How to Fix or Replace Flash Tube on Nikon, Lumix or Canon DSLR Camera

[@chinihtoh7055]

This is real! I tried it now and it works, thank you for sharing this awesome thoughts.

[@ElectronicsComputers]

I'm glad I could help you!

[@mikaleka]

Thanks for the great video. I would just like a clarification: the gray and orange threadconnect on the lamp; how to recognize the anode and the catodo and what is the correspondence? Thank you!

[@ElectronicsComputers]

The internal part of negative terminal is usually bigger than the positive one. And the trigger terminal is usually located in closer to the negative one. You can use a multimiter to identify the polarity of the wires on a camera or speed light.

[@kosan6969]

Bro from where i can buy this new flash light

[@androidera1858]

Wow.. what an expert... What a video...👌👌👍👍👍

[@ElectronicsComputers]

Thank YOU!

[@EngCrow]

You saved my money. Thanks bro

[@ElectronicsComputers]

Glad I could help

[@randomthingch1970]

I thought this will be complicated but its relatively easy to do because my Nikon D3300 Flash just died Thanks for the tutorial

[@ElectronicsComputers]

Glad it helped!

[@randomthingch1970]

Hey, Update Here!! so I just try to fix my camera, I got my replacement it's from an old Samsung camera(turns out it's too big), I prepared myself but at unsoldering the flash on of the cable just arcing to my pliers and to the flash so I get scared to broke my camera so I just put it back then hoping the camera still works, the camera is still working but it fixes my Flash !! I have never been so happy this year God Thanks For your Video !!! Bless You

[@ElectronicsComputers]

@@randomthingch1970 Maybe there was just bad contact or something. Good job anyway.

[@dishhh5066]

my camera flash works now. but it doest pop up and smells like burning hair just by firing once. it is normal to smell like burning?

[@jamesschlitz3686]

acer harry yes! Completely normal! When your camera begins to set fire, don’t worry.

[@dishhh5066]

thanks :)

[@xxfenrearxx8416]

acer harry lol my camera dropped and flash doesnt workk shitt

[@thenagabucketlist]

Hi, I wanted to know with what donor camera flash bulb did you replace in Nikon DSLR.🙏

[@ElectronicsComputers]

They are all the same. You can use any cheap film camera or simply buy a new lamp. The link in the description they are dirt-cheap.

[@MaximusPanin]

Can you tell me the part number of the Canon EOS 40d lamp ? I can not find.

[@TripleDeano]

How do i bypass the switch on the T7200 popup flash? So it will flash popped up or down.

[@GameKeyModSquad-hr4ln]

hello do you use any doner flash?

[@ElectronicsComputers]

Sure! You can use any flash tube from any camera that you can physically fit inside. Just make sure you don't reverse the anode and cathode terminals.

[@GameKeyModSquad-hr4ln]

@@ElectronicsComputers thank you. i didn't know i flash blub are like capasitor where it need to be certaion voltage and wattage I'll give it a shot !

[@GameKeyModSquad-hr4ln]

@@ElectronicsComputers what does black tube do?

[@ElectronicsComputers]

@@GameKeyModSquad-hr4ln If you look inside the tube, you'll notice that one terminal is bigger and one is smaller. The bigger one is the cathode, or negative terminal. I'm not sure what you mean by "black tube." Old flash tubes become black inside when they are about to die or are already faulty

[@ronniesbabygirl22]

Hello my Nikon l320 flash is not working can u help me fix it

[@TripleDeano]

Is there a way to make the pop up flash active when just released from its seat? Normally, it only flashes when in the fully upright position. The reason is that I wish to have my camera flash inside my underwater housing in order to activate my two remote strobes.

[@ElectronicsComputers]

You need to modify/bypass a close/open state sensor. Usually it's a mechanical one it looks like a button. Depends on the model if you solder its terminals together the flash will work constantly at any angle.

[@TripleDeano]

I have the Nikon D7200. Is this mechanical sensor or button easily accessible? Once the terminals are connected, will it flash even if latched closed/ down? Thank you!

[@PrinceArtanis]

Hi sir thanks for the video. I cannot find the d7200 nikon flash replacement part, could you help me please?

