Elgato Wave Mic Arm Low Profile V.S High Profile (LP v.s HP)

[@ArashiKageTaro]

30 times this man mentioned the words “mic arm.” What an absolute legend

[@zzoe1621]

Your a legend bro

[@DayoSamuelMastery]

🤭hahahahaha I burst into laughter at that point in the video

[@lyanneashi]

Wtf hahahahha

[@itsthehumor95]

Lol, you're a legend for counting

[@bellesbae]

I just picked up the LP. Makes my desk look CLEAN!

[@tombuck]

Awesome comparison- I’ve heard really great things about the HP 👍

[@brois841]

They are the best mic arms for sure. I've tried a few. I currently use the high profile arm, but it intrudes a bit much on my webcam space. Will try the low-profile. I use it with the Shure MV7 for Zoom/Teams/etc. meetings.

[@brois841]

Got the LP it's nice. It also fits into the same base. Murray may have had his tightened down with a hex key? Shrug

[@anthonykol]

@@brois841 can i install it in the side of the desk, because all the videos I have seen the arm is on the front?

[@brois841]

@@anthonykol yes, mine is installed on the side

[@anthonykol]

@@brois841 thank you!

[@lyanneashi]

So I was desperately looking for a boom arm I can use for my Shure MV7 because we only have limited options here in the PH without breaking my bank, then I saw this vid. Such a great help!

[@AI_Codziennie]

Thanks. I am just buying one of those and is exactly the test I needed. Thanks again.

[@dyloncai]

KZbin happened to recommend this video to me and I'd like to thank you for showcasing the LP mic arm which brought it to my attention. Will be verifying the dimensions before getting one since they also have a white version(my PC case is white). Thanks again for the video and have a good day.

[@dmitrykisel9564]

Thanks for the review, it was helpful

[@RaikaSTi]

i got the version 2 low profile mic arm. it has a knob so you don't need to use the allen wrench to adjust the height

[@aodventures]

Where did you get the version 2?

[@RaikaSTi]

@@aodventures best buy. it doesn't say version 2 on the website and i don't think it does on the box. you just have to buy it, open it, and check if it has the knob. i'm sure elgato are only selling v2 now

[@dna8269]

@@RaikaSTi I actually wish it had the allen key. The knob is hard to turn to once its tight, and sometimes there is still sag even when its tight

[@fonykid788]

This video was super helpful. I think I will pick up the LP version. Thank you

[@MurrayFrost]

Glad it was helpful!

[@LeoMora65]

One of the best videos I’ve seen, thanks man

[@Tayna_vy]

Purchased because of your video. Thanks!

[@MurrayFrost]

Got you like it!

[@Dr_Lesin]

Good video TY

[@TEMPHUiBIS]

It's like Low profile or High profile, isn't there a mic arm that does both? I would like a mic arm that goes really high and then folds back down to the how low profile tucks in

[@rorothegoatboat]

gap in the market, fill it.

[@ricewig2]

Thanks man!

[@NinjaGang]

Great video brev

[@apidas]

good video, great info you display

[@rene7975]

Question from a local broadcaster We are looking for new Mic Arms in our local studio. This studio is used for about 15-20 hours a week. Would these Elgato arms be feasible for us? We are using Rode Broadcaster microphones which are 577 grams

[@MurrayFrost]

Yeah. It would totally work! But it’s up to you and what mic arm you prefer

[@joeschwartz2636]

you unbox like i open presents for xmas, LIKE!!!

[@or10nsharkfin]

I've had the LP since they announced it. I want to see how the HP looks with my setup, but I can't justify spending another $100.

[@MurrayFrost]

The low profile is great. I have both and they both just look so good

[@shaolincharles]

I love your content! Also, what is that chair you are using?

[@Niiipon]

Hey! thx for the video! I am getting the low proilfe. thanks alot! :D

[@F1_TCG]

i love how he just throws the packaging of the mic lmao

[@MurrayFrost]

Hehe 😉

[@PSORIK]

0:37 на какой микрофон у тебя ведётся запись в этом видео, что за модель или название

[@JumboTTV]

I'm only 2 minutes in so far but I want to say thank you for this video! I'm currently using the Blue Compass with the Wave 1 and the arm just does not hold position, Lucky I haven't had it 2 years yet and amazon have offered a full refund. I was pretty excited to discover that elgato made an arm for this :)

[@Hunter78818]

How’d you convince Amazon to a refund

[@photo-markus]

Which one will you use more? If I take videos(not at home), in different rooms with different tables, which one is better, less intrusive in the video? Could you mount them eventually on a mic stand, if there is no table?

[@onlyskill7003]

Do you can use the High Profile as a low profile under the monitors?

[@OD_Plays]

where did you get that nice xlr cable for the mic

[@BarbDesautelsCalgaryRealEstate]

I am new to video and want to get one of these arms. I like the arms to be out of my shot when I make my videos; which would you recommend? I would like to know if they can be above my head out of frame. Thanks, great video.

[@LaceyMoore-e5t]

Hi Murray, could I ask, is the Wave 3 mic good for performing a track on?

[@desoxy2093]

Thank you

[@shaolincharles]

Can you please tell me if I can put the RODE Podmic USB on both?

