Simplest Way To Replace A GY6 Scooter CV Belt

Learn the SIMPLEST way to replace a GY6 scooter CV belt. Easily remove, replace, or install a GY6 CV belt when your variator and clutch assemblies are in perfect working order. *ANNOTATIONS MUST BE ON*
Thanks For Watching!
**If you enjoy watching my videos, please show your support by SUBSCRIBING, POSTING LINKS to my videos on other websites & blogs, rating a "THUMBS UP", and watching my video playlists. Doing so helps to ensure that many more videos will be released in the future. (Views are essential to ensure this channel remains in an active state)**

[@electronicsNmore]

It's best to replace the belt using the method shown in this video BEFORE it breaks. If a belt breaks, then you must clean all debris in and around the variator/clutch pulleys. Sometimes the rollers can fall out of position preventing the variator from opening all the way. As time passes, the width of the belt decreases and the belt does not sit as high up in the pulley, which results in a reduced top end speed. These belts can also dry out over time and crack between the cogs. I put 3 -5 thousand miles on my belt. In over 3 1/2yrs, and thousands of miles. The one from the factory is junk, so I immediately replace it with a kevlar belt

[@AlexPerez-ug4cx]

What sz is that belt? I got a 2006 united motors matrix150cc

[@AlexPerez-ug4cx]

I need help asap please

[@Zowby]

The size of belt I got was a 835 × 20 × 30 It seems like it is too wide or the variator wont open up. Can someone help?

[@electronicsNmore]

@@Zowby Sounds like one of the rollers fell out of position. You either need to carefully manipulate one or more back into the correct position, or remove the variator.

[@AlexPerez-uq1it]

What's the size of that belt in the video

[@adambarczi6305]

Sensational video. I changed my belt in 5 minutes after having watched it. Nevermind the critics, this method works!!!

[@electronicsNmore]

Great to hear Adam! Be sure to check out my other GY6 videos as well. Thank you

[@barrybegley5379]

This is, without a doubt THE BEST approach to replacing the CVT drive belt on most scooters. Quick and easy. Thank You for the tip. Greetings from Ontario, Canada.

[@frankmonte437]

You should be paid for the time saving information you give us the public "what a blessing your info has provided"

[@electronicsNmore]

Thanks for the nice comment. Sadly, my channel is way under-compensated compared to many other YT channels that don't even help others, they upload goof-off videos. Thanks for watching!

[@ltr4300]

Thank you so much for posting this. Saved me a lot of hassle with a stranded son's scoot today. Worked just as advertised. It makes perfect sense if you've ever mounted tires. Same principle.

[@SoundlessScream]

I felt the same way!

[@erikpetrie637]

Thanks very much for this video. You saved me $220 and hauling my bike to a repair shop. My old belt was literally torn to shreds. Now that I know the easy way to install a belt, I will definitely be doing this. :)

[@soulvaccination8679]

What type of bike do you have?

[@rickphillips683]

WOW! This should be required viewing for every scooter owner. Thank you friend.

[@electronicsNmore]

Thanks for watching Rick! Be sure to watch my "GY6" video playlist below for other great videos, and most importantly share my channel with many others. kzbin.info/www/bejne/a6fPYqCoibt2h5I

[@357Gunz]

bro u JUST SAVED MY BIKE a CVT dissambebly ✔

[@xiscozapatero1914]

Thank you so much for this invaluable advice, I was able to get my scooter home from a breakdown 30 miles away. And now I know to always carry a spare belt. Regards, Ian.

[@electronicsNmore]

Thanks for watching Ian! Be sure to check out my "GY6 Scooter" video playlist and my other video playlists. Also be sure to share my channel with friends.

[@gusdogbrownlab435]

I was curious, to see if you did anything different....but it's exactly the same way I do it. Works a treat every time. A great help to scooter owners. Very helpful posting

[@electronicsNmore]

Thanks for watching! Be sure to check out my other GY6 scooter videos below and share. kzbin.info/aero/PLQ6IOhUBblU1bkRJ9MagPsKn_Mekq4ws8

[@therdhood]

Just did this two days ago... it worked beautifully. Yes, the new belt going on there (a Gates powerlink) was tight as heck and I had to work it for a few minutes, but it went on. I stuck the old belt under seat. I agree with the video... this works perfectly if other parts on your bike are operating correctly. If I am stuck at the side of the road with a blown belt, I am trying this method FIRST!