[@ElectronicsComputers]

The link for Nikon in the description below the video. They are almost all the same with the same power and size in all Nikon's DSLR

[@PrinceArtanis]

@@ElectronicsComputers thanks for confirmation

[@hb8527]

good video thanks !! I just tried it, beware of the electric shocks haha

[@ElectronicsComputers]

Good job! It won't kill you but refreshes your mind for sure.

[@nantoce]

Hi! can be a solution for Canon eos70d?

[@sivisoko5798]

yes

[@chiragbandekar7721]

I have a Nikon d3200 the built in flash pops up but the flash doesn't fire up everytime.it suddenly works and automatically stops working.what could be the problem?

[@user-hv7el1sd9h]

Chirag bandekar omg same, but with my canon!

[@user-hv7el1sd9h]

Did you ever fix it ?

[@akshay8395]

@@user-hv7el1sd9h same here :(

[@thenagabucketlist]

Hi I wanted to fix one of my Nikon Camera!!! So are all the flash tube of Nikon camera same or different. Please help

[@ElectronicsComputers]

They are almost all the same. The difference can be only in its dimensions. the links for the tubes in the description.

[@thenagabucketlist]

@@ElectronicsComputers thank you so much...👍

[@jeejay8080]

Bro what is that black colour wire? I ve just try to sleeve it it cuts to small. I have to replace it with normal wire? Please reply

[@ElectronicsComputers]

That black wire is trigger for the flash. Trigger pulse goes to a metal plate around the glass tube. It's fully isolated wire without stripped ends.

[@jeejay8080]

THANKS SIR

[@zeijus3178]

Any advice for nikon n6006? My flash is dead I think

[@ElectronicsComputers]

The links for spare flash tubes in the description. You cal also use any flash tube from a cheap film camera. The most difficult part is to figure out how to disassemble the camera. those tubes have positive and negative terminals, make sure to solder them correctly.

[@zeijus3178]

​@@ElectronicsComputers the links for the spares don't work

[@ElectronicsComputers]

@@zeijus3178 I've just checked them, everything works.

[@zeijus3178]

@@ElectronicsComputers do you know by chance what size flash tube i need for this particular camera?

[@ramzani_r7024]

Sir, I found 3 wire on flashtube canon 600d can you explain ?

[@ElectronicsComputers]

all flash tubes have three wires. Two wires from each side of your tube go to capacitor and the third wire which goes to the side of the tube is high voltage trigger. Sometimes that third wire is soldered to the tube sometimes not. In my case it's the black wire which is attached to to the top of the tube.

[@mikevgpt3504]

I have an old canon t6s that has a non functioning flash. When it’s supposed to fire it just makes this zapping noise from the light tube area. It’s not that old and I’ve never used the flash on it so imo it shouldn’t be broke. It’s my old camera so it’s not a huge deal but I would like to fix it so I can sell it. I will probably take the flash apart soon to see if I can do it.

[@lilandresoriano9892]

Flash buld nikon d3100 fit for nikon d5100 ?

[@ElectronicsComputers]

they are the same!

[@lilandresoriano9892]

Nikon d7000 fit for nikon d5100 ?

[@ElectronicsComputers]

@@lilandresoriano9892 They have different size and power. I have the links for those bulbs in the description.

[@janmicomendoza3670]

I tested the bulb and it works on another nikon body...so what is possibly wrong with ny d5300?

[@ElectronicsComputers]

Do you have a multimeter? Can you measure the voltage on two side terminals?

[@ihsandeeb]

Hello, does it matter what kind of camera I need to have in order to get a light tube for my pop up flash? I have a T5i and the flash bulb popped! So the bulb is completely shattered

[@ElectronicsComputers]

The camera brand or model doesn't matter! The only thing that matters is the size of the flash tube. It should be about the same size +/- 1-2mm.

[@ihsandeeb]

2013Electronics&Computers do you know the size of a canon flash lamp?

[@ElectronicsComputers]

@@ihsandeeb High quality 5-10$ Flash tubes with free delivery: Canon: ali.pub/3eu0lo

[@ElectronicsComputers]

@@ihsandeeb High quality 5-10$ Flash tubes with free delivery: Canon: ali.pub/3eu0lo

[@SouravRoy-si5rj]

Canon 600D Flash busy problem ..please help me

[@NonitzTvVlog]

How to FIX canon BUILT flash check this out. Very helpful 👍❤️ kzbin.info/www/bejne/f3SyqmujhqqKY7c

[@iyaminsaikh8578]

Sir, I have a nikon coolpix L31 camera and there is a flash problem. How can i fix it plz help me. Plz reply...

