EMAX TINYHAWK - SETUP TIPS/FIRST FPV FLIGHTS/CRASHES!!!

[@billsomrak]

You know, you don't have to go into Betaflight to change your Profile. You can do that right at your TX. To change profiles, with your quad powered up, hold the LEFT TX stick in the lower left position. Now, if you push your RIGHT stick full LEFT, you will be in Profile 1 (you should hear your FC beep an acknowledgement). To change to Profile 2, hold the LEFT stick in the lower left position, and then move the RIGHT TX stick full forward (up). To change to Profile 3, hold the LEFT TX stick in the lower left position, then push the RIGHT TX stick to the RIGHT. Each time you change the Profile this way, you should hear a beep acknowledgement from the FC .. or perhaps see an internal LED flash. This is much easier than having to plug into Betaflight each time you want to change Profile. You can also use the TX sticks to do a GYRO calibration and/or an Accelerometer calibration. Won't go into those right now .. don't want to get you confused .. POW! Give it a try. The Tiny Hawk is pretty tame compared to the ET115 V2, which I can fly indoors if I fly it on 2S .. on 3S if you twitch the throttle, it will go thru your ceiling. Happy Holidays Brofessor! POW!

[@DJSOULFORCE]

Yeah, I knew about the stick commands to change profiles, but couldn't remember them since I'd never used them before. I'd better get my index cards ready for the next review and some masking tape to make notes on my TX as we've seen in other videos! 😁😁😁 Thanks for the tips, the stick commands are much easier!!! POW!!! 🎅

[@DJSOULFORCE]

Oh, by the way... the ET115 v.2 on 2s is still pretty freakin' fast for indoor flying, unless you live in a warehouse!!! Lol. Got mine a few days ago, my review will be outdoors on this one for sure!!!

[@juneloko]

Can you please make a video showing how to bind to the t8sg jumperto the tinyhawk. that will be very helpful.thanks and merry Christmas

[@DJSOULFORCE]

What exactly are you having trouble with? (Do you know basic binding procedures? Is your's binding, but won't arm? Are you using the correct protocol? Looking for the bind button???) If you need help with "how to setup the Jumper" let me know, I'll send you a link for video to watch. Good luck, thanks for watching!!!

[@réveil-toi]

beginner beginner beginner! everyone makes videos saying perfect model for beginners, but beginners do not know how to connect a radio and do not know how to set the quad with beta flight or configured the radio! it becomes boring

[@DJSOULFORCE]

If you're having problems getting your Tinyhawk to bind & arm, this video may help you. My first thoughts on this bird, after a few crashes, is "she is one tough cookie!" Did we finally find the perfect indoor whoop for the long hard days of winter that's coming? LoL!!! -djsoulforce!!!

[@DJSOULFORCE]

Spare props, batteries and other spare parts are now available for the Tinyhawk. CHECK THE LINKS IN THE DESCRIPTION OF THE VIDEO! Happy flying guys!!! 😎

[@dragonhank4217]

I've watched a number of videos on this EMAX tinyhawk and they were all pretty good with specs and such. But for some reason watching your video totally convinced me to commit and purchase one. POW!!!

[@DJSOULFORCE]

Thank you very much for your feedback and your comments!!! Check the description of this video, I have just added a coupon code to get it for $89.99. Happy flying bro! POW!!!

[@RDsRCReviews]

Awesome job DJ! As you know I'm upset I missed the profiles but from what I hear these factory set pid profiles are not common so it is understandable I overlooked them I guess. Most of the find things I complained about can be fixed by changing profiles. I set mine to profile 2 and rateprofile 2 but I've yet to test it. I'm going to make a follow-up video soon to discuss the profiles and the bind button location.

[@DJSOULFORCE]

You're right about the multiple factory PID profiles not being common. I think Emax is all alone on that one, not sure though! Thanks for watching and all of the help you gave me with this one. It's a sweet little bird!!! I'll be watching for your follow-up video... POW!!!

[@RDsRCReviews]

no, thank you! You helped me in regards to the profile video. All I did was tell you were the bind button was :) I'm recording some Betaflight video so people can more easily see where they located. Just debating between video or pics or both.