[@kamalakami1005]

therdhood what if your belt is still too short to fit around the spraket? Then what?

[@barryervin8536]

Great tip. I did discover this myself a few years ago but only after removing my variator a few times unnecessarily. Note though, that you have to be careful to keep the variator pulley spread open while the belt is off or the weights can fall out of position and then you'll have to remove the variator to assemble it again properly. This may apply only if you are using the "slider' type weights though. (Actually even the round "roller" type weights don't really roll in operation, they slide, which is why they develop flat spots).

[@electronicsNmore]

Yes, you should also carry a small bright flashlight and thin metal probe to place the rollers back into position if needed. Thanks for watching Barry! Be sure to check out my GY6 video playlist below and share. kzbin.info/aero/PLQ6IOhUBblU1bkRJ9MagPsKn_Mekq4ws8

[@ernestosolorzano5116]

I tried it ,and it worked.100% true.

[@electronicsNmore]

Great to hear! Make sure you share my channel with many others and watch my other videos. Thank you Ernesto!

[@albertwolfe6951]

man I was setting in the shed trying to work out how to take off a damage belt a replace a new belt so easy and fast was laughing how easy and fast it was, thank you

[@wesleycook3181]

Great tip. I shredded a belt on the road and had to push scooter home. I’m going to get a replacement and keep under my seat because that long walk pushing scooter sucked

[@DRAGNET-pn5vf]

ME TOO, IT SUCKS PUSHING A SCOOTER A LONG WAY! 🇺🇲✌️👍

[@aaroncherrone5185]

Mannnn

[@calebbacca3421]

Hey me too 😂😂

[@yungmagik]

😂😂😂same

[@jeffmacleod1909]

Sorry, like I was saying, dude you are the man! Your video on how to change the drive belt on my scooter save me so much time and unnecessary time put into taking everything apart!.

[@gselvo]

This worked on my CFMOTO 250cc Honda Reflex clone BUT I used a gear puller to compress the very strong clutch rather than trying to pull it back with my fingers. Three armed 6" gear pullers are $15 at Walmart. You may be able to get by with a really small one. So simple it was unbelievably easy with the gear puller.

[@chrisspavins1011]

My first belt replacement and didn't have a clue, thank you sir.

[@electronicsNmore]

Thanks for watching Chris! Be sure to watch my "GY6" video playlist below, and most importantly share my channel with many others. kzbin.info/www/bejne/a6fPYqCoibt2h5I

[@RichardBullittBush]

I just checked out your GY6 playlist and I have to say that I'm impressed and now, I'm also a subscriber! I've been working on my own scooter, a 2014 TaoTao 50cc, and just learning as I go, and now I'm going to start using your videos to show me how to do more. Thanks for all of the work you do!

[@electronicsNmore]

Richard Bush Thanks for watching Richard! Be sure to share my videos and rate Thumbs Up.

[@bartmyers5892]

This is how I've been changing scooter drive belts for years on many different scooters, except I believed you had to take off that front variatior nut! Use to use a Strap Wrench to hold the variator, and use a long handled ratchet to remove the nut until I got an impact.. this is even easier! Subscribed

[@electronicsNmore]

Thanks for watching Bart! Be sure to watch my "GY6 Scooter" video playlist and share.

[@muzikmanable]

fantastic video mate love to see those people like yourself not messing with to much chat and getting to the point i will gladly subscribe thanks

[@nickicruz3658]

Whaaaaat is this ha.... FANTASTIC well no need of major tool and i don't know to say... very easy and simple...because there is a saying "do it on the hard way or the easy way"..then do it in the easy and simple way as per the video...The very first time i saw this kind of belt removal...thanks a lot and God Bless.