[@ElectronicsComputers]

If the problem in the tube you can easily replace it. The links in the description. If the problem with electronics then it's unreal job without proper tools and experience.

[@brendanhoffmann8402]

Wow! I really wish I had better soldering skills, I don't think I would attempt this... I ended up buying a hot shoe flash instead (speedlite)

[@ElectronicsComputers]

Also, a pretty good solution.

[@langowski007]

Hello :) Great instructional video! I will start repairing the flash in Leica Af-c1. The camera resets as if the load that should be discharged creates a short circuit in the software. So I will buy, according to what I read in the comments, the appropriate length of the lamp so that it fits and I will try to mount it :) And if I'm wrong, please 🙏 give me some advice. Thank you very much and best regards 👍 😀 Krzysztof

[@ElectronicsComputers]

Make sure that the new lamp has very similar size and the same amount of terminals (2-or 3).

[@MaximusPanin]

How to check the lamp operability by removing it from the camera ?

[@ElectronicsComputers]

It's impossible! It's just a glass pipe with two terminals and some gas inside. No resistance, capacity no nothing

[@rochkimph7199]

Does it work in Nikon d40?

[@ElectronicsComputers]

Basically, it's the same process for almost all DSLR cameras.

[@melodyrocio7741]

Mi camara nikon l820 no me deja sacar fotos con el flash abierto, queda cargando pero no dispara , que podria ser?

[@lilandresoriano9892]

Flash bulb for nikon d7000 fit for nikon d5100 ?

[@ElectronicsComputers]

They are different in size. I have the links for some bulbs in the description.

[@PuspenduLifestyleVlogs]

what about the trigger terminal sir, u have not connected it.

[@1990Ras]

I went out and bought a disposable camera $16 to break apart and get bulb, I was able to get the bulb and successfully make connection, but it was until the end I notice I don't have the extra wire that is wrapped around build to complete connections, I'm not sure what that part is called

[@1990Ras]

I believe its the trigger wire? is it possible for me to add that trigger wire to build to solder it to 3rd wire from camera? or should I look for a bulb that already has the wire

[@ElectronicsComputers]

What camera model/brand are you trying to fix? As you can see in my case there's also no third wire. The trigger wire is simply attached close to the tube and that's enough to make it work. Speedlight tubes have that third terminal. but you can simply wrap the wire (make one coil turn) around the tube.

[@1990Ras]

@@ElectronicsComputers im fixing Canon T3i, I have some spare wire here, ill try use that to wrap around tube, then solder it together to trigger wire coming from camera, hopefully now wire I use to wrap around tube stays in place

[@ElectronicsComputers]

@@1990Ras It should look like this: ibb.co/pdqB4NL

[@1990Ras]

@@ElectronicsComputers you wouldn't happen to have a link where it can be purchase do you?

[@jackkraken3888]

The current is low but that 300v will wake you up real quick.

[@ElectronicsComputers]

Oh yeah, that's for sure :))

[@SuperMommax2]

how big of screwdriver head is that?

[@ElectronicsComputers]

Use any small Philips or flat-head screwdriver

[@nemuasif9349]

Tq.sir❤❤❤

[@ElectronicsComputers]

Welcome

[@PuspenduLifestyleVlogs]

what about the trigger terminal sir

[@ElectronicsComputers]

What about it?

[@PuspenduLifestyleVlogs]

u have not connected it but the flash fires

[@travel2bsmart877]

bro.......just tell me if i need to wrap a wire around for trigger.....

[@ElectronicsComputers]

No, you don't need to do it!

[@brianpolinio2394]

what if the flash is half open?

[@ElectronicsComputers]

Maybe the spring is broken or some stuff like garbage or wires stuck somewhere.

[@Alam_Jamatia_Official]

Flash lamp ....for price??

[@ElectronicsComputers]

The links in the description.

[@raitshots]

good ;)

[@sonumixdigital9299]

Sar Mera bhi camera Mein Aise Hi problem ho gaya

[@sonumixdigital9299]

Display Mein light hi Nahin Aata Hai

[@round2hell-t7u]

Sem prblm sir

[@colbatguano3958]

I would have a lot more faith in you if you used a body cap to keep crap out of the mirror box and sensor. Going raw dog like that just makes you look like a noob.