ELM 327 interface bluetooth module

UK Get it Here: amzn.to/39iQQHz
USA Get It Here: amzn.to/2vnkfkZ
ELM327 is obd2 bluetooth scanner which can work well with iPhone and Android by Wifi. ELM327 iPhone can read out the vehicle data including Engine RPM, Calculated Load Value,Coolant Temperature,Fuel System Status,Vehicle Speed,Short Term Fuel Trim and other information. What's more, it supports all OBD-II protocols.

[@EdwinHenryBlachford]

I have a Bluetooth Elm327 on order. I'll be using it with my laptop. It comes with a free CD, which appears to be similar to your phone app. The advantage of the Elm327 is that it interfaces with Australian Fords prior to 2006. Most OBD2 readers don't do this because prior to 2006 Ford Australia fitted an OBD2 connector but it isn't wired in the standard way. It appears that the Elm327 is able to sense the pin reassignment and adjust for it. But also, I have found that there are many diagnostic programs available for the device that vary in price a lot. So it appears that the device is much more than a simple "reader" of code as long as you can connect it to a reasonable computing device. It also does "data logging", which means that you can monitor changes in your cars sensors ( such as fuel injector trim rates, oxygen sensor voltage output, mass airflow sensor etc ). This means that if you obtain a car manufacturers manual, you should be able to find the proper values of sensors etc. This means the device can be used for vehicle fault diagnosis. But, even more than that, the unit i've ordered is being supplied by a company that does performance alterations to car computers, so the Elm327 I've ordered comes with a trial version of "Palmer" software which appears able to reprogram some functions on the cars ECU. I have no idea whether the device can do all these things, but in theory any decent interface device should be able to communicate with any diagnostic software written for it. In my experience, the proper reading of a cars computer to find and fix faults is an art in itself, but at least with this device you have the paint brushes.. BY the way, I've found that because a cars' OBD2 is not used very frequently, when you plug in a diagnostic device, you should push the device in and out of the connector a few times to get a good hook up, since there is likely to be a little surface corrosion on the connector pins

[@mkhulekeleni]

hi, im using windows 8.1 tablet. everytime i try to pair the elm327 it connects and disconnect immediately by itself.

[@sandyjj3338]

I have a VXDAS Nexzscan in my vehicle: a 2007 Xterra. I was driving one afternoon when the Check Engine Light came on. My scanner determined it was my gas cap. Not only was I able to diagnose, repair, dismiss the code, VXDAS Nexzscan offers a subscription for personal use. It has features such as 40k DTC definition,retrieves generic,manufactures-specific and pending codes as well as vehicle information(VIN,CIN,CVN) .including the ABS/ Stabilitrak codes.and shows service intervals, what service is typically needed, average prices, and is able to find repair shops. VXDAS Nexzscan can show some live data as well. VXDAS Nexzscan cannot do a smog check nor show freezeframe data, but with my model year to fail a smog requires extreme wear in the exhaust or engine, which it has not come to. I’d like to see a comparison of VXDAS Nexzscan and ELM327, along side dealer-level or shop diagnostic tools for fairness.

[@rafavelazquez9515]

hi I have a question where did you get the app?

[@nchauhan1620]

Hi Bhai, does the device and app read your BMW 320 oil pressure?

[@Joseph_Mkhatshane]

This helped me a lot thumb up and hat off

[@Kolmax1992]

version 1.5 not work in Audi A8 1996 year. No conection ECU

[@khubaib160]

its not working on mistubishi lancer 2005

[@brakchisamy]

nice tempt ..more video please

[@tuxnor]

Good review video.. .i have 4 different cheap elm327 ,2 of them simular to your,all working,,but some of the cheap clones like the "HH obd advanced "don`t work well,,very slow and only on a few cars,dont support protocols listed for it,i tested on my 251hp 2.5T v70 awd 2003 and on a 2002 E36 bmw the HH could not connect to ecu,,...also on a German Nazi bmw you will need a lot of hardware tools and a deep pocket as well :) he he :) i grew up in a volvo amazon,,so volvo it is for me :)

[@MrFredHoogendoorn]

SAE J1850 is one of the 5 OBDII protocols. CAN-bus/ISO-15765 is one of those 5.

[@ilpokotiranta3273]

SAE J1850 is a OBDII protocol but not the CAN protocol:)

[@MrFredHoogendoorn]

Ilpo Kotiranta Haha thanks dude. I commented that when I started my half year internship on a new possible telematic module. Funny to see I knew nothing at the beginning 😂. I'll change the comment

[@ilpokotiranta3273]

I like your attitude, life is for lifetime learning. I just bought my genuine ELM237 reader :):)!

