Iphone Water Damage - Logic board repair -No power, Not charging

[@geonylove]

Datorita tie m-am apucat de electronica o pasiune mai veche de a mea, pana la tine nu am avut de la cine sa invat . Tata un depanator de radio tv ma invatat doar pana la tranzistori atat a putut el a inbatranit cu lampile lui pl500 de la tv si atat am mostenit ma bucur ca faci traba asta si ma bucur ca un roman lasa prejudecatile la o parte si da si la ceilalti o speranta!

[@adensalaglesalagle6780]

Thank you alot my good teacher

[@maxpayne8164]

I also fixed a dead and shorted iPhone 7 for my friend's Phone Shop using Sorin's tecniqe. I had not Cold Spray or Heat Camera at the time, so i did it with zippo patrol. My Dead Capacitor was on VDD-BOOST and was very easy to fix. Sorin is real Teacher. Thanks Sorin.

[@DanBurgaud]

Apple said: "Water Damaged iPhones are not fixable!" Sorin : "Hold by vape...."

[@lucianofz788]

and they are right it could be fix it could work for one week it could work for 3 months but its not permanent fix

[@springer-qb4dv]

@@lucianofz788 People like Zoran, Louis Rossmann and Jessa Jones have been fixing iphones/ipads/macbooks deemed "unfixable" by Apple for years. How can they keep their business open and thriving if they are bunch of liars? Maybe it's Apple who is lying and not the independent repair shops?

[@Alistair12367]

@@lucianofz788 who says it's not a permanent fix? You. For all you know, it was a permanent fix. You can't just state it wasn't a permanent fix. That just smacks of ignorance.

[@lucianofz788]

@@Alistair12367 you are so ignorant that i am not going to give you conversation

[@andyturner1727]

Thank you Sorin , you deserve all the praise you receive. You are one of the nicer people of this planet. :-)

[@isahizhenfahm6576]

Your videos are my new found love on the KZbin. I could watch them all day. I can't believe I'm getting all this lessons for free. I remember paying part of my savings to learn how to fix phones but the knowledge I gained from your channel is more than the one I paid to learn. Once again thanks for the wonderful videos I wish they never end. Wishing your Daughter speedy recovery from the virus. Please stay safe out. We community members need you 😀

[@bender120]

same here, explaination are very clear and I am happy that there is an app to check the board, didn´t even knew it. @Elctronics repair School is there anything similar for console and macbooks?

[@albertalvarez5901]

Sorin I just don't get it how come your not over 100k subs with all this knowledge you donate to us. I appreciate everything you do, I've been following you since under 500 subs.

[@suidiquenorgy164]

His content is for specific people ... And I love it this way

[@rrryan9719]

You are an excellent teacher! Thank you for all your videos, you make it really easy to understand for idiots just starting out with electronics like me! :)

[@broken1965]

Best micro circuit technician on the Tubes

[@gregsmith2262]

You are humble in your praise for others forgetting the fact you inspired and empowered these great people. Without this they would just be existing like the rest of us!

[@liammart3140]

I'm sure that around 8:00 in after you clean the board you can see that capacitor is a bit black. I might be wrong sorin? Also I do enjoy your shop workflow videos.

[@pushpendrasinghgola1503]

Thank you for such a nice video, I have an iPhone 7 board water damage, while connecting to battery it start to heat up immediately. I have noticed that heating start from audio ic. Can you please suggest what should I look first. Thank you

[@eg8343]

Its nice see a person teaching excellenty. A master in his profession sharing his knowledge. More power mr. Sorin. Thank you very much for the lessons..

[@ElektroTechNL]

Always fun to watch. Missing no 1 video. Time to watch the next one that you uploaded after this one haha.

[@emvdl]

Thanks again, great to watch! 👍

[@RahulKapoorokb]

You r genuine.. ... Thanks for geven us a good videos.. fault funding..

[@THDIAG]

Fantastic skill level, you are a natural tutor

[@rizwanshaa]

The way explained the problem with the phoneboard software is great. i got a good understanding, and had some problems on finding such a fault. thanks master. i have a suggestion. you have given us very good knowledge on laptop from the basics ,power sequence etc. like wise we need more vedios on iphone , like the basic structure, ics involved, power sequence etc. . thanks a lot.

[@hazimhazim9235]

And we are very happy to see your videos Sorin 😃

[@Humilityismyaim]

Brilliant once again, too tedious for me . But I love seeing what kind of things that can be removed, and what needs to be jumped ' with a piece of wire to make the circuit. Total layman, can u tell?

