How DG deep sea controller working | How to do wiring from deep sea controller to DG

[@zenebehagos3537]

you are a real electrical engineer sir Go a head, we will follow u intendedly

[@gopalk1977]

very good training i am waiting for more video

[@electricalmastar]

Thank you Mr. Gopal and keep support us 🙏🙏🙏🙏

[@juanzambrano3733]

​@@electricalmastar Hello, very good videos but will you enable the option of other Spanish or English subtitles?

[@MisrakKulle]

Thanks sir, good explain.

[@yuvaraj2023-i3z]

Really helpful sir and easy to understand. Thank you...

[@prashanthchalluri7550]

Very clearly explained sir, really a great job, and thank you very much

[@TajuAziz]

Thanks a job well done

[@AliceSchoen]

Can this be used on a portable generator?

[@1stoppowertech756]

Sir I Wish to convert cat 250kva control to deepsea. Which model i should choose. Need synchronization also. Pump with atuator. Plz help.

[@shaneefh926]

Great class sir thanks a lot, u can also add a practical video also so it will be more informative

[@jrabot2035]

Hello sir do you know how to install software of smartgen control?

[@mb9932]

does the 6110 have a set of dry contacts that can carry 2amps at 240 volts

[@nilankafernando5493]

thanks my friend

[@avisheshsingh2644]

good day sir i need to knw how can i find the wire to start a generator

[@mohameddeik9556]

Keep it going this usefull video ..appload the next concepts for the deapsea electronics and configration software.

[@electricalmastar]

Thanks for your comments and deep-sea configuration video has posted in our channel please check this link kzbin.info/www/bejne/apepiKpjdtd-mqM Keep support our channel Thank you

[@sandebrian5659]

Great

[@senthilrasu3892]

Sir very nice to explain. We help oil pressure sensor fault comming . How can we by pass please. Thank u

[@manirajumasavarapu1128]

Super explained sir.

[@afifamrulloh6975]

Hi sir, the generator could be auto start or on if the power system off

[@dsadzaglishvili]

Please tell me how U connect fuel shut off solenoid? Can i make parallel connection with primer fuel pump line? EST solenoid not going on

[@zenebehagos3537]

I need your help

[@AbdulkabirMohammed-ou9fm]

Good evening, pls I would like to get that control model shown

[@athullamuthunayaka4572]

Which wire conect reset?

[@mohammedabdulhadi7312]

Can I use the analog input signals for the ddc panel

[@electricalmastar]

Thanks for your comments and yes you can give analog input signal to dse panel Thank you keep support us

[@ГригорГригор-у1й]

Hello. how to turn on the ignition without starting the engine ? DSE 7320

[@rahmatali-zq3jl]

Hello sir sadmack gcu bord repayer hoga

[@dominicthure5943]

Good I really like the explanation, i need to learn more about those, how can it be possible?

[@mbwanaali6278]

Nice engineer

[@yashargarayev4552]

hi. which icon in conroller mean DG running (DG started) ?

[@TanveerKhan-bk7sq]

Hi dear can you share auto start video

[@jjr897]

Do you have to use the SCR magnetic pick it up for the controller to work. Or can It pick up frequency from generator alternator?

[@dlewis4647]

Can you bypass the sensor alarms and still crank engine?

[@tamim.talukder]

please tell me how i am engine start and stop another push button switch.

[@dulcemachel1335]

And with you don't mind you could make a video talking about EMCEP and DSE ...

[@leozivira5503]

Thank you with good video. May I request DSE 4620 wiring diagram please

[@michaelherrera5562]

How can we by pass the low level coolant alarm or disable ? that causes the generator to shut down without using software.

[@AdemMohammed-de8db]

Thanks sir Good Explanation

[@prasadk7884]

This video most help for me ....thanking you sir.....and one more request please provide sedmac GC1211 controller software for me, we r facing lot of problems due to with out software...

