Elektron / TR-8 TR-8S Stand - Ikea Hack - check update 2022 info in description.

[@klinkske]

If anyone cares, i added a link in the description to this music on my soundcloud. Under it is all the info to built your own ikea hack stand. Enjoy!

[@oscallator20]

Thanks 🙏

[@calvobianco]

Can confirm this also works really well with the Ramshult and Kallror. With Ramshult both the Kallror bars will be at the bottom, so you can turn it around and get a higher/lower angle depending on your preference! :)

[@klinkske]

@@calvobianco nice one :) Have fun.

[@DoctorJezz]

I've looked so hard for something like this - I've spent a fortune on multi tier stands and still needed this - I've even tried to design and order from online laser cutters to no avail. Thank you so much - brilliant!

[@meneerjansen00]

Thanks for the tip! No drilling of soldering required and the Lansa handle can be bought in sizes ranging from 24,5 cm to 84,5 cm.

[@LindseyKyle]

Cool idea! Thanks for sharing! I’ve had good luck with the foldable laptop stands as well (Amazon, Walmart, etc) for around $10.

[@TheScherzoteller]

Thank you so much for that busy man trick! That's exactly what I needed for my live and it tooks me a few minutes to build. I will use it for an octatrack, an iPad and even a 9Ux84hp eurorack case. I was not sure for that last one but its 9kg seems perfectly stable on it. I share immediatly.

[@toregilbraseth9671]

Very nice, thanks! Built three, works perfectly for me. Tip: To remove the glue residue use gaffa tape and pull it firmly off. Any strong alcohol will take its toll on the paint. Thanks again!

[@toregilbraseth9671]

And you´ve got to love the internet! :)

[@klinkske]

You are welcome :)

[@calvobianco]

Can confirm this also works really well with the Ramshult and Kallror. With Ramshult both the Kallror bars will be at the bottom, so you can turn it around and get a higher/lower angle depending on your preference! :)

[@berakdata]

Yes, Ramshult&Kallror works well. Just made 5pcs of them :) THX for this cheap and fantastic solution!

[@linksdead1974]

Outstanding!! You just made my day. Thank You

[@klinkske]

Thank you

[@linksdead1974]

Put this together. Sturdy as hell :) You wouldn't happen to have any ideas for the TB3 would ya?

[@WrvrUgoThrUR]

the ISBERGET stands are much cheaper-if less stable, but they do the trick and you can reverse stack them to get a platform if the 45 degree angle doesn’t work for you.

[@klinkske]

Thank you for sharing!

[@peter1337tolstrup]

Thank you so much for sharing!

[@AndyVonal]

That is brilliant! I'm off to IKEA tomorrow to get the bits... it's just what I need!

[@charlieg9597]

Hey - thanks for positing. I now have my Virus sitting up at a really good angle thanks to your video. I also have a Nord Rack also sitting up now with different shelves and handles but its just a variation on your idea so thanks again.

[@TwistedElektron]

thank you! amazing! works for Analog 4 &Rytm mk2!

[@ralis]

I love the video. I just ordered 6 SANDSHULT brackets and 3 sets of the 15&15/16 inch KALLROR handles to make 3 of these

[@klinkske]

Nice to see the video still gets people hacking ikea after all this time :)

[@lineorder]

Best video for Rytm user ❤

[@official-kin]

thank you so much for this brilliant hack!

[@KarzenX]

Outstanding. Love it. Funny thing is I have these parts left over and collected from AS IS and other projects from IKEA Hacks. Although, it is more fun and satisfying to custom build some, Easier than me scroll sawing one together.

[@djjuno106]

That looks brilliant

[@cyb3rk3v]

Great idea, thanks. I would just countersink the top screw holes.

[@blainewalter8933]

Buddyyyy you're a genius! Great idea. I'm going to buy these right away.

[@gaa1974]

Great stuff, thanks! Also works well with a Korg Monologue.

[@1monopoly21]

Thank you so much for the How To. One more built as a consequence. Great idea!

[@dot.initial]

duuuuude ! amazing ! i was looking for a stand for my Novation Peak .. cause the stands are sooo expensive ! Thank you very much for sharing this easy and nice idea , lots of love to you !

[@marvinlorenzolalihatu4794]

Love the synth sound that makes it's entrance at 1:44

[@klinkske]

Thank you. It is a rare synth :www.sequencer.de/syns/hypersynth/Xenophone.html

[@klinkske]

Link to the song is here: soundcloud.com/tired-ears/meeting-sb6

[@knobs_matrix]

Brillant Man 👏🏻👏🏻👏🏻

[@xandertabuzo7173]

Genius hack! Found a unique stand for my laptop!

[@bearpitrock]

Genius! Thanks for sharing!

[@DJL609]

Thank You for this Vid Great Job......

[@klinkske]

Thank you, enjoy the stand!