[@lee__1707]

Almost 100,000 subs Sorin you will soon be getting a silver youtube button :)

[@fadhilipagallo1770]

now i know the effect of using GND or negative into the testing board

[@tehnics-optics4560]

Hi, how to fine the software on Internet was use in the video?

[@tttuberc]

Really clever way of finding the short. Thanks. And thanks for the info about "phone board" softwaree. One question though: I know 4.3v is roughly the full charge voltage of battery, and supply that voltage to the battery connectors are fine. However, you apply that same 4.3 voltage to many sub circuits after the "semi-conductor". How are you sure that the sub circuits is not designed to run by 1.8v or 3.3v? thanks

[@grizzli211]

Thank you .Another great video .

[@TFT_JOURNEY]

Nice video again sorin..can you tell to us if what kind and model of the microscope you are using?

[@Martin-ot7xj]

Hi sorin,can we use tweezer hot gun instead of hot gun for remove capasitor, like YIHUA 938D hot tweezers hot gun? Did you use it??

[@MrShuer11]

Salut Sorin, am o placa cu exact aceeasi problema. Din pacate nu am echipamentele necesare pentru a verifica de unde e problema. Crezi ca iti pot trimite placa sa te uiti putin la ea. Sunt foarte multe poze pe care vreau sa le recuperez de pe telefonul respectiv. CUm pot lua lagatura cu tine?

[@derekarridge23]

The only bit I don't understand is that that Cap must have been put there for a reason. Won't removing it affect the way the phone works in any way?

[@fadhilipagallo1770]

thank sir i have lean how to apply GND and Negative into the board

[@MistaSierra]

Good morning pal, I would really like to know what it is you are doing when you tip the alcohol onto a board and and put amps into the board to find wich part is getting hot.. what do you use to do that..?? I am a beginner in the practice by the way... best regards Andrew

[@andredsoares39]

Hi! How are you? What liquid you use for cleaner the motherboard where happen this? Thanks for everything! I lived in Brazil, São Paulo and I love watch yours videos.

[@giorgostexnikos6976]

i like the jok to 16 min.thenks for explane profesor sorin.

[@Damjanhd]

Please when you set that hotair tell us on what temp. and airflow you set it.

[@KBez-op4wk]

+ is on the battery side, easy to remember (where the power is coming from)

[@krisianmalonzo9106]

your too good sorin ..nice

[@fevren]

thanks for educative videos. you are best.

[@renelabra]

it's magic. sir can you share to me your software for iphone logic board for tracing power rail. thank you.

[@hprsa0]

Good Video like always , Thank You ! Mr S.

[@EngMazen]

Thanks for your efforts. What you use for cleaning?

[@davidstokes5423]

Eng. Mazen use IPA www.ebay.co.uk/itm/IPA-99-9-1-LITRE-Lab-Grade-Isopropyl-Alcohol-Isopropanol-1L-/141522873981?txnId=1686303236004. Or you can use like Sorin zippo lighter fluid. Just it does not evaporate as quickly as the alcohol. So it’s a little better for diagnosis.

[@xformation]

Hi sorin i have the same problem but when i remove that capacitor phone was turn on but just backlight with no image what can be i can see light but no image i wonder can be some filter or something

[@msaberi865]

Yes he is a hero as you.

[@vitalijsafanasjevs8844]

Love your Channel !!! Thank you

[@garryrussell7618]

A couple of your videos you remove the damaged cap but don't replace you just reassemble? What was the Cap for?

[@renaulth2009]

Capacitors are generally used as smoothing or decoupling capacitors, they are not "in-line", and won't break the electrical connection. Look at a few schematics involving IC's, you'll typically see capacitors connected to the positive input voltage pin, but then going to ground.

[@kinbradley6288]

thank you Mr.

[@jalalyn]

Thanks a lot

[@hugolas4275]

Hello Sorin ! I'm a beginner and I want you to know that i like your beginner videos. You told us about power supply but I can't see anything like this in the playlist :( Did you stop this series of video ? Thank you so much for doing all of that for us !

[@electronicsrepairschool]

Hi, yes, but i planed to start again, just keep an eye, more has to come :)

[@hugolas4275]

@@electronicsrepairschool You're the best ! :D

[@gibransapta7244]

I love your video,very informative

[@analiensaturn]

Where do you get schematics for phoneboard?

[@yanismarbah3996]

Hi i like your video can you tell us how to start and what tools do we need and what kind of microscope you you using please? .. can i send you my phone to see if you can fix it please I'm in Bristol

[@bhushanpavan4551]

My iphone 6 is not booting. It is completely dead. Can you help for data recovery. Or even to fix the phone.

