This is exactly all the information I was looking for!!!! A huge thank you for your explanations. I was struggling with the D16 mode of my Taranis XQ7 which binds very poorly with Mobula 7, and I couldn't understand why I only had D16 and ACCESS available..
@WhirlyBloke7 ай бұрын
You're very welcome!
@Toshy123 жыл бұрын
That works perfectly for me! Thank you very much! The only thing is that I had to turn my Taranis ON to flash it and not off. And it worked. 👍
@WhirlyBloke3 жыл бұрын
Good job!
@stevelooong4 жыл бұрын
thank you so much, also works perfectly with taranis qx7 :) life saver!
@WhirlyBloke4 жыл бұрын
Glad it helped!
@geefpv48593 жыл бұрын
Thank you so much for doing this video. I've been going crazy trying to bind to my whoops 👍
@WhirlyBloke3 жыл бұрын
Glad it helped.
@dorelcodrutpatrasca29935 жыл бұрын
The best of the best, all this staff I learn myself the hard way but you point very well the upgrade with the radio off, tick off the en, and copy the data via a sd-card adapter
@lakeness19794 жыл бұрын
Thanks very much. Shouldn't really be such a massive sense of achievement just from getting that blasted receiver to talk to my transmitter, but this calls for a celebratory cup of tea.
@WhirlyBloke4 жыл бұрын
And biscuits. Good job.
@paulg54374 жыл бұрын
This solution does beg another question: while it's possible to re-select D8 in an OpenTX non-EU firmware (which is the international FCC mode); what mode does the internal TX module need to be in (FCC or EU-Lbt)? There appears to be 3 flavours of TX firmware (FCC, Early EU and EU-LBT). Not being sure of compatibility issues, I opted for EU-LBT in OpenTX and the TX module of my X9D and bought a plugin multi-protocol module from Banggood. This gives me D8 on the module plus a raft of other protocols notably DMS2/DMSX. Hope you find this helpful.
@parlundqvist16702 жыл бұрын
Thanks for a good instruction - but - managed to bind but when I go to RSSI I get the information no RSSI data? Is there anything else I missed or had to do?
@WildpixFPV3 жыл бұрын
Hey there, thanks for the video! I have the taranis X9D+ SE 2019 .. It now has its own version in the "Settings" dropdown list. But there is NO eu or luac to click! or better, to not click haha.. Difficult one, because it only has D16 mode.. No way to fly whoop boards without soldering own rx.. :/ Any ideas?
@komlanfolly1224 жыл бұрын
hello I have been delivered in France a radio and receiver R9 AND R9M LONG MODULE WEAR in fcc non EU (europ) I can not make the connection I do not understand and in addition I have to change the firmwar of all, I must change the radio receiver and module? thank you
@user-mo4ul5td2p8 ай бұрын
The eu option in not available on the x9d plus se 2019 firmware so no more D8 activation possible ???? i would like to avoid external Xjt usage
@WhirlyBloke8 ай бұрын
That's cos FrSky have dropped support for many of their legacy transmitters and receivers. I used to be a big fan of their gear, but not any longer. 😒
@fredheimer3 жыл бұрын
helpfull video. do you think it will also work with the newer Taranis X9D+ 2019 ACCESS transmitter in LBT Version ? What is to do to bind it with older R8 pro Receiver
@WhirlyBloke3 жыл бұрын
No idea. I've steered clear of Access for the moment.
@Tjup3 жыл бұрын
ANNNNNd why did u end video in D16 mode?
@Didi-dd7xt2 жыл бұрын
Hi Nice video. I have Horus X10, could you advise how to enable D16 mode. ( currently my radio is set to D8). Thanks look forward to your advices
@WhirlyBloke2 жыл бұрын
Sorry I don't have any experience with the Horus X10.
@Didi-dd7xt2 жыл бұрын
Ok no problem
@NeophytosY4 ай бұрын
I really need help, there is no luac option
@johanneshendrikrenebuitenh55423 жыл бұрын
Hi, finally after 2 years I use this trick in order to fly with D8 protocol. One thing is unclear to me. At 6:56 you copy those SD files on de SD card. And I presume you insert this in the taranis. What do I need to do after with these files that are on the SD card? Is the taranis automatically using this content or do I need to set it up in the taranis menu?
@WhirlyBloke3 жыл бұрын
Just copy them onto the SD card, over writing the existing ones and put it back in the radio. You don't need to do anything else cos the radio uses whatever is needs.
@johanneshendrikrenebuitenh55423 жыл бұрын
@@WhirlyBloke thanks a lot for the reaction. So in the meanwhile I was able to bind and fly in D8 mode without a sd in the radio! Now I also will put in the sd incl. your recommended files.