[@DTime]

Great! I ran of to the Ikea yesterday and bought some of those :) I would connect the top handle in the holes on the other diagonal to give it more structural integrity though. Now I have to buy stuff which fits on this awesome stand :-)

[@Doncler]

nice, i build two stands for me, everything was easy to find. As a tipp make a online research where you can find the stuff in your ikea market, you can check it online. i use the stand for my roland tr-8 and my ableton push. thanks for the manual!

[@dariodepiano9960]

Thanks a lot! Your hack is the best.. I saved my money, my gear love u!

[@robertshipton960]

Ingenious! Thank you for sharing.

[@Aesprii]

Clever idea and awesome music! :) Will build this too! Thanks for sharing! ^^

[@betteralgorithm]

Going to do this also! Nice and simple, good job!

[@aknekd]

[@clem8301]

This is awesome. This will definitely save me a lot of money. Does the stand tend to back up at all when you are mashing buttons and twisting knobs?

[@klinkske]

put a towell under it. Or buy and use some more of those round sticky thinks to keep it steady

[@frankmason5525]

Lansa handles now discontinued. Kallror looks like they should be a suitable replacement, but I haven’t personally tried them, so double check. Update: I have just made arrangements to visit my nearest Ikea store, but it is two hours away, so I will not be able to get up for a few days. I will get the Kallror handles, and report back. Update 2: The good news is that the pair of Kallror handles and the two Ekby Valter brackets cost me a total of £8.50, which is incredibly cheap for a synth module stand. (My stand for the Roland SE-02 cost £51!). The other good news is that it holds my TR8-S perfectly! I got the 405mm handles, they also come in 213mm and 597mm sizes. These are so versatile. I currently have one stand holding a TR8-S, a second one holding a DSI Prophet 6 module, and a third one holding a Novation Peak. All are completely stable. I have also seen a pic of a Mk 2 Elektron Analog 4 on one, and it looks great. Just FYI, the Peak stand from Novation costs £97!!! In my neck of the woods.

[@philgolden8619]

Amazing! Wish I seen this before screwing a piece of wood onto the desk :( The Frosta stool legs might make a better looking larger stand! Or saw to fit!

[@TheAVsChannel]

Works brilliant with Ikea KALLRÖR for the Roland TR-8S!!

[@klinkske]

thx, are the parts still available? I heard that something was out of the store, replaced by a new thing. Enjoy

[@TheAVsChannel]

@@klinkske In Germany the parts are currently labeled as Ekby Valter and Kallrör. Thx again for the video!

[@denestothmusic]

great idea, thanks for sharing! the LANSA handle is not available unfortunately, do you know which handle could replace it? thx

[@klinkske]

might be the KALLRÖR. If it works, please share the info so I can update this video. Thx

[@ProfessorSaibertin]

Awesome stuff, thank you!

[@attizzoso]

Thanks for the "Mag Gyver" trick

[@robingmd9029]

ga deze binnenkort maken met huidige 2023 componenten :)

[@klinkske]

Cool. Help gerust met updates qua parts, dan update ik de info in de comments.

[@robingmd9029]

ik heb verschillende types gekocht, namen zijn totaal niet belangrijk. eender welke plankendragers kunnen verbonden worden met eender welk handvat.@@klinkske

[@joemcm1]

ace,thanks,just took me 5m -genius

[@NrY_Irie_Music]

Really nice man.

[@klinkske]

thx!

[@Mokkers_stuff]

Excellent hack! thanks! 👍👍

[@CK-7]

In Germany kallrör 40cm and ramshult would be 20 Euros. Much better than a cheap stand from the big T........

[@Lauterbachsyndikat]

nice !

[@neilkod]

This is awesome - do you have a suggestion for raising my monitors (KRK Rokit 5) off of my desk?

[@humpydum]

+Neil Kodner Maybe you did some google- fu. if not: lifehacker.com/5872323/diy-ikea-monitor-stand-for-12 or www.khairilmbahar.com/post/22257668631/did-the-ikea-hack-for-a-simple-monitor-stand-for maybe?

[@humpydum]

+humpydum encrypted-tbn2.gstatic.com/images?q=tbn:ANd9GcS7VrNi5NoBpApItnk7OamVrsr_BCmp8Ex1mNXJ78OY1BbzPxaRng or even better: www.instructables.com/id/Space-saving-Studio-MonitorsSpeakers-Stand/

[@maschwatek]

thanks for sharing!

[@humpydum]

you're welcome

[@josenunes1369]

Nice man

[@LexXmusic]

Bought! Many thanks

[@villa3177]

LANSA handles no longer in IKEA can this be replaced by KALLRÖR handles?

[@klinkske]

please read the pinned comment from the Sir up here: Frank Mason

[@roberthollander4522]

stupid question . . . .do you think the 11' bracket from your experience building this would make the drum machine stand more vertically?

[@shieldyourselfmusic8567]

great idea. Is there anyway of making it 2 tiered? I have small space on my desk

[@klinkske]

buy the bigger size and drill a few holes and a install second bar, should be ok?

[@shieldyourselfmusic8567]

@@klinkske could do! can you tell whats the purpose of the back bar - obviously the one at the bottom supports the drum machines

[@klinkske]

@@shieldyourselfmusic8567 back bar just keeps it strong and stable.

