Powder coat bullets in half the time. Promise! NEWS

New powdercoat method gives back your brass tumbler and your time. Now that's some, elvis ammo! Happy shooting! The universal gun accessorie AMMO.
~-~~-~~~-~~-~
Please watch: "300 AAC BLACKOUT (bullet chambering) IMPORTANT NEWS............"
• 300 AAC BLACKOUT (bull...
~-~~-~~~-~~-~

[@jschirr]

so confident that he did it with a white shirt on. LIKE A BOSS.

[@elvisammo]

: )

[@italianrelic]

Comeback Elvis we miss your videos

[@vincentlok8894]

You could jump straight to 8:00 and save some time if you want to see his new method.

[@ericlaird7508]

ELVIS,I have been watching your video's now for a while and have learned so much, you rock! I love to learn new thing's,time is everything and cutting the time to powder coat is one less step in the process of reloading KEEP ON ROCKIN IT ELVIS!!!...

[@estebanvializ9985]

I've followed your lead in putting the bullets for 4 minutes in 150 degrees amd placed the bullets on the powder coating and it's working perfectly. Thanks for everything sir. Esteban.

[@georgewilliamson5182]

I am just getting into powder coating. I was referred to you on you tube from the fellows on the cast bullet forum. I like your videos and as soon as I compile everything I need and a spot to do I am going to tackle this. I have been casting bullets for over 40 years. Thank you greatly!

[@bobcat9314]

Elvis ammo I'm really learning alot about casting and powder coating from your channel, Please keep up the good work and keep them videos coming. Thank you for sharing you time and tricks it is greatly appreciated

[@wayneeck9805]

Thanks, That is something I will try. This process saves the leading in the barrel of my pistols, so that is some great information. And as for dragging out a video, guys like me need that so we can process all of what you are saying. Thanks for a real good job of teaching others and sharing your talent!

[@jimwhite9483]

Elvis, where'd you go? Miss your videos and real world experiences you've shared with us!

[@taz9433]

Good thinking! Thanks for your insight.

[@ericlaird7508]

Man that's cool,you have ton's of experience obviously!, Keep on ROCKIN it elvis ammo!!!...

[@aaron1q2w3e]

Fantastic tip for powder coating fast. Hated trying to get the static before. Thanks a ton!!

[@davidg9953]

Thanks, I'll try this by next weekend. I really appreciate the effort you put into sharing this method.

[@eqteck]

Thanks for doing all these videos, they have been helping a lot. I'm gonna do my first PC this weekend.

[@gungenttv2024]

Thanks for the video homie. I’m just breaking in to casting and reloading. Your videos have been the biggest help. Keep it up! Thanks!

[@1820kj]

Thank you very much for all of this information. I have started powder coating my bullets for my 357 mag and your tips and tricks have helped me a lot.

[@elvisammo]

Thanks Karl Jones.... Glad to help.... thanks for watching!

[@rudystransky2140]

Elvis you are the man! Thank you for sharing! This is the best method I have seen so far. I am going to try it tonight. Thank you again!

[@elvisammo]

thanks Rudy....! nothing much to it..... thanks so much for letting me know how ya this system! happy powder coating to ya! !!!!!

[@Rob_Diamond]

I like that method. Can't wait to give it a try. Thanks for sharing!

[@elvisammo]

your welcome Robbie, you gonna like it... thanks for your comments! !!

[@bobhartman2571]

Elvis - You Rock! Your a winner. Thank you!

[@elvisammo]

thanks! Bob Hartman.....

[@gregsmith9772]

Honestly I've been heating bullets slightly before the application of the powder for years now. Now I feel like an idiot for not telling people sooner. It's very effective and it does coat very evenly. Great job an excellent demonstration.

[@sydurgraham7760]

Saved to my reloading playlist. Amazing job, man. Thank you.

[@JASepichunter]

Holy crap this is WAY easier than other methods I've seen. Will most defiantly try.

[@doctorxring]

Good work man ! Thanks for doing the research on this and then sharing with others. Those are the best looking powder coated bullets I've seen.

[@elvisammo]

thanks doctorxring.... thanks for watching and commenting!

[@catseatcheese]

WOW. You are some kind of evil genius. I leave my bullets cool before breaking up the big stuck together wad, which you know causes damage to the paint. I've learned a lot from you. Many thanks!

[@MrMcbear]

Outstanding. Definite improvement on the process. Much faster than tumbling for like 30 minutes lol

[@PatriotPaulUSA]

Awesome job Elvis.

[@outwhitu08]

very well done! thats some great R&D on powder coating bullets, a big leap in saving time to produce a top notch product, thanks for sharing the information.