[@DJSOULFORCE]

I thought about doing a few screen shots of the Betaflight pages, but hey, I was anxious to get her up and flying and not spend the night editing videos/pictures! LoL!!!

[@RDsRCReviews]

@@DJSOULFORCE I hear ya!!

[@sonarfleet2375]

How can you hovering this drone. I am very frustrated because I can’t maintain the drone flying. It stay bouncing and I try control the transmitter. Help me please. I love to see how sweet was this flight. I want to learn to fly this way

[@DJSOULFORCE]

What remote controller are you using???

[@DJSOULFORCE]

It takes precise movements and lots of practice to do this, however, with the right remote controller, it can become somewhat easier!

[@sonarfleet2375]

SOUL FORCE QUADS TX16S

[@DJSOULFORCE]

@@sonarfleet2375 All I can do is suggest that you practice, practice, practice! Good luck. Thanks for watching!!!

[@sonarfleet2375]

SOUL FORCE QUADS I will my friend. Thank you

[@RonaldBrown59]

I've been looking at the Tinyhawk as a indoor flyer for the winter. I'm glad you liked it, because we tend to like the same birds. So I can buy it with some confidence. Now I didn't understand everything you were doing in beta flight, so I will have to play catch up in that department. Nice first look and indoor flight. Happy Holidays!

[@DJSOULFORCE]

The Tinyhawk is a pretty nice flyer. They just released a RTF version that comes with a transmitter, so that should eleminate the need for Betaflight programming. I'll see if I can get my hands on one for review!!! Thanks for stopping by. Happy Holidays to you & family!!!

[@icecorebaby]

Hi, just wondering do we have to pull out the antenna from under the canopy?

[@DJSOULFORCE]

You don't have too, but it does help!!! I haven't tried it yet, but I have seen other videos that showed if you pull the antenna up out of the canopy, you'll get better FPV range and reception. I will test this soon on my channel. Thanks for watching and your question!!!

[@gbro8822]

Very cool and you have come a long way with Beta flight :-) Have a Merry Christmas my friend.

[@DJSOULFORCE]

Thank you! 🎅🎅🎅

[@Mikey9618-x9q]

Finally someone made a video with the tinyhawk using the jumper I ordered one and I’ll be using it on the jumper I’ve been looking for a video like this thanks for sharing hopefully mine binds fine and I don’t have any issues

[@DJSOULFORCE]

Thanks for watching and the comments. If you have any problems binding or arming, let me know and I'll try my best to help you! Good luck, happy flying!!!

[@Mikey9618-x9q]

Hello soul force I’m having trouble setting up the arm switch on my jumper and tinyhawk it’s all binding fine just can’t arm it up any idea

[@DJSOULFORCE]

At 9:25 in this video, I discuss how mine, after binding, would not arm. Maybe you are having the same problem. You'll have to make a throttle value or end point adjustment in betaflight or in your Jumper. Check out the video again (click here - 9:25) and see if that works. Let me know how it turns out!!!

[@Mikey9618-x9q]

Thanks for your help I finally got it into the air

[@mattb5972]

Do you have a backup or ur factory settings? I clicked reset.. on my rtf version.. and now my modes are completely gone.. i have the rtf controller tho.. and cant find any information on how to get everything back to the way it cam in the box. Can you help me?

[@DJSOULFORCE]

When this video was produced, Emax had settings for the Tinyhawk on their website that you can "cut & paste" into Betaflight CLI. Not sure if that support is still there, but try going to www.Emax-USA.com. Good luck bro!!!

[@cyberduck7377]

Same I reseted

[@DJSOULFORCE]

Awesome!

[@edmalott1536]

great info. I watch all of your videos. I have been looking at this one. Another one to add to the collection. Oh and i am first again. Keep them coming.

[@DJSOULFORCE]

Thanks for watching buddy, happy flying & HAPPY HOLIDAYS!!!

[@mosesjh8272]

awesome and nice bathroom hehehe...The beta flight software can connect to any drone or specific? Thank you for sharing...cant wait to see the outdoor test flight! Happy Flying!

