ELECTRICAL SAFE ISOLATION, of a boiler to gas safe technical bulletin 118 and the new ACS criteria

[@samrahman6413]

Awesome video, answered all my questions. Thank you.

[@adamcarter781]

Great vid as always. Be nice to see a part 2 showing the loop test at the boiler using the socket and see loop testing kit. Thanks for all your effort, I recommend your channel to all our apprentices.

[@tomkatgastraining]

I ordered one before I filmed the video but still hasn’t turned up. Thanks for watching and for your comment cheers

[@leeedwards3783]

Thanks Derek. Love your videos and your method of teaching. Very clear and easy to understand. Legend

[@mohammednadeem7274]

Great video Derek on safe isolation, better to safe than sorry. Great bit of information to learn from. 👍👍😁

[@gillsheatingandcoolingltd6032]

Fantastic video , never STOP !!!!

[@pablogarciafernandez1185]

Thanks for your videos, I'm learning a lot👍👍👍

[@mj0n4id36]

Safety comes first! Nice video. I will be watching this one a few times so it’s concrete. I’ve got a non voltage detector which I have made use of quiet a bit on my portfolio. I bought the same one as you 😎. Thanks Derek. Asian Jon. Training.

[@sanjk9116]

Brilliant, thanks for all the effort and clear explanations. Love your tutorials

[@eddiesidebottom2319]

Great info Derek. See you tomorrow Eddie

[@TTM1972]

brillant training video Derek

[@mohammednazir8307]

Brilliant video Derek. 😊

[@paulhayes2351]

Great vid derek, clear and concise 👍

[@dannymatona3506]

Nice one. Very helpful yet again.

[@rayhurrell1722]

Ray Hurrell another informative vid thank you

[@arianxhebraj6107]

Great!!!! thank you for showing the easiest and correct way

[@michaelrose5040]

Great video again Derek. After this pandemic has died down I’ll be taking my ACS so this will be in my exam by then. Thanks Mick

[@tomkatgastraining]

Good luck let me know how you go on 👍🏻

[@saltnvinni1]

Fantastic video again!

[@mohanmanku1903]

Nice one Derek

[@matthewgribbin2187]

Cheers Derek, Matt Gribbin acs assesment.

[@emzdarlington9661]

Amazing video

[@MohammedAli-xh6zs]

Cheers Derek 👍👍👍

[@all4heatinggaslimited40]

So So thank you Derek

[@Bradwellify]

Thomas Bradwell Thanks Derek

[@illuminate06]

Hi Derek, great video. I've got my gas summative exams coming up this month and I wondered if I'd be expected to do a safe to touch test following tb118 on a back boiler as I believe we are meant to do a service on one?

[@tomkatgastraining]

At tomkat we ask our trainees to always carry out the safe to touch but obviously other trainings centres do different things

[@illuminate06]

@@tomkatgastraining thank you for the quick response. Yea I was slightly confused as we have only done it when working of a room sealed boiler but after reading tb118 it states that the test should be performed on every metallic gas appliance (I think, from memory) thanks again for your help 👍

[@Mike_5]

Very informative and thorough but a good idea for added safety would also be to identify the DNO (District Network Operator) type of mains supply at the intake point (TT, TN-S or TN-CS) which in most cases can be done by visual inspection.

[@tomkatgastraining]

A very good point but as gas engineers we are not able to make comments on the electrical installation of the house we just need to make sure we are safe by following gas safe tb 118. Thanks for watching and the comment cheers

[@michaeltran9965]

Great video Michael

[@saidhissoufi277]

Thank you for the video brilliant as always

[@nazirmohammed7285]

Excellence video Mohammed Nazir

[@piotrmarchwacki3414]

Very useful information. Thanks Derek. Trainee at TomKat - Polish Peter👍😀

[@lewismccarthy5511]

Good vid 👌🏼 Lewis McCarthy

[@davidwood1095]

Cheers Derek. David Wood

[@leonardbalint4930]

great Derek, thank you

[@SuperMaxwellhouse]

Thanks Max hewitt, training

[@arkwin3857]

Great Video 👍👍👍

[@Mad4plumbing-ltd]

Nice one, Derrick,! Love your humour but at the same time your serious safe as houses 😉

[@paulwalker7790]

Very informative 👍👍 paul Walker

[@rickabitia]

Cheers, Ricky

[@hafizimran6021]

It’s amazing video

[@monikanader9454]

Great video 👌👍👍

[@rivkiroyde4362]

Thanks Derek Benny

[@chrisself6453]

Chris Self 👍 cheers Derek

[@manjsingh6500]

😊👍 as usual great content

[@gdesltd1]

Hi Derek, love your videos great stuff. Can you clarify in this one where it says these test equipment not suitable. We use Fluke kit so our NCVD are 200-1000v but makes sense to go with more sensitive kit. Even Kane only stock what you recommend. Cheers Steve

[@tomkatgastraining]

The lower you can get one the better because it’s all about detecting voltage to stop a spark happening as well as being safe to touch

[@alunroberts1439]

If the earth and neutral are reversed at the socket the tester still says all is OK, As at the incoming there linked any way. test it take a short extension lead and wire the plug in that way and test again. But if there is a RCD on load it will trip

[@vladimirstafasani4630]

Great video as always Derek can u please do a video on how to use a multimeter👍😊

[@tomkatgastraining]

I have quite a few videos using a multimeter testing boiler parts 👍🏻

[@vladimirstafasani4630]

@@tomkatgastraining fantastic will have a look at them later on👍 Thank you

[@darrenmorris1612]

Watched, Darren Morris - re-assessment

[@zhearahmed]

why do you get continuity between neutral and earth ?