[@elvisammo]

thanks outwhitu08... Thanks for watching!

[@campbell2054]

That will work, thank you for the video!! What a great improvement over the other methods.

[@elvisammo]

thanks for the comment Campbell, happy powder coating to ya!

[@ricklander5030]

Outstanding presentation Elvis, you have come up with a winner! Thanks for sharing!

[@elvisammo]

thanks brother! I'm hoping people like me that love powdercoat will see that... what a time saver!

[@ricklander5030]

+elvis ammo too bad we live so far apart!

[@benworkman5770]

Thanks for thr tip, I do however size my bullets as a final step

[@ralphbolda3139]

Tried your method of powder coating yesterday for the first time. First attempt was a total success. Thanx for your videos and keep them coming.

[@elvisammo]

hey Ralph Bolda... your welcome.... and thanks for watching!!!!

[@madewithscraps]

Defiantly appreciate these videos. They are a little old, but still work; like me.

[@alexgavieres8293]

Thanks for sharing! This simple preheat method makes the most sense. It reminds me of trying to stir powdered coffee creamer into cold water. It doesn't mix, it just clumps up. But once you heat up the water, it mixes as normal. Keep up the great work!

[@elvisammo]

hey Alex, nice and simple! just like a hot cup of creamy coffee! ; ).... thanks for watching and commenting! !!!

[@kc6671]

This is good. Thought about this type of thing myself ..... getting the idea from powder coating my home poured fishing jigs using pro-tec powder paint. Which I’ve done for many years. Same idea In those instructions heat jig swish in paint bake in oven. But I hadn’t tried it on bullets. Just thought about it. Glad you did this video because it confirmed my thoughts and cut out me having to experiment as much... Thanks!

[@sawdustwhisper9397]

at about the 10 min mark on baking the powder coat reach in the oven and move all the rounds around. this will prevent them from sticking to themselves or the wire. the finish product is flawless

[@MrAntisubmarine]

Hey thanks - well explained and it worked for me. I did find for larger (8mm Mauser) bullets, it helped give a much better coat on them when I shook the bullets in the powder, let them set (stop shaking) for maybe 3 seconds and shook them again - then poured them out.

[@azvoltman7335]

Great video! Thats ballsy, white shirt while powder coating,now your just showing off!! Thanks elvis.....

[@elvisammo]

thanks for noticing I was showing off!!!!! : )

[@ozjado]

Im a noob at this but im sure i heard you mention this way of doin it in another video so I tried it on my 1st time and worked a treat thanks heaps mate

[@larrykool8637]

I really like your method.

[@TartanJack]

Elvis... I realize you posted this over a year ago and have since made new discoveries like the low temp method. But I just did my first batch of ammo today (9mm) following this method and had really excellent results with Harbor Freight red. My only problem is that my $4 used Goodwill toaster oven can't seem to repeat temperatures accurately. My first batch was golden, my second batch not so much. But knowing I can get great results I'm sure I'll sort the temp thing out. Which is all a very long way of saying thanks for breaking so much ground in powder coating.

[@SNAKEDOCTOR99GT]

Enjoyed the Video,did my first run at powder coating today after watching you.Turned out pretty good,thanks for the video

[@elvisammo]

hey SNAKEDOCTOR99GT... congrats. .. it gets easier and better. .. thanks for watching!

[@butopiatoo]

Thank ya, Thankyavurymuch, uh-huh. Great video Elvis! Love the "dueling powdercoaters"!! Pretty brave doing that red powder wearing white too!!!!

[@EricAmerica]

Great job Elvis Ammo... I've been ES coating with a PC sprayer and that wastes a lot of powder and time but produces perfect results. I'll try your method ASAP. You've helped all of us reloaders, casters and powdercoaters by testing and experimenting and sharing your info. Thank you. Keep up the great work. I just subscribed to your channel and plan on watching all of your vids. Thanks again.

[@elvisammo]

mick9mm. thank you for your kind words! I'm gratified by all of the kindness and welcome that I received from this community, thanks for taking the time to comment and happy powder coating to ya brother! !!!

[@brianjjohnson1977]

Elvis i followed this and bam over 2k 223 cast bullets baked n broke apart in 40 mins total beautiful coating.

[@rvenneman]

Excellent. Thank you.

[@thecrustyoldmachinist9384]

Outstanding method. Now I need two toaster ovens. Thank you

[@mcc19611]

Tried your method and it really works great!!!

[@elvisammo]

hey Michael, man I'm so glad! thanks for letting me know. ... less equipment, less noise, less time, land less mess..... Happy powder coating! !!!

[@mgcreed]

I tried this today and it worked great.