[@electricalmastar]

Thanks for your comments Mr. Prasad, let me check that software and let you know Thanks

[@sabastinsabz8813]

Hello can you explain why emergency symbol appear on screen and shutdown the genset when the switch does not engaged

[@yerootole5565]

May you explain me from where we can take and wire for 30 & 31 as well 32 & 33 using contactor and glass relay

[@kevster297]

Hello, how to wire if 3 phase 3 wire no neutral wire?

[@ChetanJadav1990]

Please help me I have dse 6120mk// showing low oil pressure sender fault in the events log , tried to run genset manual it's not working engine lube oil solenoid shutting off the fuel valve genset stopped working??

[@electricalmastar]

Thanks for your comments and low oil pressure means chance for oil level may get low or check coolant level is it okay, and finally check sender unit faultiness. This out of 3 option may be chance for gender stopped Thank you keep support our channel

[@ChetanJadav1990]

@@electricalmastar thanks 😊

[@harrissonramirez9448]

Hi, how are you? I have a dse 6110 mpu 4.1 which only looks green on the display and I can't see the parameters and I would like to be able to adjust that

[@rejisongeorge6144]

How to check RS485 port working

[@chrisivardsouza1623]

Sir can you make a video DSE and ECM wiring

[@moctarndiaye995]

thanks for your sharing. Please is it possible to have a PPT of contrôlers DSE73XX with DSE890 MKII.

[@electricalmastar]

Thanks for your comments and sorry I don't have the ppt for that now. Thank you

[@richieuntaran8530]

Nice video sir, sir the pin no. 30, 31 is n.c this use for contactor of main power and then the 32,33 is n.o for contactor of generator. Thanks sir

[@muruganbhai699]

i clearely understanad

[@bishwajeetpatra1588]

Thanks a lot Sir. It was an extremely informative session. It cleared several of my doubts. I have a doubt regarding Deep Sea controllers. Can it be used for governing the speed of the Engine and adjusting the voltage of the AVR ? Please advice.

[@patrickmuleega]

Dear sir my deep sea controller is lighting can start and stop but shows nothing on the screen

[@varadarajanu]

Sir our deep model 7110 problem generator start after 5 mint's solenoid will come stop position ?what's the reason

[@electricalmastar]

Thanks for your comments, I think it's problem with stop solenoid coil check it Thank you

[@chubaid3557]

which alarm show on deep sea may any safety active any input output active there thats why

[@hassanjaber5159]

please i am seeking for electrical engineer specialist in synchro panel

[@hajiamjadali7170]

How to clear the fault alarm

[@shanmalik7095]

Bhai humare pas generator hai alternatior moro back side se jal gai Hai Jahan 2 wire lagi hoti hai D+ AND B+ Or mein Saudi Arabia Rehta Hun or bohat jagah se motor doondh raha hun kahin nai mili or kia alternatior motor ko 3 wire lagana zaruri hai ground Jahan D+B+ wire lagi ho pls muje batana humara jenrotr just crank start leta Hai 3 bar bad mein wo started to failed aata hai kia ye problem alternatior motor jalne ki Waja se hai ya koi or masla Hao muje batana pls meij kia kron I'll wait ur answers Humara generator 7320 kaii hai pls

[@stevenaua9611]

Deep sea 7510 in AUTO/Manual in runs few seconds it cools down and stops. Why is it doing that?

[@y2ye]

sir would you like to explain to us, where is the pin used for Remote start function please?