[@DJSOULFORCE]

No, Betaflight software can NOT connect to any drone. Your drone's flight controller has to be Betaflight compatable (usually stated in the description of the drone) and programmable. Mostly found in racers but Betaflight can be used on a few GPS drones as well. Thanks for watching and your question!!!

[@mosesjh8272]

@@DJSOULFORCE Great! Thank you for the explanation :) appreciate it very much!

[@DJSOULFORCE]

Outdoor flight test... kzbin.info/www/bejne/hnOXmJKpjbGjbM0

[@seanmurphy2222]

Mine out of the box is NOTHING LIKE THAT. Super, super touchy. I've got a mini indoor drone, a mavic zoom and I've been messing w this for a half hour. Beginner mode of course, took the throttle all the way down on top of that and still too touchy left and right. About ready to send it back. Any tips?

[@DJSOULFORCE]

I'll admit, setting up and fine tuning this little bird can be a bit complicated. I can only suggest that you do more research on KZbin for PID tuning suggestions or perhaps look into using the 'Mocking Bird' program/software for setup. Wish I could help more... Good luck, thanks for watching!

[@RCinginSC]

Glad your bird is finally in air . Looking forward to more. 👍👍

[@DJSOULFORCE]

I also look forward to more after this quick look at her. Now that the initial review is over, I can go inside her and do some mods, lol. Thanks for watching bro, HAPPY HOLIDAYS!!! 🎅

[@Herbflyinghigh]

👏👏👏👏👊 very good review, knocked it out of the park, Saturday is my only day off so I'll be trying some of the things you suggested, one more thing you have the coolest cat ,he or she didn't flinch when you flew that drone pass. I can't wait to see you do a outdoor flight 👍😎👍

[@DJSOULFORCE]

Hahaha, the cat has gotten use to me flying (and crashing) all over the place... now she's like WTF!!! Thanks for watching bro, let me know how your's turn out.

[@Herbflyinghigh]

I got it bound to my Jumper but had a problem with the sticks not being mapped right and I don't know how to remap it, so what I did was connected it back to my Taranis and applied the same thing to it and worked out perfectly, so thanks for the tips, and I will figure out how to change the stick command on the Jumper so Happy Holidays and Who Dat!! 👍😎👍

[@DJSOULFORCE]

In betaflight, on the receiver page, you may have to change it to "AETR" versus what the default is for your Taranis or you may have to reverse a couple of sticks. Holla at me when you got a free minute. 🏈"SUPER BOWL BOUND" Saints!!! POW!!!

[@deandaniels203]

Hi my friend I would just like to wish you and your family a merry Xmas and a very happy new year, as I think this channel is wicked and am looking forward to 2019 reviews.Keep up the good work bro as i will keep watching.

[@DJSOULFORCE]

Thanks bro, HAPPY HOLIDAYS to you & your's!!! 🎅🎅🎅

[@BadChizzle]

Hello, Buddy! Man... I hate when I can’t get a quad armed at first. Usually, for me it’s the motors page where I need to agree that I’m of sound mind and body as well as realize the dangers of arming inside. lol 😝 then I turn that switch on and I’m ready for the next nine steps or so. I mean... as long as it doesn’t change back to off when I change pages! Sheesh!! Ha ha! I’m usually good with the stock pids though, so this is a new one. I’m sure I’ll get through it, though. It does sound as if the first pid profile is for indoors, doesn’t it? This whole subject makes me wonder if all my quads might be much faster if I had changed all that by now. Hmmmmmm... ... might try tweaking one in pids, or throttle range I guess. I’ll prolly get this one after Christmas, cuz gifts n stuff. I’ve got so many things I can fly, that sometimes, my not being a reviewer, it doesn’t make any sense to get another one. Lol but... it’s what we do!! One last thing. I’m pretty sure, contrary to the popular culture, I enjoy LOS flying more than FPV. I like seeing the quad in the air as it flys around. Not that I won’t fly FPV, I’m actually pretty good at it. But... after a year or so of owning my goggles... I’m still flying my big quads across the park over three hundred feet away line of sight. Bam!! Thanks for the sneak peek, Force!!! May you have many days of great weather to fly all your stuff!!!!