[@pilgrimm23]

Thanks. I have tried the tumbler method and all I end up with is a mess... once I failed to tighten the wingnut enough. That mess was epic. Your method: genius.

[@elvisammo]

Grey pilgrim, hey there, sorry about the tumbler mess! I Used to put the tumbler in another building because of the noise. this system is simple and it don't make a sound! thankya there pilgrim for commenting! !!!! HAPPY POWDER COATING. ....

[@cbrucesbiz]

Glad I found you vid. I always planed to cast after I finished all my builds. Looks like about this fall will be on the calendar. Now I will be casting and coating. Thanks much!

[@elvisammo]

Thanks C Bruce. .... remember reloading is like Legos , more and more! But it's FUN! happy powder coating to ya!

[@bubbagrant]

Thanks elvis

[@ericlinders721]

Makes a lot of sense Elvis.........:D

[@mickmoriarty5442]

Cool system. I've never seen anyone powder coat bullets in Australia as the polymer coating was developed here and we have been using it since the early 90s. This system is very clean and DIY friendly. I'll be trying it, thanks.

[@elvisammo]

Hey Mick Moriarty.... Let me know how it goes for ya... Thanks for watching!

[@meagadeth2metallica]

thank you for sharing this, I just about gave up on powder coating

[@elvisammo]

hey, megadeath2metalica, glad I could help, I also have a "powder coating in half the time marathon " video you might like.... tips and tricks!!! thanks for watching!

[@stankrieger3598]

Very good I will be using your method I powder coat customs parts for bikes ans cars so this will fit right in. thank you Stan

[@elvisammo]

Hey Stan Krieger... That's Great Also check out the method I use in my Eastwood Ford Light Blue Powder video... Happy powder coating to ya!

[@wyattcollins303]

Boy you have a great setup. Loving that lead setup.

[@Red_right_hand1]

Great job elvis

[@gotowned3123]

thanks for the info! I've been fumbling around with powder coating and tried every method, this works, got some 170gr 300blk bullets in the oven now.

[@elvisammo]

hey Got Owned... check out some of my other options and methods.. too! a few other videos... thanks for commenting !!!!!

[@4570reloader]

great video, something i haven't gotten into yet but you sure make it look easy!

[@christopherpeterson1400]

Great tip.. I used it today.. I think it helps dehydrate the reuse powder also..

[@JucimarPereira]

Fantastic!! Thanks for to share!!

[@ocean374]

i like that i didn't want to get into powder coating but after seeing this I'm going to do it thanks great video.

[@elvisammo]

easy breezy! !!!!!

[@elvisammo]

thanks ocean 34 happy easy breezy powder coating

[@chevyfan34]

This is absolutely fascinating elvis ammo, will do this man.

[@elvisammo]

thanks ,Matt it's a great method! enjoy! thanks for taking the time to comment. ....

[@Airwolfe79]

Awesome! I'm excited to try this.

[@elvisammo]

hey Airwolfe79 it's an awesome system! I also have a newer video "powder coating bullets in half the time marathon" I give lots of details and tips and tricks! happy powder coating to ya! !!!! thanks for taking the time to comment. .....

[@cannoneer155mm]

That's the quickest way to coat I've seen to date.

[@louisleoncini9240]

THANK YOU.

[@elvisammo]

your very welcome!

[@michaelhopper7487]

I like that I'll start doing mine that way it has been harder in the past.

[@davidsauerwrx7460]

Great Idea Thanks

[@TreeTopFlier]

That dog will hunt! Thanks for sharing with us...great process.

[@elvisammo]

hey treetopflier thanks for the comment! ! happy powder coating. .......

[@otunca]

THX for the video brother, I am using the Colon Guard container it works so great on me. ( if you are asking how to get it just go ask your doctor for a test and claim that you never get it )

[@paynectygardener2033]

I am very fortunate to live close to powder coating business that sells a pound or less quantities at reasonable prices in 50 colors. Thanks for idea about heating bullets to 140 f. for 4 min. before applying powder coat. Will use your idea very soon.

[@Goldenkryptonite999]

HEY YOU TUBE!!! Today, today! I got to say that this was an awesome video! Those are some NICE bullets! I love the lead brick wall in the background corner. This method worked awesome! I combined the Harbor Freight yellow and white and got great coverage with a color best described as Orange Creamcicle. Lol. Take that Fortune Cookie 45LC from the hot lead Zone!

[@harrydietrich2749]

Very good information on powder coated time saving

[@elvisammo]

thanks Harry , thanks for taking the time to comment!

[@mcc19611]

Will have to try it out tomorrow!!!!

[@archersfriend]

Off to the shop to try this. Great Ideal. I am sure 45LC will LOVE it.

