ELEGOO Smart Robot Car V4.0 with Camera - Assembly Tutorial

[@Tailump]

Some thing is wrong with my order because in 6:20 uno r3 does not fit in the hole is it apart

[@josephchadburn2371]

Same problem with me too

[@borislavpetkov2565]

i was thinging why my camera wasnt moving and i see now why. because of the colors the brown needs to be on the g one. Thanks for the info

[@JM-hj3sm]

Yes, I had the same problem. My 3 pin connection was backwards. I just turned it and reconnected and it worked. Thanks for the clue!

[@curtisoliver1006]

Is this able to to support higher power motors if a custom chassis is made? Also on line tracking mode, is it possible to use the ultrasonic sensors to detect obstacles and force the robot to stop and wait?

[@ElegooOfficial]

Hello, Curtis, thank you very much for your question, this issue is a bit complicated, please contact our technical support email: [e-mail], we will provide you with further answers and help.

[@enduranceawokola6976]

thank u very much for this brilliant tutorial now i have a robot of my own u are the best!!!!!!!!!!!!!!!!!!

[@erwinlattemann]

How can i change the speed? When I use the supplied sketch, I get the error: Sketch too big. Could you help me please?

[@passports5498]

Do you have fixed the error?

[@erwinlattemann]

@@passports5498 Thanks for the answer. It was my mistake, I tried to upload the wrong sketch. The question is, where (in the sketch) do I have to change something so that the car drives more slowly. In which line is the speed?

[@harshaaddanki4606]

@@erwinlattemann You Need To Change The PWM Signal To Speed It Up If You See . . .

[@Habibovic05]

I have a question. Since the Arduino Boards are already factory installed with sketch. How can you manipulate the already existing code. Or is there any website i can relate the codes respectively take them from any website.

[@TrueDetectivePikachu]

@@Habibovic05 If you go to their official page, there's a section where you can download the code and whatnot

[@istvannejonas6246]

Nagyon meg vagyok elégedve a termékkel, pontos alkatrészek, pótcsavarok, jó a help, és a program is jól működik! Köszönet!

[@kanna2378]

how can i get this code ? unable to find could you help me .

[@fabian2973]

On their website

[@anasnaif3832]

I love it I’m doing it now!

[@nadynawej3950]

Je peux avoir son programme

[@williamhuang5329]

Hanzhen harmonic drive gear , strain wave reducer, robot joint , over 30 years experience

[@sirfrancisarthur]

over half November, no Saturn :((((((((((((((((((((((((((((((((

[@ZenixEditsz]

i have a dad and none of u do hehe

[@Myself_Playz]

W

[@GameReviewGeeks-nr5tb]

Do not buy I built it and it started smoking and caught on fire and I watch the instructions and watched the video 3+ times stay safe

[@ruahsenga]

Are you certain?

[@nadynawej3950]

Je peux avoir son programme