[@Zaine22]

So what if it's connected to a fuse spur as most boiler are

[@chrisjones4500]

👍👍

[@7dayplumbingservices195]

Can you use a self proving voltage tester , i have already one from tool station

[@tomkatgastraining]

How do you know the self proving part is working I would still test it on a known supply 👍🏻

[@7dayplumbingservices195]

Tomkat Gas Training true , that make sense , thanks , great videos 👍🏻

[@fazer2000uk]

Thanks Ben ACS Resit 20th July

[@karl8025]

👍🏼

[@mattbullen6222]

👍 Matt Bullen

[@mervinpermalloo8589]

🙏😊

[@paullittle9133]

Makes the gas engineer sweet,, hehehe, stray voltage on gas pipe, neutral all switched lives,, socket and see equipment is £100 ,,maybe less on eBay,, is 50 volts or 100v safe ?

[@carsonwilliams6319]

✅👍🏻

[@kelvinellis8312]

Hi where did you get that plug in tester?

[@tomkatgastraining]

kelvin ellis Ebay mate

[@thealifamily8090]

Nice video mate . Muz

[@shaundavies2974]

Shaun Davies 👍🏻

[@stuartparrott6078]

watched cheers Stuart Parrott

[@markwilson2415]

Mark Wilson 👍

[@oneloveonelifeman]

Camilo Alcapia 👍

[@jamalamin082]

👌🏽👌🏽🔥

[@M20DAN]

Tomkat👍🏻

[@marvindallen8916]

,👍🏾

[@williamsjordan1979]

Jordan Williams ACS

[@craighurst3599]

CH 👍

[@aaronjoyce1980]

Aaron Joyce trainee 😁👍

[@differentname8051]

Put subtitles on and apparently Derek does something completely different.

[@jon-paulward4580]

Jon-Paul Ward 👍

[@andrewrogers3712]

Andrew Rogers :)

[@dts9770]

Dave Thompson.

[@liamjmurphy]

Liam Murphy ACS re assessment

[@ianferguson4846]

more tests, next will need to train to be accountants to collect money from customers

[@Михаиллеви]

😀 in the real world people just switch off or plug out the boiler to get at the pcb.

[@stevenluty2758]

Steven Luty ACS

[@chrissanders5570]

Chris Sanders

[@hdhanji8006]

The hobnobs who disliked this video probably use their fingers to test isolation 😂 Thanks for showing the correct way Derek, gold as always. Hussain

[@thealifamily8090]

🤣🤣🤣

[@paulhayes2351]

Paul hayes

[@scottkelly5462]

Scott kelly

[@jordansiddall6235]

Jordan

[@matthewburns2870]

Matthew burns

[@davidmarsden8868]

Looked like 12-100v to me

[@steve250276]

steve ward

[@battsonbikes1919]

LOL, Great if there is a socket close to boiler.....

[@tomkatgastraining]

What you laughing at it’s still the same procedure if it’s fed from a fuse spure 🙄

[@huzayfa-ve2vs]

Huzayfa Bham ACS

[@TheBhimaLogan]

Bhima Logan

[@adammartin4823]

Adam Martin DDG

[@asholiver1587]

Ash oplumb

[@mikefahy4960]

Mike Fahy

[@kennylogan5077]

Kenny Logan DDG

[@natugrmaxion8337]

natnael

[@lazylady81]

Where can I get a proving unit for the proving unit? LOL

[@tomkatgastraining]

The proving proving shop

[@lazylady81]

@@tomkatgastraining lol. Cant believe the price of them and you gotta buy 2 lol

[@tomkatgastraining]

@@lazylady81 do you not need a proving unit to prove the proving unit to prove that one 🤔

[@lazylady81]

@@tomkatgastraining I know mate i m just messing about.Its always summat with Gas Safe though. I redid my acs in 2019 so this is actually the first I've heard about this new reg. Ive got all the kit already apart from the proving unit but I managed to get one from eBay same as yours for £60 so it wasn't too bad.

[@Михаиллеви]

Don't need a proving unit. Gas engineers do not kill all the power like electricans so will have a non isolated source to prove on and use a 12 quid kewtech adapter plugged in on any live socket. Don't think that is poss then get a self proving tester for 50 quid on line

[@joaovittoria2533]

👍👍

[@viran8121]

👍🏽

[@davebarlow7542]

👍🏼

[@secondchance4498]

Chris taylor

[@leonwells6270]

Leon Wells ACS

[@timmyshah6450]

Great video 👍👍

[@Scarface_2024]

👍🏼

[@sxphie5440]

👍

[@keithheavens8971]

👍🏻