[@electronicsNmore]

Thanks for watching! Be sure to rate thumbs up, watch my other videos, and share my channel with others.

[@dzrotary]

Hello, im new into scooters. I got a freebee and it needs some work. The belt was put in backwards and i attempted to remove the nut with a hammer and a ratchet, although i have an inpact gun. Now im heading downstairs to swap it to the right rotation, thanks a million.👍👍👍

[@Kim-yr2du]

You just saved me about 3 days bro.. Thank you. That bolt is no joke!!

[@GTAIVisbest]

You know what else is no joke? Removing that nut and not being able to or not knowing how to put it back correctly. It requires a pretty hefty torque setting (60 Newton Meters) and anything below that on a 150cc crankshaft will lead the variator to slowly push out until it catastrophically fails at speed. The variator will explode, possibly damaging the crankshaft. Better to leave that nut on AS MUCH AS POSSIBLE! That's why i always remove the clutch to get the belt in and out, and never the cvt unless I HAVE to change rollers

[@daveallen81]

Nice video. Anyone that's ever changed a belt on a snowmobile knows this is the only way to change one. It's damn cold in the snow and farting around with a broken CV belt is the last thing you want to do!

[@electronicsNmore]

Thank you!

[@homermendez6957]

Thank you sir your Genious, very helpfull in Emergency Situation specially here in the philippines, the special tool is expensive for removing of belt. Actually if i do it infront of other Mechanics they will believe me, they thought im a Genius but secretely i copied it from you dude. Hehehe

[@electronicsNmore]

You're welcome! Be sure to watch and share my GY6 video playlists below. Thanks! kzbin.info/www/bejne/a6fPYqCoibt2h5I

[@johnd3523]

One of the best instructional videos i have seen on you tube in 5yrs or so I have dreaded checking my belt, which is sounding as if it may need a change. I will not wait till i break down, now, and have to push it home; (I will fix it on the side of the road) .Knowing my avoidance of doing things the right way. Thanks

[@electronicsNmore]

Thanks John. Be sure to check out all my other videos and rate Thumbs Up.

[@johnd3523]

Got it! will do

[@letsbelogical5537]

Just did this with my Linhai side by side. Works! Thanks so much for making this video!!

[@pmfsify]

With this tecnique we safe a lot of time. Great video sir! Thank you!

[@electronicsNmore]

Thanks for watching Pedro! I have a lot of excellent videos on my channel that cover many different subjects, so be sure to check out my extensive video playlists for other videos of interest to you, rate thumbs up, and share my channel with others.

[@garybaechle1569]

This method only works on scooters that do not have a gear wheel on the left hand side.

[@LOUROLDDAN]

Would this method work on a 2001 Honda Elite S (50cc) ????????????????????? Thanks.. And BTW... I'm a newbie with scooters. But I do know my scoot has about 10k miles and while I don't seem to have any slippage... I think it's overdue for a new belt (and I have a Honda OEM) at hand to do it. Thanks

[@coastalhillbilly3419]

More than more than one way to skin a cat. Gonna do the the full belt replacement and variator service but I’ll carry around the old belt, an 8mm socket and Allen wrench for the kick start bolt. Nicely done 🙏

[@ronniesmith9514]

You made my life a little easier thanks

[@peterstevenson1998]

Great timesaving idea and it works fine as I changed my drive belt on my Kymco motor scooter 150cc. Thanks for the information on the KZbin clip.

[@electronicsNmore]

Peter Stevenson You're welcome. Be sure to share my channel with others and rate Thumbs Up. Thanks!

[@TheJurnalyst]

electronicsNmore thank you man! I haven't done it yet, but I got good insight on what to do with the clutch assembly and tested my strength in my fingers and can do it. Very informative video.... You the real MVP.

[@jamesrahn8339]

That is awesomeness! Thank you!

[@electronicsNmore]

You're welcome! Be sure to check out my "GY6 Scooter" video playlist and share. Thank you

[@MYNICEEV]

Thank you very much for a great tutorial. You could call it Roadside Maintenance. If I was in a situation where I needed to replace a belt on one of those machines. I am glad I watched the video. At the same time I could be driving my car and see someone with this situation and they have a spare. I would know how to do it for them. These sort of tutorials are a great help to everyone. You never know when you might need this valuable information. Once again. Many thanks for sharing.

