Elbow Joints With Locks By Carpenters. Amazing Woodwork

Have you ever seen the process of joining square wood by a professional carpenter with simple tools. The technique this time is a beautiful technique if the three woods used are of different colors or different fibers then it looks beautiful for those who like art. This carpentry technique can be used in photo frames / figures because it will look natural. Without using nails or screws. woodworking joint
If you like this video click SUBSCRIBE

[@philipcarrigan4352]

You are clearly an excellent carpenter, but could you tell me why you use such a narrow chisel ? I'm almost certain that a wider one would make your life easier. Regards, respect and One Love, Phil.

[@randybarnes6661]

It’s educational and relaxing watching you make these joints thanks from TN keep up the good work

[@marcip]

Because of you I am very excited and more creative to find my latest ideas I hope you have a great day

[@Tukangkayu82]

Terimakasih om ilmunnya

[@АндрейБорцов-к9я]

Как у нас говорится, дело мастера боится, спасибо за советы 👍👍👍

[@bloggalot4718]

Ultra strong joint. I might try this one as opposed to a similar joint using dowels.

[@ZygmuntKiliszewski]

Good job, congratulations 👌.

[@nananghary6777]

Ilmunya daging... Gak ada tulangnya sama sekali... Josss.. Mantap.. Trimakasih bro..

[@marcip]

saya akan trus tingkatkan kualitas pekerjaan dikemas dalam video yang mengasikan dan tak membosankan

[@EclaWood]

Sistem yang sangat kuat

[@angelomariano9494]

The rooster said: 'Well done!"

[@ПерстФомы]

Не проще ли выпилить квадратик лобзиком (если уж он так понравился), а то - высверлить кругляшку Фостнером, так и чурочку легче вырезать. И потом, зачем сначала порознь вырезать дыры, а потом склеивать. Точнее и проще сначала склеить, а потом дырявить.

[@hab2719]

Склеить, засверлиться и лобзиком выпилить квадрат. Я сталкивался с такой работой. Только не квадрат, а круглый шкант я делал.И в конце стамеской не возился, отпилил и эксцентриковой шлифмашинкой обработал. Мастер видать фанат стамески))

[@ianjames7280]

How about cutting the square hole a little under size, and then steaming the peg to get a very tight fit, just a thought.

[@TKevinBlanc]

I would like to see your chisel sharpening technique. 👍

[@andrewlawrence990]

Looks beautiful. But if all you need is functionality, a drill and two dowel rods would work as well and be much faster.

[@josemariabravin7692]

Pero se ve mucho más fuerte así la unión

[@ehRalph]

But it’s difficult to cut a round hole with a wood chisel

[@ahmadkodiran7810]

Jozzzz carane

[@manickammk1023]

This is really very strong? And how to make martial arts wooden dummy 's leg

[@klausreviewscraftrestore3152]

nice, a giant dowell.nothing new.

[@docholliday2418]

Sangat menginspirasi,, terima kasih👍👍👍

[@ridwansyahroni6961]

👍👍👍👍👍

[@timbarry5080]

I've never seen glue from a bag before

[@qiqizen2880]

Keren om

[@technewsfortechnoobs]

I still wonder how a joint like this, or any that have a "peg" hole in them would look if epoxy resin was used instead of wood.

[@daveklein2826]

do it and let us know

[@josefranciscorojasluna3757]

muy buena técnica de armado

[@innalemesch6913]

А заробіток де?

[@grundvater]

Klasse Arbeit!

[@marcip]

Möge dein Tag voller Glück sein

[@grundvater]

@@marcip Danke sehr.

[@rfpolak]

great job but it is much easier to drill a 20mm hole after gluing and insert a "brushstick" - Less stress on the edges but also less rigidity . Regards

[@yatisusila7660]

Pahatnya tajam

[@marcip]

cara cari pahat yang tajamcari yang ujungnya memiliki kekuatan magnetnya tinggi

[@IvoryS2012]

Magic 🙂

[@stoliarka-na_kolenke]

Стамесочку надо пошире, а так 👍👏😆

[@marcip]

новый не использовался

[@cupawaw6007]

mas pahat yg gus merek apa?

[@stanislavsorokin5649]

Называть стамеску или долото зубилом?!Куда уж дальше?

[@ParaBellum2024]

Looks nice, and gets KZbin views (and money) which I suppose was the real aim, but the half-lap joint is plenty strong enough without reinforcement. Also, if it _did_ require reinforcement, it would have been a lot simpler to have glued it up, then drilled a few holes through the joint and glued in some dowels.

[@graemesmith4289]

Why do you do everything with a 1/2 " chisel, I dare say you are self taught.

[@thomasschwab2108]

hey there's a new invention out now, called an electric sander!

[@marcip]

Hope it is useful

[@user-yx4wx4oq4g]

If you use a hand plane you dont even need sandpaper. Sanding wood is scratching wood

[@treborgray]

Thomas there is a new invention out now, its called a mirror. Now go look into one and sort yourself out.

[@eddielitter3445]

More complicated than a mortise and tenon joint….

[@heinrichkarter162]

Würde der Horst auf dem riss schneiden wie es sich gehört bräuchte er nicht ständig mit dem Eisen nach fuddeln ....

[@DominikRicker]

Ist keine unübliche Technik bewusst neben dem Riss zu sägen, um sauber nacharbeiten zu können. Kein Grund ihn Horst zu nennen.