[@SaultiBalldeip]

The low profile one I just bought has a plastic wingnut at the 1st elbow, yours does not. It seems mine is an older model and yours has a spring within it, damn. Mine is so loud when I have to tighten the nut and doesn't stay in place unless it's tightened. Sending this back for sure.

[@joemanjbm]

I enjoyed when he was talking ab the mic arm most verry interesting video

[@MurrayFrost]

Thanks man 👍😁

[@Maxiow]

Doesn't these arms damage your desk?

[@MurrayFrost]

It wont damage your desk - 1:05

[@zoltanzana]

@@MurrayFrost It can damage your desk easily. Think of the metal top falling on your desk or keyboard.

[@Andrew-qh2ub]

@@zoltanzanadon’t get the cheap boom arms they tend to scrape your desk

[@Luke-gz5yj]

Havent they changed the LPA one because i ordered mine recently and the LPA has got a fastening knob on both ends. i noticed the one in the video hasnt

[@starkerrobert]

thing is... idk where to put it when i don't need it... for example when i use it from underneath my monitor, my mic won't go underneath it and behind it... where do i put it??? please let me know if my question was understandable and reasonable because I'm tempted to buy a LP arm :) Thanks in advance!

[@thatguynick411]

Should I get the shock mount with this mic and mic arm?

[@SkybassX]

My desk requires a grommet style hole. I have the Rode PSA-1 and was curious if the mount I have would fit the Elgato portion as I would not be able to use the clamp style they include.

[@ilarvie]

Hey, keep up the great work, at frame 0.28 of the video what is the name of the stand you are using to mount your DSLR camera? thanks

[@MurrayFrost]

That would be the Master Mount amzn.to/3KsYqBG

[@ImRickyIWin]

I have a support bar running along the bottom of my desk near the edge that's a little bit less than 1 inch wide, do you think a mic arm would stay secure on the support bar?

[@jonathansanchezmedina]

hello. for gaming.. to play which is the most comfortable?

[@MurrayFrost]

For comfortable use, personally I like the high profile for that

[@FaelonZ]

5:00 lmao it definitely doesn't cancel it, it's just less pronounced

[@fufu602]

Does it come with a screw on desk mount too? Or just the clamp 🗜?

[@kieransteger5161]

Just the clamp I think

[@Foxy_proxy]

can you mount only the end piece on the clamp, making it shorter?

[@MurrayFrost]

No. It’s not designed for that and it does not fit well

[@StewartStewart]

5:42 "Elgato has made a wide range of mic arms" *Lists all two of them

[@MurrayFrost]

What I was trying to say is they have a wide range of motion. lol. They can be used for so many different situations. Sorry. lol

[@StewartStewart]

@@MurrayFrost lol I get what you mean, it was just funny phrasing 😅

[@CarrionSmile]

i own the low profile arm. it's great and recommended, BUT i wish the magnetic plates could lock into place because i find that my xlr cable yeets them off when i adjust the height of the arm. and likewise i wish the two arm pieces could lock together as well because i sometimes yoink the entire thing in half when trying to adjust the position.

[@aaronjaiehope]

Maybe some double sided tape could keep them together, but yeah would be cool to have them lock in instead of just hold with a magnet… ❤

[@d_lydian]

Can you use the LP with a Yeti X?

[@MurrayFrost]

Yup

[@cmpsoares]

How did you add the animation like the one in the end for like and subscribe?

[@ScottBrandonHoffman]

Great video! Just ordered the wave regular one. Do you know if we need to get that extension piece from Shure for the SM7B so the cable doesn't get messed up, or do not need that for the Elgato? I know for all the other ones out there, seems like that was always suggested. Would love to know, I don't see it yours here so I'm assuming not? Keep up the great work!

[@MurrayFrost]

I’m not sure what extension you are talking about.

[@acumen9569]

@@MurrayFrost WHICH ONE DO YOU PERSONALLY PREFER?

[@brandontroyer1067]

Is the giveaway over am I to late

[@PlayGameToday]

2:29 your monitor screen shaking..

[@sanchman6243]

whats that wallpaper?

[@MurrayFrost]

Just search neon background or something like that in google images 😁

[@CaribeanHaze96]

Still can't decide but good review nonetheless.

[@MurrayFrost]

What's your situation and what are your goals with a new mic arm?

[@jonathansanchezmedina]

@@MurrayFrost only gaming.. lp or hp?

[@lacey_lufc5475]

What do you prefer

[@MurrayFrost]

I like the high profile more because I feel I can do more with it

[@lacey_lufc5475]

@@MurrayFrost thanks

[@mudins]

just bought LP

[@MurrayFrost]

Nice! A good choise!

[@AKR_ice]

@@MurrayFrost Yep I just did too

[@justinswallow1072]

Very a very informative video!!! Appreciate the actual comparison part at 5:44 : kzbin.info/www/bejne/mWOWn2WOj6x2grc I wonder how many people appreciate the unboxing, demo, and random opinion sections. Wondering if this vid needs to be a whole 11mins. Great work though!!!!

[@kapturezgaming8147]

💯

[@mihalachepatasanu7296]

❤

[@emilowitch6856]

bro the so called røde psa1 aint røde

[@Tinothepug]

First comment

[@leoleo-sp1db]

For some reason you seem like 3D printed human.

[@cstrikephd]

Hi I am 1 year late but I would like to win the elgato package or ieb similar. Hook me up partner (please) ;)

[@ArthurTully]

shill vid