t have to worry about getting on yourself. Silly goose

[@DG-fe4ht]

That tile job is horrible! Tiny pieces at bottom? Wow.

[@FraidyMan]

Why in heavens name would you cover the outside wall before you did the inside of the tub?

[@galvestonbragg9718]

Informative, but omg why include him stirring among other things for so long!? Rediculous.

[@EKOPEL]

Stirring is most important process

[@earlyriser8998]

nothing about time ...this is like a 2-3 hour process...

[@catswambo9706]

The music is irretating and stressful to listen to. Please stop this adding of crapmusic to DIY videos

[@catswambo9706]

Nope could not finish watching ....... uuuughhhh that muuuuuzzzaaakk

[@anamachado9069]

I was not too fond of the music, so I turned the volume down, watching his work was more important than the music. Excellent video. Thank you.!

[@johndavid8240]

Stay away from this company horrible customer service. The product is just OK you’re better off going with one of their competitors you have been warned.

[@EKOPEL]

Could you tell us which country you are from? We need to understand which distributor you are talking about.

[@chazmithnewton9989]

Do we have to remove all old paint or glaze if it’s not peeling? It looked like the tub was coated with something but it seems thicker then paint.

[@EKOPEL]

There is no need to remove all old paint if it is not peeling off. you need to remove the parts that are peeling off, sand the top coat of old paint and smooth the transition between old paint and bathtub.