[@bluestar6248]

Can I explain DG645 location of hours sensor

[@marlontaroma4590]

Hi electric master. I have 3x125kva jcb generator failed to sync. The current version of the dse8610mkii is V4.1. I do all the same configuration of this 3 units but still failed to sync. Can you give me some tips boss.thanks

[@electricalmastar]

Hi Thanks for your comments and for sync or parallel operation please check this video it could be helpful for you kzbin.info/www/bejne/mqWsqKtor9CciZY Thanks keep support us

[@marlontaroma4590]

@@electricalmastar sure. Appreciate. One last thing do I need to update the firmware from V4.1 to 5.1. since I try so many times.thanks a lot

[@electricalmastar]

Try for the update may be it will work

[@tstechnicalsawant8505]

Thanks sir for explanation i really like, but can you please explain how to connect rs232 and external start and stop

[@electricalmastar]

Thank you for your comments , i will make separate video for RS232 connection and external remote start operation very soon. Kindly support our channel Thank you Electrical Mastar

[@zenebehagos3537]

superb video

[@amkamboj]

Hello Sir Can you explain the wiring of PS0500 Cummins

[@richieokello2162]

Hello thanks can u plz guide on electrical interlock and how 30 to 33 are connected on the magnetic contactors

[@florenciochirruque3324]

Electrical master please help me with the wiring diagrams of HGM6100N-RM REMOTE CONTROL MODULE

[@electricalmastar]

Thanks for your comments let me try for your request Thank you

[@parvejmallick2831]

Sir, i want to know the connection for hours run in this controller

[@milindgacche8925]

Dear Sir, Please give information about Down load the program in controller

[@electricalmastar]

Thanks for your comments dear and dse downloading video as already i posted in our channel you can check here kzbin.info/www/bejne/gXjJoZR7d9urn8U Keep support our channel Thank you 🙏

[@faiyadali8522]

Good morning, very nice explained,I want to also,, explained in Hindi language,, hope you are cooperate with us.

[@yunasseble8570]

I got problem with my module was blank unable to reading anything,, any idea sir?

[@electricalmastar]

Thanks for your comments There is some option called factory reset you can try that one

[@johnwilliamsawatey6365]

How can I reset a forgotten password?

[@ahmedwaleed6886]

Welcome to you and we welcome this good and wonderful channel as wonderful as you are and I hope that you will accept me a new subscriber or a friend of yours and I have a question. And it is ... Does this scheme apply to all models of old and modern dpc screens and the same way of entering and adjusting them manually. How do we get all the old and new dpc programs and are there any One program for it deals with all versions of dpc screens. A thousand thanks and more success, waiting for you to respond with impatience.

[@electricalmastar]

Thank you so much Mr. Ahamed for your kind words, and yes one software is can able to support all type of dse controller but based on model type its having different functions. For that you need to check your des model catalogue . Thank you & keep support our channel

[@goswamishab5263]

Pls conduct a class on calibration of this module

[@SubodhKumar-qj4lq]

Hello sir, excellent explained by you. Sir in 250 kva DG DSE pin number 10,11 and 12 used for health indication. 10 for green light, 11 for yellow and 12 is red. Problem is when switching on exciter supply that time green light must glow but it is not working. At pin 10 need O/P 24V but it is missing. What are may be possible cause ? Pin 10 to indication lamp wiring is fine. DG is working only health warning light not working. DSE is 7320 mkii

[@diselgeneratormohsinhayat4722]

Pls update esm perkins disel series 1300 clustemar conochan pls knolage for all ecm pls 🙏

[@josephaoun1088]

Hello sir, i have 4 generators running it's been a while. Suddenly, one of the generators doesn't syncronize with others and doesn't get on bus. How should i find what's wrong? What should i check? Thank you

[@deepthipathiratne6964]

Please explain how can we parallel CAT 500 Kva EMCP 4.2 controller with deep sea 8610 two sets with main supply

[@electricalmastar]

Thank you for your comments Mr. Deepthi Pathiratne, i will make separate video for DG parallel running with DSE controller Keep support our channel Thank you

[@deepthipathiratne6964]

@@electricalmastar Sorry, In my case it should be CAT EMCP 4.1 with DSE 8610 and 500 kva dual generators

[@Manoj_0341]

Sir for your kind information if you want synch with main utility then you need DSE 8620

[@shaneefh926]

Wht is the difference between this and amf, ats

[@rahulkumarkushwaha1235]

Amf- auto mains failure ( when mains supply will cut off, diesel Generater will be start automatically) ATS ( auto transfer switch) When Genset will start it will give load supplies from mains to DG

[@3umaransara894]

bro how to sketchual it ?