[@DJSOULFORCE]

Hey bro, I'm a line of sight flyer too. Only since I started reviewing "tiny FPV birds" did I have to get into FPV flying, as you know, it's hard to keep orientation with these little birds over 50 feet away! The factory saved PID profiles (as seen in this video) is a first for me too but are easy to select and change. As far as I know, only EMAX is doing that but it doesn't hurt to check to see if some of your other birds have that already. You'll find that Betaflight will show you three PID profiles, but usually they are blank or just copies of profile #1. Otherwise, I don't mess with the PID settings and I still have a lot to learn about Betaflight!!! Thanks for stopping by brother, MERRY CHRISTMAS!!! 🎅🎅🎅

[@BadChizzle]

SOUL FORCE QUADS Merry Christmas, my awesome friend! Thank you!! 🎅🏼 Believe it or not... I’ve been getting so much fun from this Bugs3 4s monster I created, I’m building another one as we speak. Just about to hook up the receiver and do the setup. Now I’ll have a backup Dragster! Bam!! Ha ha ha 🤷🏻‍♂️🎅🏼👍😆

[@donmichaelcorbin4417]

Thanks! I was having a Helluva time binding to t8sg Plus.

[@DJSOULFORCE]

I hope this video has helped you. Did you get it to bind? Good luck, thanks for watching!!!

[@jordannovek2911]

Hi I love the video Im very new ti this so your video helps alot. Im getting my tinyhawk tomorrow . Take care

[@DJSOULFORCE]

Thanks for watching and your comments. I hope you enjoy your Tinyhawk & happy flying bro!!!

[@Georgewrigley]

Just ordered. Great review and fun flying. Cheers buddy :)

[@DJSOULFORCE]

Thanks. Happy flying!!!

[@HumbleHeartMinistry]

How do you unlock the locked Frequency and channels on the vtx?

[@DJSOULFORCE]

I really don't know exactly how to use it, I left mine at factory settings, but there's a button next to the bind button for programming the VTX. To find out what the procedure is and the LED light sequences are, you should be able to find in the user's manual. Good luck, thanks for watching!!!

[@michaelreyes8670]

Happy New Year, DJ! Do not have Jumper TX. Have to wait for DSMX or Flysky Version. Saw a blogger put a small DSMX Rx on it but I I rather wait for it.

[@DJSOULFORCE]

Happy New Year to you too buddy! Thanks for the feedback!!!

[@netofpv8030]

I can't keep my RTF VERSION still like this, i don't know why he is very fast and very difficult to control can you help me ?

[@DJSOULFORCE]

I'm not sure if I can help you. I do not have the RTF version so I am not familiar with that transmitter. If you are familiar with the BetaFlight settings and how to connect to BetaFlight, you may want to check your PID Profile settings. Change to PID Profile #1 and Rate Profile #1 and that should slow it down a bit. Good luck, thanks for watching!!!

[@davesilva9174]

HiSFQ! I just got my EMax TinyHawk1 and Jumper T8SG(carbon) TX in. Can't bind the 2!!! The TH manual says to bind in D8 mode, which is not an option on the Jumper. Just FRSKY, FRSKY V-8 and FRSKY-X. Please help. Perhaps a walkthrough video or link to one? Thanks!

[@DJSOULFORCE]

(as stated in the beginning of this video at 0:34) I'm using the original FRSKY protocol. It may not bind right away because of a need to do a throttle trim adjustment. That's covered later in the video starting at 16:47. (Sorry, I did a lot of rambling in this video and tried as best as I could to explain everything.) Good luck buddy, let me know if I can help further!!!!

[@davesilva9174]

SOUL FORCE QUADS thanks for replying SFQ! Got it open and bind on Betaflight as the sticks respond when quad is usb bound on my Mac via Betaflight. New problem is that no bind after I remove from betaflight. Odd.

[@DJSOULFORCE]

@@davesilva9174 Well, it sounds like you're getting closer. Remember to save your settings before exiting BetaFlight. I hope you get it to work, good luck!!!

