Emlid Troubleshooting Guide | Blank Status Screen / No FIX with Emlid RS2 or RS3 as a Network Rover

[@rossco0202]

I’ve been noticing issues like these with my RS2 when hot spotting to my rover and the rover and base are over LORA. Open field but some obstacles blocking direct LOS between the rover and base, rover struggles to maintain connection even with 37 satalites in view.

[@e38surveysolutions59]

That sounds like it could be rooted in radio wave interference. You could use a spectrum analyzer to look at congestion on or around the frequency you're running your receivers on. Once you're out of LOS the obstructions between your base and rover can greatly affect your range especially since the Emlid radios are only outputting at .1W. If you have an RS3 rover you could use an external radio outputting in 450MHz Trimtalk to boost your range, but the environment will greatly affect your radio waves either way: kzbin.info/www/bejne/haibgX6rlptql5Y