Elite Screens Spectrum Series Motorized Part 1: Overview

I broke this in two parts mainly to address packaging/overview/installation/reasoning. This will allow part two to mainly cover projection clarity, gain conversation and need vs/not need, where we can look at viewing angles and actual image comparisons.
When I start testing projectors on it I will do a Part 2, but most specifically I wanted to address an upset (the hanging method) that I feel like people should be made aware of before purchase. It's seemingly a great screen other than the keyhole hanging method out of the box.
Interested in this screen? Check it out:
► On Amazon (Commissions Earned): geni.us/8PPSW ◄
Other Elite Screens Products:
► On Amazon (Commissions Earned): geni.us/rKG4w ◄
Want to give some love back to our community? Become a Patron of Eight-Six, lets build it together!
→ / eightsixmedia ←
Have a great day, night, whatever it is, and I'll see you in the next one!
Eight-Six Gaming is currently looking for opportunistic sponsorship to take up ad space on the channel, feel free to contact and inquire.
Find me on Amazon:
On Amazon (Commissions Earned): geni.us/B9793FA
(You can see some of my idea lists, and make recommendations for me!)
[e-mail]
---------------------------------------------------------------------
Click the subscribe button to get updates!
---------------------------------------------------------------------
I get asked from time to time what some of my gear is:
Simplified list: (Ask if you want to know more)
On Amazon (Commissions Earned): geni.us/Mqo0PO
Awesome hat:
On Amazon (Commissions Earned): geni.us/ufVqTk (none are like mine but this looks close)
===================================
Talk to me on Twitter! @EightSixMedia
---------------------------------------------------------------------
/ eightsixmedia
===================================
I hope people can find use, and enjoyment in the content we produce. I'm happy for everyone who sticks around and participates. Thank you all for being you as we attempt to grow this community.
===================================
Eight Six Gaming is a budget oriented review channel, for more information be sure and check out our website.
Website: eightsixgaming.com
My links are affiliated (most of the time) thanks for helping support the channel at no extra cost to you by clicking/using them :D you rock my world.
***Music attribution
Exit Clip: Pim Poy by DL-Sounds
www.dl-sounds.com/royalty-fre...

[@garrettdodson6110]

Inside the case there’s two Allen key openings. You can adjust the drop limit to increase or decrease and you can also adjust the retract limit of it goes into far or not far enough. The switches are on the side with the motor which is will be the side the cord goes into obviously. Make very small incremental turns as to not over do it.

[@EightSixMatt]

Yeah there is a limit bar (someone on one of the two videos had pointed out) good looking out! Ultimately I set a timing for it with Logitech Harmony so I never had to mess with it. While a Harmony remote can be pricey, totally worth it and the way to go for me. :D Opens to the perfect spot where I want it (headache to set up at first but once it's set...golden!)

[@ghostwhip]

They don't even show this in the manual or white paper. Thank You

[@victorhopson5586]

So i contacted elite screens on this and you can program this to automatically stop each time at the same spot if you want. She explained you get it to where you want it to stop and then on the case it has some sort of lock mechanism. like you tightened it with a lock wrench or something and then the next time it will always stop at your set point. If you call their tech they can explain better but its easy. My screens coming today.

[@EightSixMatt]

Victor Hopson hell yeah good find I’m going to look in to that. It’s already super simple to control but why not make life easier! Thanks!

[@eddybobby6211]

Can you elaborate more in detail how to set the set point. Thx!

[@eddybobby6211]

I believe what you want to set is the rollout limit for setting the screen drop distance. Calling them tomorrow for details on where to find the rollout limit set screw.

[@EightSixMatt]

Eddy Bobby there is a limit screw for it, I just use a timer on the harmony remote for a setup sequence 😊.

[@eddybobby6211]

Eight-Six do you know exactly where that set screw is? I couldn’t find it but I speculate it may be on the right frontside of screen housing (opposite is the IR sensor) behind a 2”-3” plate with two screw holding the small plate on.

[@EightSixMatt]

If you're facing the front its on the backside left hand side

[@HyperNovington]

Hahahahaha at 4:08 as I was afking while listening to the video I heard him say, "Where I do do some screen tests." It made me smirk and think haha he said doo doo xD. Immediately after my thought it cuts to him pointing out that he said doo doo and thought it was funny as well. Sub for sure mate.

[@EightSixMatt]

Mr Catcher doodooclub 4 life

[@hangoverrescue4217]

Wish you would have shown what type of electrical outlet was needed. Is the screen battery operated? Or do you need a 110 standard outlet to Plug into?

[@EightSixMatt]

In the US it's a standard 110 type B grounded. If you're buying from a European based site I believe they sell those standards specific to those countries listed in their listings. This listing for the model(s) should inform you on these things in more detail under their details. Elite Screens also lists this on their site :)

[@matthewkrimmer7749]

You have really nice eyes!

[@donovan4009]

Could I use this screen with the optoma uhd40? Also could you recommend some 110 inch motorized screens???

[@EightSixMatt]

Oh for sure! Depending on how much you are looking to spend there are some really awesome screens out there - Just as an example check for some of the Black Diamond Screen samples. You may want something different after browsing around.

[@sudheervijayakumar3793]

Did you make a Part 2 of this video with UST projector on this screen?

[@EightSixMatt]

Sudheer Vijayakumar I did! And I demo’d some of the issues. Check my videos and it should be at the top

[@frozenelreinodelhielocosta4788]

Hello, greetings from Costa Rica, I have a ZSP-WB-B screen, Version V2. 0 the screen only had the square control, when I installed it I did not press the stop button and the screen unrolled completely and fell to the floor, I put it back on the roll, but I was left with a part outside, it does not collect completely I wanted to know if it is a programming problem or what could be the problem, thank you

[@EightSixMatt]

There is a limit bar that should stop it at two points. If it didn't it sounds like the limit bar is missing or damaged.

[@charleshetrick3152]

How loud is the motor?

[@RAMtrails]

are ripples an issue with this screen? That's what I'm most worried about

[@EightSixMatt]

I swear I thought I replied to this! Sorry! Ripples are not apparent, the tension bar at the bottom of the screen holds the screen tight enough (at least on mine). Elite Screens recommends letting the screen down to rest for 24ish hours, but mine was pretty on point the first time I let it down.

[@2502860]

Is this battery or need 120v source

[@EightSixMatt]

No battery on this one, wall power.

[@a.jbrits3449]

8 min I won't get back

[@DarthHater100]

I highly doubt that screen weighs 60 lbs.

[@EightSixMatt]

The new models are about 25-30lbs this one was one of their gen 1 ones they have since changed with lighter material (and the better anchors allegedly). The housing was hefty.

[@benhowell3337]

All your doing is whining about everything about it and now even showing how it performs. Waste of time to watch this video

[@EightSixMatt]

Ben Howell the absolute goal was to get people who feel like it was a waste time to watch the video, to then waste more time by hammering out a comment. LETS GO SLOMO SHOOT SOME MATOES NOW

[@victorhopson5586]

So i contacted elite screens on this and you can program this to automatically stop each time at the same spot if you want. She explained you get it to where you want it to stop and then on the case it has some sort of lock mechanism. like you tightened it with a lock wrench or something and then the next time it will always stop at your set point. If you call their tech they can explain better but its easy. My screens coming today.