[@thotbegone1743]

I haven't tried yet as I'm still waiting for my belt to be shipped but this really makes sense and I'll let you know if I'm successful at this. Not really a pro here but I'll try. Thanks to your video, I'll subscribe. Happy new year!

[@electronicsNmore]

As long as you bought the correct size belt, and have a strong grip, it should work fine. Thanks for watching!

[@Msflamingo-wl4qo]

Nice video. Thx! X♡

[@Msflamingo-wl4qo]

Btw: how do I know what size belt I need? I have a 49cc Ice Bear Retro. Thx! X♡

[@RogzielTheAntistar]

There was no top speed interference when my belt turned to ash in my scooter lol. bike just stopped running. in the middle of the road. but i was lucky enough to JUST get off the highway and hit a red light lol. guess my bike is kinda nice after all :)

[@electronicsNmore]

+RogzielTheAntistar Every 500 miles you need to remove the CVT cover and inspect the belt. Always carry an 8mm & 10mm socket/wrench along with a new belt.

[@TheJurnalyst]

RogzielTheAntistar same thing happened to me. Same scenario.

[@tjgrafiks]

yeah i was lucky too. same thing happened to me as i was overtaking someone. it just jerked and no more acceleration, engine kept running, bike started right up but rear wheel didn't move. i was able to just coast of to the side of the road, luckily traffic was light.

[@BedStuyBro]

I got 9000+ km (5.6k miles) on a cheap Taotao 50. It's been 18 months since I bought it, but I felt cheated until I read the comment section. Damn, I was lucky. As hard as I ride?

[@pongothecrownvic474]

Moped belt broke last night had to walk moped home 2hrs52mins. Watching this video so can replace it today.

[@electronicsNmore]

Be sure to clear away any & all broken belt debris before installing the new belt. Make sure the rollers didn't fall out of position.

[@pongothecrownvic474]

@Graham Moore it worked but it ended up stretching the belt and I had to get another one, I learned that have to reset the clutch when replacing belt

[@pongothecrownvic474]

@Graham Moore I give myself credit for trying to fix it, but I decided to pay professional to fix it. It’s a cool moped shop, I stopped there today my moped is dripping gas when I turn it off. A dude pulled up and had 5 speakers amp and bass remote on his moped, we got to chopping it up told me where to get them from and he can install it

[@theshake5378]

I am one of your subscribers for a long time ,, but for some strange reason , I seem to be missing watching this video !!!!

[@kevinstearns4198]

great video

[@electronicsNmore]

+Kevin Stearns Thanks Kevin

[@conwayallday01]

Thanks for this info. my belt broke the other day and I had to wait 5 hours for a ride to pick me up in 95 degree heat

[@MangScoots]

jenuinly still helping me 9 years later

[@1ZebraTime]

Thank you very much for posting this video. I am currently having to change my drive belt that just shredded apart on me while I was on the road. This video is very helpful and insightful. Thanks again

[@electronicsNmore]

This is the easiest way to swap out the belt especially if you are on the road. You just have to remove the foot crank and CV cover bolts. Thanks For Watching!

[@SegaDisneyUniverse]

Thank goodness that I decided to watch this video! My factory belt recently busted on me after 6K miles, and now after watching this, I feel that I may need to have my clutch replaced as well because I have noticed a decrease in speed for a while, despite the big bore upgrade.

[@electronicsNmore]

Be sure to watch my GY6 video playlist below for many other helpful videos! kzbin.info/www/bejne/a6fPYqCoibt2h5I Thank you

[@iking_iicytv]

You my friend are awesome 9 years later and for ever after

[@timmchugh711]

Used this technique on my Yamaha Morphous CP250. Worked great squeezing the clutch together and then installing the belt.

[@electronicsNmore]

+Tim McHugh Great to hear Tim! Thanks For Watching

[@timfark5649]

I use this technique myself in roadside situations. However I feel compelled to caution to remove variation and inspect relavent parts, such as roller weights guides and guide rails as these parts are most likely why your belt broke disentagrated.

