Elite Screens Aeon CineGrey 4D AT Projection Screen Full Install

[@AhmadnKushi]

Thanks a million. I run a home theatre and automation company. Today we installed 120” acoustically transparent screen in a small home theatre. After watching your video I basically went through the process without the instructions. Great material!!

[@dotnetdevni]

Did the lines eventually clear ? Sending a vividstorm back for indentations

[@frankrbae]

This was so helpful. Excellent walkthrough!

[@dotnetdevni]

The silver brakes is that meant to be at ur top side of screen so it supports weight

[@esolo4751]

Looks great and appreciate the video. That center rod would drive me crazy. Me knowing that's directly in front of my center channels tweeter. I would much rather them include 2 rods to install 16 inches apart (8" off center) to clear the center channel of alleged obstruction.

[@Sysshad]

Thanks for the thorough video showing how to assemble :) - it solved a problem i had with my new Elitescreen DW3 ALR

[@FeyPaz]

Thanks for the thorough explanation. really helps.

[@kaskenova]

Thanks for showing this all great video to have a look at how it needs to be installed!

[@saamr2012]

Awesome video. What is the name or type of fabric is the black backing material? Thanks

[@rajchatterjee5374]

Hello - thank you for your detailed walk-thru. I followed ur video and the manual very closely to install the 135” version of this screen. Yet, the end result is far from stellar. Here are the issues I ran into. Please help. Here are the issues I ran into: I could not make the black trim corners meet at 2 of the 4 corners. The ISF certified logo is at the bottom of the left side, yet it is on the top right corner and inverted. I realized this issue before final assembly ... but I could not figure out a solution. The Elite screens logo on the horizontal bar is upside down. The screen is not properly covering the upper left corner of the frame - this sadly is a showstopper. There is a slight bend on the horizontal frame. I could be responsible for this issue. I ended up using about 20 extra silver springs on the black trim.

[@Monstrinho35]

Have you tested this with a triple laser projetor? I have an Hisense C1 Pro and i am testing some samples from Elite and have big doubts. Actually i liked more Cinegrey 3D than 4D and liked a lot Cinewhite. It is obvious that in blacks the Cinegrey wins by far but i am going to use it mostly in dark and moderate light room (it is a big family room and not only a cinema room). It is hard to test A4 samples and see the big picture. Many people talk about laser speckle but it is hard to notice in such small samples.

[@dotnetdevni]

I just pulled the plug after ur review am uk so ur links would not have worked a cannot wait i went for clr3 as I have a ust question how far ip of the floor do u think i need for 110" epson ls 800b

[@dotnetdevni]

My ocd is going to hate that logo did u manage to hide it

[@premshashi]

Did you notice any comb filtering issues with the gap between speakers and screen being less than 1 inch?

[@gtrscort1]

Where’s the comparison video between this and the white screen?

[@steffenstengardvilladsen3740]

I would have thought the black back-material was unwanted at the speaker position

[@hanshenrik9870]

What happened to the review video? I cannot seem to find it in your video list.

[@FletcherLeTet]

Hi, trying to find your comparison video. Did that ever get done?

[@dotnetdevni]

I felt like a needed to shout there object on ur black material was driving me nuts when saw it

[@bryanlumley3077]

Might want to get new carpet!

[@NaySeld]

Maybe show the projector on the new screen? Show what it looks like with lights on and off. 😂

[@GeekSmart]

Sorry, that is in the review video, this is just the setup video.

[@richardlai4558]

The new "Aeon SB-16" better than it.