[@timrobinson9192]

I can't help but chuckle when I hear you chuckle in your videos Mr. Soul Force, be things good or be things bad, you always manage a few laughs :) That trait ought to be called the SFG , Soul Force Giggle ! Looking forward to your flight outside with this one bro. Seasons greetings to you : 🎄🎄🎄👍👍👍

[@DJSOULFORCE]

Thanks. Happy Holidays & happy flying!!! 🎅🎅🎅

[@rikianthony9133]

I have trouble to bind it with my jumper t8sg, i set my jumper to Frsky protocol, freq-fine 0, freq-coarse 0. Press the bind button and power the tinyhawk, try to bind, and the led getting flash. But it can't connect to my jumper. Can you help me sir?

[@DJSOULFORCE]

If the LED is flashing, it means you are NOT bound. Try binding again. If, after you bind and it still won't arm, then follow the instructions in this video (CLICK HERE: 9:13). Good luck, thanks for watching!!!

[@fathulhumaidi7283]

I have exactly what you have. t8sg and emax rx frsky. already had it one month. i can't bind. i can't play drones .. Please help me..

[@DJSOULFORCE]

I'm not sure if I can help you any further than what this video covers. (CLICK HERE) At 9:16, the video tells how to bind & arm the drone. First, you must have knowledge of "how to bind" you Jumper T8SG to any drone. You must also have knowledge of how to use BetaFlight and speak English. Good luck, thanks for watching!!!

[@pointnozzleaway]

awesome. never knew about the profile settings in BF.....Thanks man !

[@DJSOULFORCE]

Thanks for watching and your comments!!! Happy flying brother!!!

[@mssippijim]

Hey SF, Was there any problem with binding this to the jumper, considering it is the FRSKY D8 protocol? I'm bidding on a used one and want to make sure it will bind with my old Devo 7E.

[@DJSOULFORCE]

I didn't have any problems binding it, but it wouldn't arm at first. As I explained in this video, to get it to arm, I had to make some adjustments (in BetaFlight) for the throttle threshold values and it worked fine after that. I'm using the normal FrSky Protocol in the Jumper... all's good!!! Good luck with your bid. Outdoor flight test - kzbin.info/www/bejne/hnOXmJKpjbGjbM0 After Market Battery Test - kzbin.info/www/bejne/iISWhqKnrc2EgKs Happy Flying bro!!!

[@bjornragnarsson8230]

How long does it take to charge the battery ?

[@DJSOULFORCE]

About 45 - 55 minutes! Thanks for watching!!!

[@bjornragnarsson8230]

Thcnx for the quick answer !

[@michaelreyes8670]

👍 Nice. Going to the big leagues. Like to get one this and the jumper TX. Here that Santa?

[@DJSOULFORCE]

Hahaha, I hope Santa is listening brother!!! Thanks for watching. 🎅🎅🎅

[@gdhall5311]

It seems like a nice quad DJ, do you think that it is worth 99.00 dollars?

[@DJSOULFORCE]

Thanks for watching Greg. It's hard for me to say at this point whether it's worth it or not, I'll have to spend a little more time with her! So far, I like it, but once I get her outside, I'll be able to answer your question. POW!!!

[@leelaor6201]

I hope I'm not to late?... cause I also have the "Jumper" and just got the "Tinyhawk" too, but it won't bind for some reason?... Well, yes there are tons of reviews about it, but not even one that binding to a "Jumper"... I'll appreciate some help, please??? Big thanks!

[@DJSOULFORCE]

Thanks for watching and your feedback. The very beginning of this video quickly covers how to bind. Once bound, If you're having problems arming or getting the motors to start, please watch this video again starting at 9:15. You will need to have experience using BetaFlight program and have your Jumper programmed. Good luck, visit the channel again soon!!!

[@leelaor6201]

Thank you so much for replying, I really appreciate it!... I do watch all your videos! But unfortunately sill won't bind, cause I watched this video over and over... Thanks anyhow, I guess I have to say goodbye to FPV, it's an hobby only for expects!

[@DJSOULFORCE]

You may find additional help & support by visiting: Emax-usa.com or try watching my friend's video - kzbin.info/www/bejne/iGa1lKVmn92je6c Good luck buddy, sorry I couldn't help more.