[@jamesconner3437]

true...Most belts don't snap clean , because they get worn and raggedy first. That i why its worth inspecting them often. But in most cases. opening the clutch pulley will let old belt pieces fall out and the new belt will get you home. Once home , then it's time to take things apart and "do it right - the hard way "....:)) I would "recommend" this technique for changing belts on a preventive maintenance schedule.

[@jimw7916]

ABSOLUTELY MARVELOUS IDEA ....many thanks to you.

[@billwill7383]

You taught me something today. Thank you

[@fnq-8890]

Brilliantly explained & if you can't change it after this its probably best to walk, cheers mate.

[@electronicsNmore]

It's always nice to have viewers from "Down Under". :-) I have many great videos that cover a wide range of subjects, so be sure to look over my extensive video playlists below for other videos of interest to you and most importantly share my channel with others so I'm able to make more helpful videos well into the future. Thank you! kzbin.infoplaylists

[@fnq-8890]

Cheers Mate I'll check them out.

[@fnq-8890]

Fair dinkum Mate you're not wrong about the variety of your Vids & the multi-meter stuff will come in handy with motorcycle electrics, I think I found myself a gem, cheers cobber thanks very much.

[@dufus7396]

Whenever I see instructions I know its the long way...well done

[@stevenevans5459]

Bro you are awesome great thinking and thank you for showing everyone else what you figured out works thank you so much this helped me so much on the side of the road last week

[@electronicsNmore]

You're welcome Steven! Glad you enjoyed the video. Be sure to check out my GY6 scooter video playlist below and share. kzbin.info/aero/PLQ6IOhUBblU1bkRJ9MagPsKn_Mekq4ws8

[@ImShirazz]

thanks so much you helped me replace my belt on my bike, it was kinda hard squeezing the clutch it was getting stuck but i just used a vice grip on one side while i squeezed the other with my hand, old video but still a great video . thank you

[@electronicsNmore]

Glad it helped

[@mariusofearth2474]

Ah thanks man life just a bit easyer now

[@DobleWhiteAndStabley]

Thanks man, you just saved me 200 bucks. I was about to buy an impact wrench and tried this. Best 7 minutes i spent in awhile.

[@electronicsNmore]

Be sure to rate thumbs up and share. Thanks!

[@DobleWhiteAndStabley]

Way ahead of you.

[@mcgeebeat]

You still need an impact if you need to work on your variator or clutch easily.

[@ohwell2790]

Impact wrench ( electric ) from Harbor Freight is 47 dollars not 200 dollars. Proper hand tool is 67 dollars and is found on E-Bay can be carried with you.

[@arlolockheart]

duuuude you just saved me! im 160km away from home.

[@zingo2664]

BRILLIANT video,please keep posting, can i ask you when i hold the back pulley and move my rear wheel there is a bit off play (like backlash) is this normal ? or does that mean wear somewhere ?, thank you sir.

[@chipstamper7020]

Hey man that works really really well I just did it on my ASW carbide go-kart and I didn't think I could get it off but tried it your way and work perfect thanks a lot man

[@electronicsNmore]

Great to hear! Be sure to check out my wide range of video playlists for many other videos of interest to you, and share links to my videos with many others on social networking sites. Thank you kzbin.infoplaylists

[@saifbinazad3710]

It was very informative and important in the long way.

[@SONLON]

i finally got it on i had to get someone with an impact wrench...I RIDE ONCE AGAIN..THANKS FOR YOUR SUPPORT

[@electronicsNmore]

If your belt was that tight, then you had no other option besides removing the variator. At least you're up and running!

[@TucsonOldman]

HONDA CH80 1987. Worked great on my 1987 Honda Elite 80 !! Thanks for posting this info, could do this as an emergency road side repair for sure.

[@electronicsNmore]

Great to hear!

