Get the tools away and “get the hell out of dodge” Great video top work dude!
@johnschlesinger20095 жыл бұрын
Great job (as usual).
@Baggiolyful6 жыл бұрын
Love the smell of fp 😌
@TheFireAlarmChannel4 жыл бұрын
I know it's an old vid now but your not allowed to use plastic clips for fire alarm cable metal only, 300 on the horizontal 400 on the vertical
@LukeWilson20036 жыл бұрын
Great job as always
@lukewheeler25866 жыл бұрын
I can never see the band playing the laid back easy jazz music. Must be just off screen.
@Danny-do2ov6 жыл бұрын
Top Video again mate. Keep up the good work bud.
@jameseverett24336 жыл бұрын
Please make more videos of your installs of fire alarms, great video mate really enjoyed it!
@DanstheEngineer6 жыл бұрын
Thanks for the shout out. Someone told me about your videos. Keep it up. 😎
@LukeWilson20036 жыл бұрын
Dans the Engineer and I wonder who that was....
@Monkey33534 жыл бұрын
great job can you show me how to wire in a panel 👍👍👍
@shanestockton38716 жыл бұрын
Love how you made a tidy jobs of it but a shame the place blocks up one of the fire exits so you can't get out of it made me laugh.
@williamsullivan57334 жыл бұрын
What you call "trunking" we call "wire mold" here in the U.S. also, our plenum wires have a string in them so you don't have to risk knicking the wire. Just strip an inch off the end and pull the string.
@WarrensRandomAndWeirdVideos Жыл бұрын
how stupid are you Americans
@abrahamuk74034 жыл бұрын
Thank you, that's great
@testlogs90056 жыл бұрын
great video mate, i will have to admit i did cringe when you used the sticky back trunking, really not a fan of that stuff.
@nickbuckle6466 жыл бұрын
Like the band strap idea. For round cables try the jokari tools great for fp. Have you tried the concrete screws like wall dogs for mounting your fire Alarm stuff no ralw plug required which I am told is the way to go these days.
@AutoUnder5 жыл бұрын
Don't new call points require stopper covers now?
@clandis58134 жыл бұрын
you need to get a glow rod my guy
@crew46705 жыл бұрын
how much would it be to install all that system just wondering because I need someone to install them in my house.
@Andrew_Tate_Personal5 жыл бұрын
kai gregory call your local fire alarm company. Prick
@crew46705 жыл бұрын
@@@Andrew_Tate_Personal maybe because I don't want to spend a lot of money on a company that charges a lot for an hourly rate
@antonios49263 жыл бұрын
Thanks for the video. So an EOL resistor can be fitted on a manual call point too if that is the last device.
@nonamefornow14653 жыл бұрын
Yes
@antonios49263 жыл бұрын
@@nonamefornow1465 Efharisto Demetri
@nonamefornow14653 жыл бұрын
@@antonios4926 nothing mate
@robcamm75846 жыл бұрын
Hey mate, whats the tool bag you are using, looks pretty sweet, can you review/recommend please
@Cjrelectrical6 жыл бұрын
It’s the Stanley fatmax back pack I’ve done a review if you look back at my older videos .
@robcamm75846 жыл бұрын
The cjrshop thanks, I actually saw it just after I asked, great vids mate, very informative, just qual’d myself and am geared up to go... like your approach, quite inspirational.. thanks
@markdavies72123 жыл бұрын
Why didnt you just come off one of the devices in the same room you was putting the extra devices?
@asef6986 жыл бұрын
Hi mate. Should metal rawlplugs be used when installing fire cable or is it just the fitting which needs to be metal.
@ahkeelahmed94234 жыл бұрын
Use walldawg screws made by dewalt they are fire rated and you dont need any rawlplugs
@Trade9206 жыл бұрын
Great videos enjoy your content, you mentioned about the end of line resistor, can you explain why they are needed in the circuit and are they only used when a radial zone/circuit is installed? any advice on this would be greatly appreciated
@county5825 жыл бұрын
It is to monitor the line in case someone takes a device off or one isn’t connected properly it will show a fault at the panel the panel will always look for a healthy resistance depending on panel type
@antonios49263 жыл бұрын
@@county582 Thanks for that info
@piotr02906 жыл бұрын
Hi. What size of fp200 cable do you use for fire alarms? Cheers 👍
@Danny-do2ov6 жыл бұрын
1.5mm mate
@antonios49265 жыл бұрын
Thanks for the video. What size resistor do we fit at the last device?
@antonios49263 жыл бұрын
@Ronnie Roo Many thanks
@cantbelieveimhere29353 жыл бұрын
Its a Ctec panel, so a capacitor goes EOL on the alarm circuits & a 6k8 resistor goes EOL on the sounder circuit. It looks for 470ohms to trip it into fire.
@antonios49263 жыл бұрын
@@cantbelieveimhere2935 Thanks for the reply
@marjusdedja94083 жыл бұрын
Im a eletrician in albania
@antonios49263 жыл бұрын
eleni foureira very nice
@mrhaydon6 жыл бұрын
When fixing the trunking back, should you also be using metal plugs?
@nathangatenby57446 жыл бұрын
Why would you do that, the trunking would still melt in a fire.
@Cjrelectrical6 жыл бұрын
It’s still a very grey area at the moment manufacturers are taking a while to develop suitable fixings , you can buy screws which you drive straight into concrete or brick which are good , I always strap my cables directly above , so they would never hang over a doorway or exit .
@Cjrelectrical6 жыл бұрын
Raw plugs can melt and the whole lot would be hanging in an emergency exit .
@asef6986 жыл бұрын
Nathan Gatenby the fixing and cable wouldn't be dangling and hanging down causing a hazard. I think it won't be long before all cable has to be tied back with metal rawl plugs along with fixings. One of the main reasons for fighter deaths is through getting tangled in fallen cable. Albeit this is only a small building.
@alexcantley91376 жыл бұрын
ashley sefton plastic rawlplugs are responsible for at least 50 000 fire fighter deaths a year .if you think about it grenfell was the biggest fire the UK has seen how many fire fighters or residents for that matter were killed by dangling cables .it's a case of a problem being invented by governing bodies after a bung has been recieved and solved by manufacturers after paying the bung call me cynical PS I think if your still in a burning building when the rawlplugs have had a chance to melt youve got bigger problems than dangling cables
@tombickerton59096 жыл бұрын
Get a vw caddy
@jamchan64365 жыл бұрын
What brand is the fire panel you installed ?
@LukeWilson20034 жыл бұрын
C-Tec
@Khanjan-si8me6 жыл бұрын
Hi can you tell us the name mini trunk cutter .
@Cjrelectrical6 жыл бұрын
The ones I use are here enjoy www.cnspowertools.co.uk/rothenberger-52000-plastic-pipe-cutter-0-42mm?gclid=EAIaIQobChMI_5Hj7bHl3AIVZZPtCh1akguvEAQYAyABEgLbIfD_BwE
@samanranasinhe1324 жыл бұрын
You're company please fire alarm job Sir your company no wakansis
@FinlaysFireSystemsElectrical3 жыл бұрын
alarm sense is cheap and not very good, its one of apollo's worst ranges if you ask me, your much better off with apollo xp95 or apollo series 65. apollo discorvery is also good but alarmsense is quite frankly shit.