[@slugosrc1256]

You should check out the blade inductix bl it's allright I'm a spectrum piliot so explains that's Merry Christmas I'm sure you'll put out another video before that Thanks Rich

[@DJSOULFORCE]

Thanks buddy. Merry Christmas to you too!!! 🎅🎅🎅

[@HaveFaithInGod]

This is an old video I see but my problem in learning this is the procedure that happened between 1:28 to 1:29 ! Yes! You said: "Once I got it bound to my Jumper..." THAT is what I need to see. You skipped the most important newbie need there my friend. I have the Jumper Plus. Mine has 3 different Frsky choices with options within those 3 choices. There is Frsky, Frsky V-8, and Frsky-X. Then each of them have options. I love to get this whoop in the air. It's my first brushless model. I use Bayang protocol on my others and I found the .ini file at MicroWarehouse.com for that which I loaded into my Jumper. I also fly my Bugs 3 and 3 Mini using a .ini files I got from someone on RC Group. I't sure helps me just select and fly. I do understand the channel mappings and can look at those in the menu to see what switch does what. Can you come over tmw afternoon and get me flying? I'll feed you lunch! Lol. I'm 71 and the learning curve is a little steep nowadays. Watch your work always and you do a great job. I'm a self declared "senior" member of the Bugs3 Flying Crew ! B3FC

[@DJSOULFORCE]

Yes bro, this is an old video and I'm sorry if I rambled a bit and didn't properly layout the story line for this video. This part of the video will probably help you (CLICK HERE - 9:14) if your Tinyhawk binds but won't arm, OR, just let me know exactly what your issues are and I'll see if I can help. Thanks for watching and your feedback brother!!!

[@davesilva9174]

​@@DJSOULFORCE Yes I just got my Tiny and Jumper T8SG(carbon) TX in. Can bind the 2!!! The TH manual says to bind in D8 mode, which is not an option on the Jumper. Just FRSKY, FRSKY V-8 and FRSKY-X. Please help. Thanks!

[@DJSOULFORCE]

@@davesilva9174 Use the FRSKY protocol and disregard the D8 mode!

[@OscarFlores-jk5yt]

This thing looks pretty cool. I'll have to try one of there. Thanks bro. Pow!

[@DJSOULFORCE]

Thanks for watching bro!!!

[@TheTractorsman]

Happy Xmas my friend all the best to you and yours, and not a bad little bird, Cheers Mate ;-)

[@DJSOULFORCE]

Thanks Mark! 🎅🎅🎅

[@bobbest9181]

I NEED TO KNOW ABOUT DEVIATION HOW TO FINED THE DOWNLOAD & HOW TO TRANSFAIR IT TO THE DRONE

[@DJSOULFORCE]

Deviation is the software that runs your Jumper. It is pre-loaded and it does not transfer to the drone. Please watch that video I told you to watch, you will get a better understanding. Also, don't forget to subscribe to my channel!!!

[@bobbest9181]

bob best I HAVE THIS SETUP BUT I'M DUMB CAN YOU SHOT ME HOW TO DO THE EMAX TINYHAWK - SETUP TIPS FROM HOW TO BINED FROM THE START USING THE JUMPES FRON SWITCHING IT ON PLEASE . BOB

[@DJSOULFORCE]

It seems that you need a lot of help! For starters, I suggest you watch this video for basic setup of the Jumper & how to bind it to any quadcopter - kzbin.info/www/bejne/d567lnhvlLaeoJI The Tinyhawk uses the FrSky protocol and this video shows where the bind button is. There's no off/on switch, simply plug in the battery to turn it on!!! Good luck, thanks for watching!!!

[@nelsonquimbyjr5681]

cool little drone bro hope you had a very marry christmas and a good new year my friend and dad says hello

[@DJSOULFORCE]

Thanks for stopping by buddy and watching. 🍾🍺HAPPY NEW YEAR!!! to you, dad and the family!!!

[@chads3308]

Can anyone help me connect the tuna G Evolution to the tinyhawk

[@DJSOULFORCE]

Tuna G Evolution??? I hope someone can help, I've never heard of it. The Emax Tinyhawk uses the FrSky protocol if that helps!!! Good luck, thanks for watching!!!

[@acesonthego2287]

This is a nice one brother, Happy New Years like#61

[@DJSOULFORCE]

HAPPY NEW YEAR TO YOU TOO BRO!!! POW!!!