[@elvisammo]

thanks Archersfriend, for the comment, enjoy the powdercoat!

[@ashleynevins4458]

Thanks for your help.

[@elvisammo]

Your welcome Ashley, Thanks for taking the time to comment!

[@boddyxpolitic]

The fastest & best powder coating method video on YT...thanks for sharing

[@elvisammo]

yeah thanks! neater cleaner faster.... thanks for commenting. ..

[@TRprepper]

+boddyxpolitic Thanks for the heads up on this channel politic!

[@boddyxpolitic]

+TRprepper Whats up TR....Yeah i was shocked how fast this was, now im willing to give powder coating a try. before this, powder coating just seemed like a pain in the sack. hopefully you can use this method TR.

[@TRprepper]

Going to give it a try for sure.

[@richardbest6588]

Great video... I'll be trying it 👍 thanks

[@krossF]

great idea man, not a fan of powdercoat but now I'll have to try! also good work with the 223/556 cast work. subbed man

[@guntharreform1864]

Innovation is the cure for mediocrity and drives perfection. Your process is innovative. Thanks for sharing it.

[@elvisammo]

hey James Weida... good saying. ... thanks for taking the time to comment! this process has helped us perfect the process. .....we're getting better. .. ; )

[@frankiehicksfishing]

I have been doing this all along on my bullets. I used to powder paint and I would paint fishing jigs with it, all you had to do is heat them a little and dip them in powder, they would automatically stick the paint to them then bake. ..

[@edstimator1]

hats off to you for finding your own way. Try this...same thing only cook them for 13 minutes at 350.....works great!

[@mrzrog]

I am using Eastwood Ford Lite Blue with this method, the man is correct. It is easy and will save you a bunch of time. This makes me laugh at the people who spend all the time using a spray gun and trying to find a way to suspend the bullets with a wire in the lube grooves. It’s a waste of time. Elvis has this down, listen to him. The only thing I add, is I dunk the bullets in a cold bucket of water when they get out of the oven. The cold water prevents them from sticking to each other or the wire

[@joep4235]

great info! I get good results with the shake method but I use expensive powders. I would love to go back to harbor freight colors and will try out your method this weekend.. thanks!

[@reinabachata]

Cool method! Thanks for sharing :)

[@elvisammo]

thanks

[@gunlover1955]

Nice, the whole idea is to lock in the lead so it does not foul the gun as fast this is perfect. THANKS

[@eXdXgXe4life]

New sub here! I'm excited to see any new educational content. Thanks!

[@elvisammo]

this is the place to be! thanks for commenting!

[@larryg559]

Good method it works well for bullets. I use the same method when I make my jigs for fishing 👌 pretty much same baking time and preheat, just different type of powder paint tho

[@RockHounder-jn8hs]

man i been struggling im trying this as soon as i get home thanks for sharing

[@kevincostantino2746]

thanks for the video. been reloading for many years. looking to start casting my own bullets.

[@elvisammo]

I bleed cast bullets , love casting, reloading, and, powder coating. you will too.... thanks for commenting!

[@Tewodros52]

outstanding job. you the best.

[@elvisammo]

hey there, tewodros... thanks so much for your kindness, and taking the time to comment!

[@q-shine671]

Righteous! Thanks for the, "effective effort", have to give it a try. Today! Thanks again. God Bless.

[@elvisammo]

God Bless, USRA vet. your very welcome! I just got through powder coating a batch just now! no more loud tumbler. was listening to country music. ... thanks for taking the time to comment! !!!

[@HalfStarFilms]

Thanks for the info.

[@elvisammo]

you welcome Half Star Films!

[@andrewcalderon3942]

Very neat. I'm gonna give it a shot.

[@elvisammo]

it's easy breezy! thanks for the comment. ...

[@jimmietrain]

love it!

[@vdog4799]

I remember these videos! YOU got me started Elvis. I miss you man. Hope you are doing ok buddy❤👍 Wherever you are. Peace my friend

[@speedtriplll]

Thanks you made my life a lot easier just starting out cheers fro OZ

[@elvisammo]

hey Greg..... check out some of my other powder coating videos. . I offer some other methods and some other options! good luck to ya brother! !! thanks for watching!

[@gascheck8151]

The only guy I have seen wearing a white clean shirt in a loading room. A cooks hat would top it all off. Thanx for the info.

[@stevegoetz1564]

Thanks for the video

[@lorka42]

Three shall be the number thou shalt count, and the number of the counting shall be three. Once the number three, being the third number, be reached, then lobbest thou thy Holy Hand Grenade of Antioch towards thy foe, who, being naughty in my sight, shall snuff it. AMEN.

[@scrappybobbarker5224]

You been snuffin somthin