Sharp LED TV LC-40LE265M Power led Red light Blinking Continuously.Red LED blinking Repair Tutorial

[@renzonerecina]

Thank you so much for the clear instructions, my TV now is working so fine just like before❤

[@gyandeep9573]

Good information sir 🙏

[@teddyappliancesrepair5232]

thanks for your tutorial vidio done my same model same issue goodluck from Philippines

[@ElectroPixels]

Share and Support

[@anilraj4441]

Help full sir🎉

[@armanbenter4033]

thanks for your good and clear insruction

[@akhilmn7100]

It worked...thanks much..🙏

[@albkrysalem1712]

Verygood explain thanks foryour explain

[@das-electrotech.]

Tnx for sharing master

[@rajeshummiri7914]

It's not clear what you are saying. After removing the power cable I pressed the power and toggle ok button. Then what? Should I press the toggle up, toggle down and toggle ok button now or should I do it after plugging on the tv and turning it on?? I tried doing those toggle button steps before and after turning on the TV but it doesn't work.

[@ElectroPixels]

This video is only for technicians sir.From the comment box you can understand that its informative to others.Contact nearest Tv Technician in your area for assistance Sir

[@ElectroPixels]

First Step is to Power off the Tv then Press reset button and Ok button together by pressing these buttons turn on Tv .When Tv is Turned on then immediately press Toggle button UP+Toggle button down and last Toggle Ok button Then Tv will enter into Reset mode

[@ElectroPixels]

If it's a hardware Fault then this method will not work.

[@Zukmana]

My Sharp Aquos had a problem with the firmware, some people say the firmware must be flashing but I don't understand, what should I do? I need help please

[@aswinvm3712]

Hi can you plz help with same issue on SHARP LC-32LE341M

[@ElectroPixels]

Change Backlight, contact nearest technician in your area for assist

[@aswinvm3712]

@@ElectroPixelsbl issue rectified.but error still appears.

[@aswinvm3712]

It have keypad type toggle switch not available

[@shielamieubas3410]

Pa ano po yung sharp tv na old model po yung may back sa likod na malaki. Mag on kc sya tas bigla lang mamatay ano po sira nyan.

[@achryrn]

hi, my tv works after the reset but when i turned it off it wont turn on again

[@firhaddanyal2468]

Hi sir. I have pressed both toggle and power button. But the tv is not resetting. Still blinking in red button. Any other solution or opinion?

[@ElectroPixels]

Contact nearest Technical in your area Sir, he can help you. This Video is Actually For Technicians. In Sharp Tv blinking is mainly due to Backlight Error and it's Recorded in it's Main memory as Lamb error. So it needs to hard reset to clear. But in some situation need's to change Backlight

[@firhaddanyal2468]

@@ElectroPixels tq for your response sir. Will find technician to solve this.

[@alica589]

pressing both toggle and power then plug-in blinking red and green .. . then release and toggle up and down ?

[@ElectroPixels]

Press the power Button and toggle Button together then plug in the Tv, after that then press the up down up and long press the select Button

[@ElectroPixels]

Need immediate response otherwise it will not work

[@ElectroPixels]

If fault is with Backlight change it. If you are not a Technician then please don't try

[@nlchung2]

Hi! Sir, thanks for your knowledge sharing, I already changed the back light, during hard reset, TV can play after I key in the 3 zero, but red light blinking again after on the TV.

[@nashaserena9990]

blue screen doesnt apper sir. how?

[@meenam2326]

Hii sir first time crt ah work aanuchi after 2 days again start the problrm why sir

[@ElectroPixels]

Then need to change Backlight, may be Backlight problem

[@mohammedwafiq8107]

I am unable to reset.please help me

[@nezukocredo1888]

any tips orange blink?

[@ElectroPixels]

May be Software

[@itzmybabigt7397]

Mine has a green indicator light but the screen doesn't light up.

[@mohdishkandar7287]

Hi, i have problem i dont have toggle button just power button?how sir

[@ElectroPixels]

Maybe software issue, Using a programmer tool flash the Memory Ic

[@riyadabdulhafeed2899]

Is it UP UP DOWN OK ? OR UP DOWN UP OK ?

[@ElectroPixels]

Press the power Button and toggle Button together then plug in the Tv, after that then press the up down up and long press the select Button

[@riyadabdulhafeed2899]

@@ElectroPixels thank you sir for explanation.

[@itsbal1158]

After the up down up there only green light but the tv still not working

[@ElectroPixels]

Maybe Backlight Fault contact nearest Tv Technician in your area

[@kybarramdani2030]

after I changed the backlight, then entered service mode and entered the code 000, then I turned off the tv and the light blinked again. What's wrong? Help me sir

[@ElectroPixels]

You need to clear the Lamp error, from service mode

[@rajam1436]

Myself led 50"red light blingking

[@venomcobra9432]

My tv only have power button.. how to reset?

[@jothishpc609]

I don't see toggle button on TV sir

[@MuhammadKhan-ss4hy]

Sir remote power off again blinking About this

[@ElectroPixels]

Change Backlight

[@riezkyandika9196]

I try but colour indicator red and green. Thats it

[@md.abdullahalmamunmamun9778]

My TV model number sharp LC40LE185M. I have same problem

[@ElectroPixels]

Contact nearest Technician

[@ElectroPixels]

Backlight related fault

[@johnsick7678]

i did all correctly and it started blinking red and yellow then the screen turned on for 1 second then went back to black screen and continued its red light only blinking

[@ElectroPixels]

Backlight problems

[@fernandosagitarios2769]

nanangit nlng akoa kamot og hard reset wala gihapun

[@mohammedwafiq8107]

I am unable to reset can u help me