Рет қаралды 133
Security system disarm via emergency override.
If we’ve installed an aftermarket security system including alarm & engine immobilisation to your vehicle which relies on either your OE manufacturers vehicle remote control or one of our ‘driver recognition cards’ to disarm, there may be a time where in the event of loss or failure of either of the aforementioned you need to disarm the system via the emergency override PIN code procedure.
Each system has its own unique 4 digit PIN code which at the time of installation we can customise to your own preferred memorable number if required.
Each system also has an ‘emergency override panel’ which your Autosparx installation technician will reveal to you at the time of handover after any installation.
The emergency override panel incorporates both a visual status red LED next to a small button.
Entering your own PIN code via the button & corresponding LED flashes, the system will disarm on entry of the last digit allowing the vehicle to be started if engine immobilisation is included within your system’s initial specification.
Don’t worry if you enter an incorrect digit, just enter again… the system will disarm once the last digit in the system’s pre programmed PIN number sequence has been entered.
New help with your security system?
Call 03300100506