[@anjumkhan1196]

Fred jjvkkxgkv

[@darkwalls247]

First 3 mins was unnecessarily quite very long. Thank you for the video though. Insightful.

[@jozef19801]

Hello ELM327 Interface Supports OBDII protocols I want to ask for car Peugeot goes or not

[@nareshkeswani80]

Yes it works on it

[@darkmody]

Hello, you should have showed or told how many times it took to pair it properly, becoz trying more than three times with a fail connection result means that the ELM is defected.

[@nareshkeswani80]

Moe Stone it might be i have not had it so will be adding it into my up coming video thanks for feedback cheers

[@TheTupakkamaru]

Pin Bluetooth please

[@user-cr3ck7dc1z]

كيف الغاء الرمز PiN

[@SilentHeartx]

Can measure transmission temperature?

[@nareshkeswani80]

this all depend if car has it

[@olayemifolarin1632]

How do I obtain this module

[@nareshkeswani80]

Here is have some links for you UK Get it Here: amzn.to/39iQQHz USA Get It Here: amzn.to/2vnkfkZ

[@ajaykrishna6400]

how can i connect this to linux terminal ?

[@nareshkeswani80]

sorry no idea

[@mohammedzebber7807]

I want to buy the device. What do you advise me, is it good?

[@nareshkeswani80]

Not really this one is very Old one but now days there are so many new ones available

[@mckeehan1943]

This is like listening to a Eco

[@giusepperomano9891]

👍👍👍

[@nareshkeswani80]

cheers

[@Nifty_Pete]

3:30

[@ziaullahmughal]

You should share the way, when you solve the problem to get connected the device with mbile. It also need to improve your fluency in english.

[@nareshkeswani80]

Thank you for your feedback, English is a language not a skill mate, people like yourself made a myth lol

[@083rt]

I've own one , didn't work , bought mine on amazon.

[@ilpokotiranta3273]

You got probably a crap china clone, buy a genuine one that works always on all OBDII protocols.

[@soundgood1123]

I lost my money it's not working on Ford crown vic

[@jacquesdelgado6424]

I've read somewhere that it actually may not connect to all or some Fords. Hope it did not cost you much.

[@khubaib160]

i have 1.3 lancer

[@nareshkeswani80]

sorry mate i can't really say much about this i have stooped using this kit

[@adityakulkarni8881]

Ye product aur kitne Years india me chalega ?????

[@nareshkeswani80]

Many years to come, as long as you have car with ODB port

[@adityakulkarni8881]

@@nareshkeswani80 Ok....but 3-4 years chalega ye product sir ?? India me aur kitne saal OBD port wali cars aayengi

[@nareshkeswani80]

@@adityakulkarni8881 i am afraid to say sorry i don't know much about Indian market i ma based in UK

[@technia9228]

327 not 372 tell 372 u

[@nareshkeswani80]

+tech nia you got it right happy

[@MCoblentz62]

doesn't work on 2000 Intrepid or 2004 Oldsmobile Avalon...device connects, ecu does not...unrecognized protocol....bummer

[@williamarnold7990]

+Mark Cob i was told that they are junk and i aiso thought that too,but i tried it on my samsung tablet and bang that was it worked good after storing it away for a year 2005 ford explorer/

[@MCoblentz62]

very interesting, thanks

[@Cruisingthrulife]

Thanks. Try some better apps. There are a lot of good ones for free out there

[@natedoglara]

What's a good app?

[@jacquesdelgado6424]

Thanks for your contribution but you should have explained how to actually get the device to connect to the mobile device. The software you use is poor. Torque much better.

[@nareshkeswani80]

i thought that what i had done in this video anyways thanks for your feedback i will try to improve.

[@s.ehrgott1144]

Connection problems are one of the main indications that it's not a genuine elm327. Many many many fake elm327 chips.

[@thegooserider7245]

Just get on with it ffs. You speak to slow it's frustrating!

[@A.nasierkhan]

Lol

[@stellawylie3330]

J.net I

[@nareshkeswani80]

?

[@chirpingbluebird]

Fake accent.. it's not elm 372..

[@nareshkeswani80]

Wow thank you very much for your comment

[@navingopaul5855]

This elm is crap.

[@willyboydelacruz8389]

Scam