[@johnlannigan9831]

Now thats a facepalm moment if ever there was one..!! I recently bought a dune buggy with the GY6 engine and a broken belt, i wasn't looking forward to making a tool to remove bits and generally struggle. Thanks for this tip, it's certainly a HUGE time saver.

[@electronicsNmore]

Ideally you'd want to swap out the belt before it breaks, otherwise you may need to pull out all the belt fragments and realign the rollers. Thanks for watching!

[@johnlannigan9831]

@@electronicsNmore Again thanks for the advice. My engine is in a Hammerhead GTS150 Dune Buggy, i bought it as a non runner from a reliable source, it was a non runner because the belt had snapped and wasnt with the buggy. I will certainly pay close attention when fitting the new belt and make sure nothing is amiss.

[@drdrew3]

Great video. Skip ahead to 2:45

[@frankie9457]

Couldnt figure out how to open the pulley... Realizing now, it takes two hands AND a foot for me lol. Thanks for the hrlp

[@electronicsNmore]

Glad to help

[@122803ej]

wow man thanks for such a good video, absolutely at the right time i watched this video. just yesterday the belt of my scooter brocket. now by the help of ur video i will change it with out buying tools.

[@electronicsNmore]

Make sure all debris has been cleaned up. Use a flashlight and make sure the rollers didn't fall out of position. If they did, you'll need to move them back into position using a small wire/probe before installing the new belt.

[@rcclipsenyc3804]

Thank you for sharing, very informative.

[@bevennmac2195]

This is genius! Thanks

[@miketan2459]

Your the best,sir!

[@electronicsNmore]

Thanks Mike! Be sure to rate thumbs up, subscribe, and look over my extensive video playlists below(especially my GY6 video playlist) for many other videos of interest to you. Taking one minute to share a link to my channel with others on social networking sites would be greatly appreciated. kzbin.infoplaylists

[@enockvumi7952]

Thanks for your help

[@bluemoondiadochi]

AMAZING! I thought you had to pull the variator off all the time! Will try it at some point with my scooter! This gives me the confidence to drive longer distances with my scooter... possible CVT snapping was always the bottleneck. Btw. love your accent!

[@electronicsNmore]

There's always a chance that some debris from the broken belt ends up inside the variator by the rollers, or the rollers fall out of position. Carry a bright flashlight and small metal probe to help get things cleaned up and aligned if needed. Thanks for watching! Check out my "GY6" video playlist below as well, and share. kzbin.info/aero/PLQ6IOhUBblU1bkRJ9MagPsKn_Mekq4ws8

[@bluemoondiadochi]

@@electronicsNmore thank you for your kind and insighful response! i will check it out. have a 2005 old Kymco Filly and want to keep it on the road. i love scooter & moped life!

[@pandunga]

...so far so good. Excellent !

[@electronicsNmore]

Thanks Rodolfo! Be sure to look over my extensive video playlists below for many other videos of interest to you, use supplied Amazon links to support my channel when making purchases(No added cost to you), and share links to my videos with many others on social networking sites. Thank you, and stay safe! kzbin.infoplaylists

[@davidmaltone4812]

I am finally fix this problem thank you so much for your video thank you thank you thank you !!!!!!!!!!!!!!!

[@electronicsNmore]

You're welcome! Be sure to share.

[@vmax7352]

This detailed vid is greatly appreciated!!

[@maxlove4821]

Bro wtf you're a genius 💯👈🇵🇷🇵🇷🇵🇷🇵🇷

[@raymondfrancois2898]

I always take out both to get the belt of thanks for the great tip's

[@jeffmacleod1909]

You not only saved me a lot of time but you might have saved my marriage as well 😉

[@ghostmonk8254]

Dude you're an fffing legend. Much appreciated

[@goteburgigram]

Sounds like my friend from Rhode Island

[@Lil_eee]

Good job man 👏🏾👏🏾👏🏾👏🏾

[@alexp3572]

very informative and makes perfectly sense. After how many belt changes have you notice that a change in variator rollers is needed?

[@electronicsNmore]

I replaced mine 2x in 10K miles.