[@clivehenry5750]

Ah you didnt say the day this time,gotta be a tuesday !

[@rosco0567]

Thank you for the videos.

[@computersrepaircotesaint-l7407]

we are happy to click every click we learn something

[@weerobot]

"What is getting Hot"....T-Shirt...!!

[@zdrumpo]

The phoneboard also has the option of automatically connecting to the schema.

[@Kreska0]

Like always great video!

[@andrewg2430]

Best teacher!

[@zoltansudar6674]

Hello Master. Lets go 100k.

[@afixlampard]

thanks sorin. ur my hero . im also want to give a cheapest phone service in my town and community.btw im from malaysia

[@MrRvdbeek]

Hi Sorin i following you from the beginning now you are doing again a water damage. I did a try but no heat or short I do something wrong I think 🤔 Thank you for the great video

[@davidstokes5423]

I recently fixed an iPhone 7 with water damage. I changed 1 capacitor at the very top of the main board. Next to some of that glue stuff then changed charger port works fine £25 for broken phone and £3.50 for new charger port. Anyone can do this stuff you just have to be patient and investigate what your actual problem is. A rushed job is a bad job.

[@MrRvdbeek]

I now but if you can’t find the reason why it is not working. It’s hard to find something wrong. Every voltage is there but no charging an nothing coming on. I did repair manny water damage jobs but sometimes its just dead

[@καΝενας-δ6λ]

Sorin on next video fix this flickering go pro...

[@laboratorioassembler]

Is not a go pro.. but a logitech

[@καΝενας-δ6λ]

hahahahaha yeah dude take it easy sorin answer that before u

[@show6442]

Hi, greetings from Ghana, I can't afford a microscope now which alternative would u recommend?

[@Kravte]

Save up for one, get em cheaper on aliexpress. Its honestly worth it

[@commandroid9336]

Mobile phone camera with zoom

[@wisher21uk]

Is it my iPad going bad or does his camera keep flickering

[@Crystalservices]

What is the wireless mic model

[@electronicsrepairschool]

wish i can remember, i got it from ebay with £60 i think

[@springer-qb4dv]

good to know you can clean a board just using a toothbrush without an expensive ultrasonic cleaner.

[@akapal]

Sorin download Refox. Thank me later. Much better than phoneboard. Its board view and schematics at the same time automatically. I got a warning about virus but its not. It is recommended from rewa.

[@zdrumpo]

The phoneboard also has the option of automatically connecting to the schema

[@akapal]

@@zdrumpo do you have to provide the schema or is it automatic? I cant find anything automatic

[@greenplanetrecycling8783]

Soren make a video for biggener About phone

[@gatitodesharly]

hello teacher!!

[@analiensaturn]

Messaging on youtube ends today

[@zx8401ztv]

The evil Crapasitor strikes again !!, horrible smd parts ;-(

[@okoyekenneth609]

Nice

[@mrony8632]

I am waiting for 100k subscribe lol 😆

[@brunohenrique4940]

15:51 safadeenho kkkk

[@MentePositivaRafael]

haha cheio de namorada nova, Sorin safadao

[@papinkelman7695]

Are we going to make it to 100k?

[@ufukbakirer289]

Turkey Hello

[@ufukbakirer289]

Süper

[@KNFIX-CUCHI]

ok sr

[@samflint4749]

laptop-schematics.com/ they have the drawn schematics from apple themselves, iphone 7 document is about 80 pages. Tired it the other week and worked well!

[@muhammedsons2675]

Mr.Sorin I would like you to learn an English grammar from us as long as we learn an Electronics from you, you said I didn't found that's wrong try to say I didn't find, and you said folds you should have said faults, thanks 05:08 the problem is I didn't found I didn't 05:13 found different folds when it's a water 05:18 damage

[@Swenser]

muhammed sons keep your own grammar Sorin. It is much cooler

[@balbeth-xo9rk]

😍

[@mikepappas7137]

I swear, you get cuter and cuter in every video.

[@Swenser]

Iphone Jenga game. Remove capacitor one by one until phone dies.

[@bhdrkccc]

Sorin visit turkey bro :) there are a lot of friends of you. And call us pls

[@karaors8970]

+1

[@arvinbaba]

shot kii diode

[@eg8343]

Its nice see a person teaching excellenty. A master in his profession sharing his knowledge. More power mr. Sorin. Thank you very much for the lessons..