@bionic36047 ай бұрын
I still can't see D8 mode ! i don't know why its killing me - i downloaded the firmware and the corresponding SD card info and i dunno why its never there !!
@WhirlyBloke6 ай бұрын
I've never had a problem, but TBH since FrSky went down hill, I haven't touched a Taranis for about 5 years.
@chriscflint4 жыл бұрын
Regret this does not work on the Taranis X9D Plus 2019 version.
@WhirlyBloke4 жыл бұрын
It works on my x9D plus.
@MrBEEFCAKE265 жыл бұрын
I need d16 non eu for tiny whoop ? Do you have a video to flash XJT module it’s been driving me mad want to fly my tbs tiny whoop
@geoffrayATLAN4 жыл бұрын
Hi, Thanks for your video !! I have issues. If I let the radio turned on, it doesnt work, if its off, companions doesnt recognized it ...
@WhirlyBloke4 жыл бұрын
No idea.
@Bigginger615 жыл бұрын
Thanks that was really helpful.
@aymanbabaRS64 жыл бұрын
Great video thanks. I have the 2019 vesion EU-LBT will this proceedure work? In radio type can i choose XD9+ (and not the "XD9+ 2019")?
@WhirlyBloke4 жыл бұрын
Either should work, but it's best to back up your transmitter configuration first so you can easily roll back if something doesn't work.
@user-mo4ul5td2p8 ай бұрын
@@WhirlyBloke not luck option eu is not present on compilation list for 2019 version
@AlgorhythmKid4 жыл бұрын
Didn't work. I'm using the Q7s would that have anything to do with it??? I selected the correct model etc in OpenTX. Am I alone in the fact that NOTHING ever works. I literally spend 99% of my time troubleshooting. It's starting to get a bit old now. I'm seriously considering selling up
@WhirlyBloke4 жыл бұрын
That's the challenge and fun of FPV and quads. There's always something to learn. 😉
@AlgorhythmKid4 жыл бұрын
@@WhirlyBloke Unfortunately, my spare time is extremely precious. With family and a very demanding business schedule, sitting staring at blogs, tutorials and youtube videos for hours on end during my limited free time, is not much fun anymore. Especially when it's over something as ridiculous as making my TX say the letters D8 on my internal RF! Maybe soon something will click, but at the moment I just spend my time in a perpetual cycle of confusion and WTF moments as new issues arise after fixing one problem to another.
@bt46703 жыл бұрын
@@AlgorhythmKid Hey, are you using the old ACCST or newer ACCESS transmitter?
@webevision4 жыл бұрын
Hi, I'm trying to convert my Taranis X9 lite, but when I get to flashing the FW it comes up with this 'Filter on vendor = 0x0483 product = 0xdf11 Opening DFU capable USB device... Cannot open device' Any ideas what's happening? Great video by the way.
@WhirlyBloke4 жыл бұрын
Sounds like you've got the wrong (or no) DFU drivers installed. Painless360's excellent video explains all kzbin.info/www/bejne/jaG8gGp-oM-rfbM
@mamoshimamoshian90784 жыл бұрын
What You show here does not work I am affraid to admit. I love your channel and have learned alot from you, Is there a new method that you might know how to flash this ff.....radio so I can get it to work with my models :) thank you
@WhirlyBloke4 жыл бұрын
This has worked for me and according to the comments, lots of others. It maybe you have a different configuration/version of firmware or OpenTX. Let me know if you find out.
@williamgrindlay7073 жыл бұрын
Hey man, I'm having trouble getting this to write to my x9 lite, getting the message (could not check firmware from radio) really new to fpv and I'm struggling big time to get in the air, anyone able to help a new guy out please.
@bogumilmazur14 жыл бұрын
Hi, I done this but now my transmiter shows XJT-D8 and XJT-D16 and it won't bind. How can make it to show only D8?
@WhirlyBloke4 жыл бұрын
This sounds like it may be an incompatibility issue with the XJT Module.
@bogumilmazur14 жыл бұрын
@@WhirlyBloke Thanks for answer. I found taht I have to flash inner frsky module to non ue version too. I have done that by SD card. After that it works.
@WhirlyBloke4 жыл бұрын
@@bogumilmazur1 Great you've got it sorted. Useful info.
@dianaboshuizen94092 жыл бұрын
@@bogumilmazur1 hi i have the same problem but i dont understand what i must flash can you please tell me so i can understand what i must do thank you so
@MrSabram074 жыл бұрын
What do you mean by lay SD card files over the new SD card files?
@WhirlyBloke4 жыл бұрын
Just copy them over the top of the old ones.
