Why you start from the chuck going into tge tail stock? Does that make it hold its tolerance better.
@85CEKR3 жыл бұрын
It's Sandvik prime turning tooling, that's part of what they are showing here, it's designed to cut that way
@dle73587 жыл бұрын
Yes, please give the material, turning parameters & dimensions of workpiece
@EMECMachineToolsInc6 жыл бұрын
Hi Denis, Please see below additional information on this demo. Thanks! Material was 4140 Raw bar stock was 2.75” diameter and 14” long Rough Cutting speed - 800 SFM Rough Cutting feed - 0.040” PER REV Semi finish Cutting speed - 1000 SFM Semi finish Cutting feed - 0.030” PER REV Finish Cutting speed - 1200 SFM Finish Cutting feed - 0.012” PER REV
@dle73586 жыл бұрын
EMEC Machine Tools Inc Thank you for the Cutting Parameters. What about the plunging depth?
@EMECMachineToolsInc6 жыл бұрын
Hi Denis, The plunging depth is 0.075” radially.
@christophercolumbus89442 жыл бұрын
@@EMECMachineToolsInc troll video your programmer is a moron
@christophercolumbus89442 жыл бұрын
what are you doing?
@klafilin40614 жыл бұрын
Обратное точение... я иногда его использую когда нужно расточить очень глубокие отверстия.
@mixanourgeiozervas4 жыл бұрын
Only love........
@mohdnoraliff33644 жыл бұрын
M8 on coolant . M9 off coolant . maybe it use carbide insert for OD operation . and this process is name Backturn process . because it not starting from tailstock to jaws , but starting at jaws to tailstock .
@piter_sk3 жыл бұрын
Yeah, showing inserts/tools/cutting process with M08 :D What would we see? They´re presenting this method mate, so M09