[@fishamenbere2084]

Thank you so mach

[@etiennewandonga1986]

Thanks Anyone knows how to remove the pin on the module?

[@AnasAl-Dhafiri]

Many thanks

[@mwanawahakaemmanuel7232]

Thanks alot

[@ritusubodhsharma417]

Hello Sir I Want To Know MSc Data Failure Dse8610

[@ritusubodhsharma417]

Plz Help Me Msc Data Failure

[@MrNandu32]

Nice..

[@TrisnaWijaya]

hello sir, could you explain what protection we must use when phase angle is different between main bus and DG when syncrone?

[@electricalmastar]

Thank you for your comments Mr. Trisha vijaya, For synchronization of DG and main supply you can use deep sea controller module 8610 which is having all protection for synchronization. For more about synchronization watch this video kzbin.info/www/bejne/mqWsqKtor9CciZY

[@kkmaungwin1]

Hello... For DSE 7320MKII Can you please explain oil pressure input (Type: DC6M-2) & coolant temp; sensor (Type: KAIZHOU) how can I set the input value for the shutdown alarms? Thank you

[@electricalmastar]

Hi thanks for your comments and for oil pressure and coolant temperature set values you can get it from DG manual

[@patrickolofia9127]

Could you elaborate more on the input 18,19 and 20? I have connected to the DSE 7410 through modem, however I could not able to get pass connecting to module. Do I have to run connect input for this before I can be able to connect to module?

[@Narguna_vlogs17]

Hi adeco fault and ECU red mean

[@tchare-abalokaranzi1833]

How to use dse mkii 7320 with a single phase main PLS ?

[@aldwinrichieortiz7634]

Hello sir. Can u pls send me a clear schematic diagram of controller to dg.. Thanks

[@lazy_monster_gamerz]

Does anyone know what is AR and GFR in controller ?

[@sijuem]

Where we connect ATS connection

[@varadarajanu]

Sir deep sea 7110 model connection same ,

[@electricalmastar]

Thanks for your comments, Yes it's same

[@teodoricoromero3648]

Sir can i request the full conection between ats to genset diagram including battery charger... Thank you

[@electricalmastar]

Thanks for your comments sir, and check this Link it may be help you your query kzbin.info/www/bejne/Z2ipqot8jLeHaZY Thank you

[@Skallvideos-hp4ww]

Sir, it would have been nice to explain this video in Hindi language too..

[@عبدالرحمنمحمد-ر4ج8ش]

thank you

[@raufkhan159]

I got a massage on DSE controller (6110MHII AUTO START) Ramp up, Safety on delay & waiting for delay. even though the generator is running and given voltage. could anyone tell me why all these massages showing on display.

[@electricalmastar]

Thanks for your comments and those msg are inbuilt configuration for safety of device

[@mantashanabil6619]

Perking Engine genararator How to Case lockout Alaram

[@electricalmastar]

Hi For lockout alarm and all protection relay system has linked with trip circuit that's why when DG get trip lockout relay also get activated Thank you

[@surafelasefa272]

Cool

[@maithemabbas2275]

❤❤❤

[@m.santhanakrishnan990]

thank u

[@arctonengineering6316]

I want to know config swith

[@electricalmastar]

Hi For switch configuration i have posted another video you can check in the playlist Thanks

[@Manoj_0341]

Explain about analogue inputs,outputs and digital input and output

[@electricalmastar]

Thank you for your comments Mr. Manoj, i will make separate video for input and output configuration Keep support our channel Thank you

[@povphanith963]

HELLO TEACHER

[@electricalmastar]

Hi thanks for your comments and keep support our channel

[@kouamefrancoiskouassi6413]

Chaque carte électronique modèle APM