[@heinrichkarter162]

@@DominikRicker Mein Lehrmeister hätte mir mit einem Kantholz den Scheitel gezogen bei solch einer Arbeitsweise bei jeder zwischen Prüfung wäre man mit Pauken und Trompeten durchgefallen

[@DominikRicker]

@@heinrichkarter162 Dein Deutschlehrer hätte dir vielleicht auch mal nen Scheitel ziehen sollen. Lass bitte gut sein, hier wurde lediglich eine Verbindung gezeigt und nicht behauptet, dass man der König der Holzbearbeitung ist.

[@billyspears3828]

The author does like to from scratch, kzbin.infoUgkxbnOKZBE4evMO5V2vroHeCjq6d_MV6wJO shaping and trimming wood from large blocks into fine finished products. As another reviewer mentioned, most projects require a lot of high-dollar equipment that most of us don’t have the room or budget for. But, knowing how to do these things, even if we won’t be able to practise the full stack project, is still great.

[@POPYMUTHIASARI]

kalau utk kusen apakah seperti itu juga pak tekhniknya??

[@jimbutler1189]

Seems like you should have glued the boards first and cut one hole. And I think it would look nicer with the square proud.

[@aMakedonin]

Чем это лучше двух нагелей (деревянных стержней)? How is it better than two wooden pegs?

[@-Teslaworld-]

Всеравно непойму к чему такие сложности,это более крепкий вариант?

[@superjaymccool7880]

That chisel work is something to be proud of!

[@superjaymccool7880]

Also that rooster is trying to tell you something

[@murugesan805]

ஆணும் பெண்ணும் இணைந்து வாழ்க்கை நடத்த வேண்டும், என இயற்கையால் உருவாக்கப்பட்டதுதான், அந்த ஆப்பு ( குழந்தைகள் வடிவில்).

[@ThePerpetualStudent]

I would love to see your chisel sharpening technique.

[@trex6142]

At some point carpentry can become art.

[@ijulmahardika8923]

Ketemu juga video dengan teknik sambung yg sama yg selalu saya gunakan

[@dalewysinger3077]

You got my attention with the word “elbow”. This is referred to as a half-lapped joint with a thru mortise in America. Very well executed work, my friend.

[@stephenodell9688]

ya that is what I said, it would be neat if he had made the Mortise a diamond. I love how they change the name of stuff so no one knowa what they are talking about. Do you think some thing was lost in translating?

[@Fromard]

It would be interesting to do a stress test with this style and compare it to a regular lap joint. My guess would be that they would be very similar in strength.

[@daveklein2826]

Hardly, this joint is far stronger

[@jamesoliver6625]

The lock should be only 1/3 the dimension of the half lap distance. It's just a lock, not structural and the joint would be stronger. Nice execution.

[@MuhammadRidwan-jb6nv]

how long does it actually take?

[@mazargo9810]

klo kayk itu..... 🤔 q hanya bisa bilang kerenn jg top.. selalu pokok ny... boss😁👍👍👍👍👍

[@marcip]

trimakasih ikuti saya untuk merancang dan mengaerjakan proyek sampai selesai

[@youtukang]

*SALAM SATU HOBIBKAYU* 👍👍👍👍

[@youtukang]

@@marcip 🤝🤝🤝 blh tau asal mana kawan 🙏😊

[@MrMarekGalinski]

Super film, dzięki za naukę! Czy taki sposób łączenia nada się na wykonanie L pergoli ? Słup 80x200 3m wysoki i 120cm belka pozioma górna?

[@عمرابوعاصم-م8و]

شكراً جزيلاً

[@Pencaritantangan]

Keren

[@totokbudiutomo9789]

Mantab, banyak teori Abang ini ❤️❤️❤️👍🏽👍🏽👍🏽😀😀😀

[@ngelencerjauuhh5497]

*Tampilkan mesin pahaté dong om.. mksh..*

[@SlametRiyadiBocoran]

Ide yang cemerlang

[@marcip]

semoga bermanfaat

[@tungta9076]

Keo trắng đó bán đâu vậy bạn

[@marcip]

Tôi không bán, tôi mua keo dán gỗ FOX ở một cửa hàng xây dựng

[@vdpeer]

Nice. Where in the world are you...Thailand?

[@sulaimanmusic8183]

Pahatnya tajam keren

[@moon000dog]

very cool, what were the woods you used?

[@MrRodigan]

Always good to see a decently sharpened chisel. Do you think it would be better to cut the peg holes 3/4’s through before you cut the half lap joint

[@johnpezano6727]

Namaste hermoso trabajo muchas gracias

[@panstakanski6116]

Не перевод, а просто ......🤦‍♂️

[@maxc1520]

Bagus sekali , salam dari England

[@БорисРа]

Это не зубило, это стамеска

[@DionWoodcraft]

Sangat sederhana tapi.kunciannya sempurna...mantab mas bro 👍 👍 👍 👍

[@youtukang]

Betulllls

[@kristiewisniewski7733]

making plan furniture .

[@ismadiismail8111]

Mantap, pakai lem apa

[@cualuonginh9405]

quá tuyệt vời

[@lucienenogueira8229]

Maguinifico!!!!

[@GNU_Linux_for_good]

*perfect*

[@hengzhucai2821]

销子太大，影响强度。

[@cristianavendano7798]

Felicitaciones!!

[@marcenariahobby7pallet]

Parabéns pelo seu trabalho 🇧🇷👍👏🤝👊🇧🇷💯

[@biz6110]

Why would you make your joint weaker by cutting trough and replacing like 4/5th of the lengthwise grain (the strongest part of the wood) with a poorly fitted endgrain to sidegrain square block? Just the half laps from the sides, IF done with less than ½mm gap and then glued with PVA, is about as strong as the rest of the board. IF you wanted to "peg" the joint then one or two MUCH smaller dowels at an offset from each other would suffice.

[@rivernet62]

I decided this too. But it does have a nice look.