[EN] Watch and Work - VW Lupo 1.4 16 V

[@motsamaisibisi833]

Thank you much... I like how you explain every step thoroughly... please keep posting

[@mukhtarusta317]

Thanks for the nice and helppfull videos From Afghanistan

[@SuperNova-Steve]

Great Video

[@Mantra98]

Great series!

[@geralddamien4887]

instablaster...

[@juliusakaehomen2094]

Thanks 2 you.

[@evieemaya88]

Can anyone answer, what to do at 2:39, if your timing tools will not go into the locking holes, seems my old timing belt has stretched and the timing is out alittle? How do I put it back in time?

[@ContinentalAftermarket]

Hello Arts&Trust TDC 1st cyl. Determine by means of a screwdriver, remove the 1st cylinder spark plug and insert a screwdriver into the spark plug bore. Turn the engine until the screwdriver reaches the highest point. Now adjust all markings on the engine as described and pin them with the tool. Best regards, your Continental Aftermarket Team

[@jamiewilliams1287]

On a 2004 lupo gti what is the original belt that it came out of the factory with ?.

[@jeffhector1569]

Got the same engine but is it normal sucking air from oil filler cam

[@clintbalzan8926]

Great video. Can you use suitable size drill bits instead of the locking tools for the pulleys?

[@ronycool1999]

Yep you can. Just make sure they're around the same size as the locking hole.

[@ousmansanneh7095]

I love this

[@CarlosRodriguez-sm4lo]

En español

[@johnparson700]

Very impressive

[@preetsembhi1465]

❤

[@vusisambo7389]

Thank to boss

[@ContinentalAftermarket]

Glad you enjoyed the video!

[@skajijul9836]

Nice

[@ContinentalAftermarket]

thank you :)

[@paxmkn5340]

Hello is it possible for it to bend the valves when its cat the Balt when the engine is raning ??

[@ContinentalAftermarket]

Hello, I woulld really like to help you, can you please repeat the question? Best Regards Stefan

[@michaelwilson9827]

Hi, I think he is saying will the pistons bend or contact the valves if the belt breaks with the engine running?

[@CarlosRodriguez-sm4lo]

Puesta a punto para el Ibiza 1400 motor CGG 2015 17 del 12

[@ВладимирМироненко-з9ь]

Vielen Dank

[@ContinentalAftermarket]

Sehr gern. 😊

[@nghifimuledavid7315]

I would like to know how to install the crank position plate polo 1.4

[@ContinentalAftermarket]

The crankshaft sprocket can only be installed in one position! Fits only once. On the sprocket behind it there is a cam on the front side which must match a hole on the crankshaft pulley. In addition, there is a marking on the timing belt cover, this marking must be aligned with a notch on the edge of the crankshaft pulley. You can also find the instruction in the PIC.

[@vanystuart551]

Timingbelt kit same as 1.6 16v bcb engine code

[@ContinentalAftermarket]

Please excuse. Could you please write your question in more detail? Otherwise, we can't help you with your question.