Many thanks for all the tips. 👍👌✌

[@DJSOULFORCE]

Thank you for watching!!!

[@domi671]

I changed options in beta flight now my tinyhawk It doesn't respond anything

[@DJSOULFORCE]

Try going to the EmaxUSA website. You might find BetaFlight settings there that you can copy & paste into your Tinyhawk to get it back on track. Good luck, thanks for watching!!!

[@domi671]

Thanks, i hope it will work

[@devricky]

@@domi671 my tinyhawk is currently on stock settings. Let me know if you need them, I can send them to you later tonight.

[@domi671]

@@devricky Yes please, and thank you for helping

[@devricky]

@@domi671 drive.google.com/open?id=1SxzZhdi0h39J-DtGaPzcnalpDnQxy4r7

[@johnwedrall1907]

I'm wishing you and your loved ones a Happy Healthy and Blessed New Year 😃👍🥂❗

[@DJSOULFORCE]

Thanks John, Happy New Year to you and your family too!!! 😎

[@johnwedrall1907]

@@DJSOULFORCE you're very welcome and thank you 👍

[@djwreckitRick]

The world is so small I followed this random girl on snap I remember her showing her dad and his drones lol I'm pretty sure it was you, thank you for your drone review wanting to get into fpv might get this one

[@DJSOULFORCE]

Thanks for watching and your feedback. I'm not sure if that was me or not, but I do have a daughter that's really into social media, so yes, it could've been me!!! Visit the channel again, lots more drone & r/c videos to come!!!

[@stephond.photography9867]

Mine flies like a bat out of hell. I took it to a field and she was uncontrollable. The goggles cut out and I lost her. Luckily I didn’t give up, I was on a football field but found her a block away, she landed in a yard with a Neapolitan Mastiff, the owner through it in his recycling bin because the ping was pissing his dog off

[@DJSOULFORCE]

That's an incredible story. I'm glad you found it! Thanks for watching and your feedback. Happy NEW YEAR bro!!!

[@Dronesteve-72]

Hahahha

[@leesops710]

Your cat is like what ever so cool.

[@DJSOULFORCE]

Thanks for watching bro and your comments. Visit the channel again soon!!!

[@Darksagan]

Good video. Imma try this fix once my battery charges. lol

[@DJSOULFORCE]

Thanks for watching!!!

[@dronedoutrc5970]

You can just press down on the plastic to engage the button. No tools needed.

[@DJSOULFORCE]

Thanks for that suggestion and for watching!!!

[@riche4you1975]

Mine shoots of like a flea!

[@DJSOULFORCE]

Sounds like it needs a little tuning! Good luck, thanks for watching!!!

[@jimawhitaker]

Loved the video thanks :-)

[@DJSOULFORCE]

Thank you for watching and the feedback!!!

[@theotherside7634]

Nice man cave bra, greenin on all you're toys.

[@DJSOULFORCE]

Thanks for watching bro! Happy flying!!!

[@réveil-toi]

beginner beginner beginner! everyone makes videos saying perfect model for beginners, but beginners do not know how to connect a radio and do not know how to set the quad with beta flight or configured the radio! it becomes boring

[@DJSOULFORCE]

I agree with you, which is why I never said this is perfect for beginners. Beginners usually don't buy racers! Thanks for watching and your feedback!!!

[@daveday5507]

Your cat couldn't care less.

[@pskoen]

You say at the very beginning that you're not going to review it, then proceed to spend the entire video reviewing, flying. What don't you do? Explain how to get it off the ground.But don't worry, youre in good company. I can't find a single video that starts with the drone on a flat surface and goes step by step, press this, do that. My RTF package arrived 3 days ago and i still haven't flown it because I can't figure out .. is it armed? why aren't the props moving? what do the lights mean? Grrrr!!!

[@DJSOULFORCE]

Wishing I could help you but, I never got the RTF version, I'm not familiar with that transmitter, and this video was made for the guys who were having problems with their BNF versions. (what I said was that "I'm not going to re-review it" because there's lot's of videos on KZbin already!!!) Your's probably won't arm because of a setting in BetaFlight software, as I discussed and explained in this video. CLICK HERE - 9:12 Good luck & happy flying!!!