[@mohamedaldamrawi7411]

I have to give you 1Million likes for your intelligent, thank you too much for this information 😊🌹

[@damram4169]

I made the mistake of putting 18,000 miles on my scooter without doing anything to the belt. Guise what it broke? I am grateful for your tip it did go on easy and I will pay more attention to keeping it up. Again thanks a lot.

[@electronicsNmore]

Glad you enjoyed the video Leonard! I have a lot of excellent videos on my channel that cover many different subjects, so be sure to check out my extensive video playlists for other videos of interest to you, rate thumbs up, and share my channel with others. Thank You

[@robertpowell2225]

Wow this is a fantastic video! Thanks for sharing this to all. Great video keep up the good work.

[@electronicsNmore]

Glad you enjoyed it!

[@Rturbo_]

Need to try this on Saturday

[@miketan2459]

You should sell t shirts or hoodies with scooters on it

[@greybeard5774]

That was a good one .. thanks a lot !! 😁👍

[@electronicsNmore]

You're welcome!

[@robertbell5290]

Thankyou now i no how to replace a belt without tools great instruction video

[@electronicsNmore]

Glad you enjoyed the video Rob!

[@gnostictracy]

i was parked at library somebody hit and run my moped while inside. making noise now from belt. do not know if will harm moped driving.i have to wait till comes in. i live in small town. this video is most helpfull.

[@emanmoral]

Mate..... This is the best video I've ever seen. Very well explained. I wish you the best. From Sydney, Australia.

[@electronicsNmore]

Thanks! It's always nice to know that people Down Under are watching. :-) Be sure to check out my extensive video playlists, rate thumbs up, subscribe, and share my channel with others.

[@Alan-ur9jo]

Thank you.

[@SoundlessScream]

My belt wouldn't slip over the front cog thing as easily as the video showed, but turning that cog with the belt on the edge got it right on there. Made the last step of getting the belt on so much easier. I carry my tools in my seat bucket.

[@SoundlessScream]

*turning that cog with a socket wrench, meant to say

[@electronicsNmore]

Glad it worked out for you! Check out my GY6 scooter video playlist below, and share it with friends. Thank you! kzbin.info/www/bejne/a6fPYqCoibt2h5I

[@lucasbrassea647]

Funny, me and my dad didn't have a impact wrench, so we did this and it works 👌🏽

[@electronicsNmore]

Never failed for me. :-)

[@watchmeedostuff5161]

Thank you for the video. It helped me out a lot. Nice and easy.

[@electronicsNmore]

Great to hear! Be sure to check out my "GY6" video playlist below for other videos of interest to you, and most importantly SHARE! Thanks kzbin.info/www/bejne/a6fPYqCoibt2h5I

[@johnlopez6315]

This guy knows how to use his nod!! Well done geezer, what a time saver!!

[@whotheynv]

definitely the way to go for fast replacement * All scooter owners keep a extra belt

[@dustin00371]

Thanks a ton for posting your video! This also works on the linhai big horn 400 , only took seconds after watching. Only wish I'd found it before cracking the bones in my hand trying to break the variator nut ! 👍👍

[@electronicsNmore]

Glad my video helped! Be sure to share my channel with others, rate thumbs up, and check out my video playlists for videos of interest. Thanks

[@FlyFreeNation]

Awesome video. It doesn't get any easier then that 👍

[@electronicsNmore]

Glad you enjoyed it! Be sure to watch my "GY6" video playlist below and share my channel with others. Thank you kzbin.info/www/bejne/a6fPYqCoibt2h5I

[@McGowan-Motors]

I got a blood blister doing this but saved my self so much time and effort, a fair trade off

[@electronicsNmore]

Must've pinched your skin. Done it before. Take a sterile needle and poke a hole so the blood can drain out.

[@McGowan-Motors]

@@electronicsNmore I'll pass on the needle 😅 it'll go down in a week, fair to say I'll never use an impact for the job again though

[@Corristo89]

It works and can save you in a pinch. If the belt is the only thing broken. If parts have worked their way into the clutch and variator, then you still have a problem.

[@electronicsNmore]

True, if the variator has become jammed up with debris, or a roller is out of position, you'll have problems.