[@patsybrady]

Awesome. What's that you're using for the protection?

[@klinkske]

+Pat Brady I added info in the description. :) Rutschstopper Ø 15mm fix-o-moll or alike stuff.

[@elans7695]

hi! which is exactly the name for the parts? thanks this is amazing

[@klinkske]

I haven t been in ikea since corona. Did you read the part list in the description? Names might have been changed, knowing ikea.

[@chrisdillon8466]

brilliant

[@skulldi]

Hello I checked Ikea and it looks like it's listed as kallrör instead of lansa now but they come in 8 3/8 and 15 15/16. Anyone know which would work better?

[@RuslanKentawrus]

Ну голова)) Я себе что то подобное искал))

[@OscarPerez-zc3iq]

love the song !! where can I find it ?

[@klinkske]

soundcloud.com/tired-ears/meeting-sb6

[@newz5744]

Would this work for the Elektron digitakt? the length is 215mm. Let me know if you guys have had any luck with it!

[@klinkske]

no, the distance from the holes is 25 ish cm so no, it won't work for the small elektrons

[@Cires789]

Looks good. i don't suppose you could put a parts list in the description?

[@klinkske]

+Eric Gordon Done. ;)

[@Cires789]

+klinkske Many thanks. All parts bought for £10 and first one built. Well done guys.

[@2112jonr]

Thank you ! :)

[@jurget]

perfect

[@powomod]

jawoll!

[@klinkske]

so you windsurf land :) i tried and i was so scared, that is sooo fast... :)

[@davilicious75]

Good song, who is this? :)

[@klinkske]

Thank you, i did this song with SB SIX. A guy i met in NL - a synthforum member. Dawless jam. We used a octatrack, rytm, and a obsure mono synth and one fx pedal, i think the strymon timeline.

[@klinkske]

soundcloud.com/tired-ears/meeting-sb6

[@blackyb27]

great suggestion, but is not the angle too steep?

[@klinkske]

depends if you sit or stand up. For me it is ok to sit next to on the desktop. If you want it less steep, saw the rear wood 'legs' a bit shorter.

[@LAROSANYC]

Hi I'm trying to do this. 9 5/8" is 245mm. You say 345. Was that a typo or should I return this lansa handle

[@klinkske]

Handle is 340mm. I checked it for you.

[@humpydum]

Did this work out? You don't need the shortest handle - You need the 13 9/16 inch. We shop in milimeter here :)

[@elissitdesign]

Dang! That's smooth. What's the depth of the stand when complete? I currently have an ikea shelf that i use that is 11' deep and I'd like for the stand to fit. Thanks for sharing.

[@klinkske]

base is 27 cm - you can cut the rear wood sides a bit - then it will tilt more (lower angle) and then base is 23,5 cm. Total depth with metal bar incl is 30 cm

[@TDJmedia]

For those who assembled this hack: How is the angle? It looks rather steep. For both standing as sitting operation.

[@klinkske]

You can lose some angle if you saw the rear "feet"

[@humpydum]

if you make a triangle: middle base is 18 cm - top is 17 cm I_ - it is good if you have it sitting on a desk. If you stand, it is too steep if your desktop is at 70 cm high (table) - but again, if you shorten the end and lose part of the 'feet' at the rear it will be less steep.

[@CYBERWOODVIDEOSTUDIO]

Looks amazing i cant find the EKBY VALTER at Ikea any alternative

[@klinkske]

maybe this? www.ikea.com/be/nl/assembly_instructions/sandshult-bracket-aspen__AA-2170866-1_pub.pdf

[@klinkske]

read the sub text under the video, it's updated (2022) :)

[@vallieduncan5165]

Looking for parts today let me know if ikea has or Amazon Thanks

[@SlowCarToChina]

That's genius! But why did you put 2 LANSA handles on each stand instead of just 1?

[@klinkske]

Thank you. it improves stability

[@maverick242]

thanks for the video man. Actually for this machines the stands I think are overprice as F**K. I will try from ikea.

[@oldskooooool]

can you post a link for the "sb - on six" channel please , liking the sound :)

[@humpydum]

+HEADSPACE INVADER Sb - Six will probably enter the link soon to a personal website. Thx for your reply.

[@klinkske]

@@humpydum Link to the song is here: soundcloud.com/tired-ears/meeting-sb6

[@nnoiz]

great, thanks !

[@JeanMasturbin0]

THANX !!!

[@davidholmes3776]

Would that fit an ER-1?

[@humpydum]

+David Holmes no idea waht size a ER-1 is. But compare it to the tr8 - i guess it should work. If not - ikea sells bigger EKBY VALTER * 2 (brown wood) that might work.

[@PujoPop]

Are they good also for Digitakt/Digitone?

[@klinkske]

no :/

[@rathersharp]

good

[@DanielC__]

Music is fine but I'm sure almost everyone coming here is more interested in the stands. Your lack of likes is due to crap info on where to get the parts and better illustration. The video is a fail

[@klinkske]

really, did you check info underneath the video?