@navldn4 жыл бұрын
Can I do this to the X9 Lite and bind it to a D8 receiver such as the TinyHawk 2 ? Thanks
@WhirlyBloke4 жыл бұрын
I don't have an X9 lite to try it on, but I see no reason why not. Remember to back up your TX before you make any changes, so you can put it back how it was if you need to.
@kristijonasgrigonis53864 жыл бұрын
Nav Singh, any luck? Did it work?
@AeroTesting4 жыл бұрын
i have made all this and update x8r i can't bind can you make video how fix X8R bind
@WhirlyBloke4 жыл бұрын
Sorry I don't have an X8R.
@bobedibob30844 жыл бұрын
i have an eu lbt x-lite without sd card, can i still do this?
@MarcoLissandrello4 жыл бұрын
may the last Taranis models have the blocked firmware and than not possible to switch from EU to non-EU or hacking maybe. I can't to do anyway... maybe someone can do
@sams07483 жыл бұрын
If I buy a non lbt transmitter will it still work in uk, and will be fine because banggood have all non lbt recievers. Thanks
@WhirlyBloke3 жыл бұрын
Yes it'll work a long as the tx and rx are both the same. Location makes no difference, its just about what's legal.
@sams07483 жыл бұрын
@@WhirlyBloke so would it be legal? Or is it illegal to use a non-lbt transmitter in uk
@WhirlyBloke3 жыл бұрын
@@sams0748 Not really legal, but loads do it. Very hard to police this sort of thing.
@richardlong36154 жыл бұрын
You forgot to update the boot loader
@beechFPV4 жыл бұрын
Will it still remember all the previous models and still bind to them?
@WhirlyBloke4 жыл бұрын
Yep
@beechFPV4 жыл бұрын
Brilliant. Have done it already and am glad to be able to work my d8 recievers again.
Does this also work with the 2019 se model? Also eu lbt
@WhirlyBloke4 жыл бұрын
Yes it does.
@M.L.R.Z.4 жыл бұрын
Thanks for the fast reply!
@mrnevin88able4 жыл бұрын
Anyone know if this works with the x7 model?
@WhirlyBloke4 жыл бұрын
Yes it does.
@komlanfolly1224 жыл бұрын
my radio is taranis x9D PLUS SE 2019
@ABBO-30004 жыл бұрын
i have x9 lite so it is running their new access firmware...does this mean i cannot get d8 mode ?
@WhirlyBloke4 жыл бұрын
Correct D8 isn't available. FrSky are shooting themselves in the foot.
@MantraAerials4 жыл бұрын
@@WhirlyBloke Same case with the X7 access
@Raziel1989PL3 жыл бұрын
@@WhirlyBloke So am I correct that with QX7 Access this tutorial won't work ? I did this as in Your wideo, and I still don't have D8 option :(
@WhirlyBloke3 жыл бұрын
@@Raziel1989PL Correct. Access is awful.
@Raziel1989PL3 жыл бұрын
@@WhirlyBloke I finally did it :D But I needed to change in betaflight FRSKY_X to FRSKY_X_LBT and it's working for me on mode "Access". I fly at home, it's ok, I have to try somewhere outside on bigger distances ):
@Cumbrian_mandalorian4 жыл бұрын
followed this step by step and dosnt work. got the exact same radio as the video
@WhirlyBloke4 жыл бұрын
Make sure you've got the latest version of Open TX. 2.3.4
@Cumbrian_mandalorian4 жыл бұрын
@@WhirlyBloke yeah I have the latest version. No joy.
@fpvnme48455 жыл бұрын
much appreciated lots forget about this kind of information and spend hours doing things wrong bound to help a lot of people well don't Sir
@mamoshimamoshian90784 жыл бұрын
Did this work for you!!!? I have upgraded also the internal modul too is that why mine does not work? I am just lost....:(
@MrSabram074 жыл бұрын
Omg that's incredibly confusing
@WhirlyBloke4 жыл бұрын
That's FrSky for you.
@MrSabram074 жыл бұрын
@@WhirlyBloke no I was told I cannot go back to D8 mode has to do with the type of antenna or something. What do you think of that? And thank you for any help you forgive me
@WhirlyBloke4 жыл бұрын
@@MrSabram07 It's purely a firmware thing, so nothing to do with the antenna.
@MrSabram074 жыл бұрын
@@WhirlyBloke maybe I'm wrong about antenna but does it have something to do with the hardware like the module inside or something?
@eisenreiter93913 жыл бұрын
You lucky guy, you are no longer in the EU. Therefore you dont need to use this shitty EU-LBT anymore....😁😁