Configuring Emlid Reach as a Hardwired Permanent Base

This video walks through connecting your Emlid Reach (RS2, RS2+, RS3, M2) to Emlid Caster using only a usb cable or RS-232 (or both) and the SNIP (simple NTRIP caster) software. This allows you to establish a stable connection to the internet with your base using the ethernet connection of your PC.
The example in this video uses an RS2+ connected to our PC's USB Gen 3.2 2x2 port to provide the data stream and power to the receiver. Similar configurations are possible using the EXT port of the RS2/RS3 if you don't have an available PC with a suitable USB port.
• Configuring an NTRIP B...
• Using the Upgraded OPU...
e38surveysolut...