I have a spray-type Kitchen Faucet that I was trying to connect to my Kangen 8 machine. I have been to Ace Hardware and then from there to two Plumbing Suppliers in my area with my Kangen parts for connecting to the faucet hose tip (male end) and have been told that I am not able to connect the spray-type hose end to the diverter and need to replace faucet with a non-sprayer type faucet and then it can work! Is this true? I’m willing to do this to get where I can use my Kangen 8 but wanted to ask before I go out and purchase a new faucet and have to have it installed! Please advise…
@YourKangenWaterGuy10 ай бұрын
Please take a look at the video link below, I speak about a sprayer type tap adapter: kzbin.info/www/bejne/nmO9f4GVfMiqlbcsi=J3oxIlAEy4HxcmhV
@alitootian87604 жыл бұрын
Hi, I need my Kangen water machine to sit on the countertop, but I do not like to have the converter at the tip of the faucet. I like to have a double-faucet with one fo Kangen water ad the other one with acidic water to be installed completely separated from the original faucet. Any recommendation?
@YourKangenWaterGuy4 жыл бұрын
Hi Ali, go to www.6atools.com and use the discount code... Ball ... to receive 5% off.
@howardcontois28162 жыл бұрын
Is there a workaround for hooking an Enagic machine with a pull-down faucet?
@YourKangenWaterGuy2 жыл бұрын
Hi Howard, take a look at my other installation video as I talk about that type of tap/faucet. kzbin.info/www/bejne/nmO9f4GVfMiqlbc
@Angela-w5p10 ай бұрын
Hi, can I connect direct to the cold water feed? Cheers
@YourKangenWaterGuy10 ай бұрын
You can do so via a water spout as there must be an ‘on / off valve’
@krishnjarvis2203 жыл бұрын
Hi, I am having difficulty with the adapters. Non of them fit my tap. I like what you have done to yours, I feel that’s what I need. Could you guide me as to what I need to buy. Many thanks 🙏🏻
@YourKangenWaterGuy3 жыл бұрын
Hi Krishn, go to www.6atools.com and use the discount code... Ball ... to receive 5% off. There you'll find the rubber adapter for sliding over the tap.
@pennymccullagh16919 ай бұрын
Do you ship to Australia?
@jleight95443 жыл бұрын
What about the electrolysis solution? You didn’t mention anything about that
@YourKangenWaterGuy3 жыл бұрын
Thanks for your feedback, J. You're right, I didn't cover the electrolysis enhancer, and I never went through the different types of waters either as they don't need to be explained in a video that is about 'installing' the K8. The focus was to help people understand how to connect it to their tap and run the water. There are instructions in the manual explaining how to put the enhancer in although as it's simply pour a container of 'electrolysis enhancer' into the container and then put it in place, I don't 'really' see the importance for it in this video.
@jleight95443 жыл бұрын
@@YourKangenWaterGuy i think most people who are looking for install video are wanting to understand how to set it up correctly. I got my k8 today and installed it from a KZbin video because the install manual is not very fluid. I started looking for multiple videos to verify i Installed it correctly because my water doesn’t taste like the kangen 9.5 i was getting from my friend.
@YourKangenWaterGuy3 жыл бұрын
@@jleight9544 I understand your point, J and just to clarify, the electrolysis enhancer has nothing to do any of the waters other than the cleaning waters, 2.5 and 11.5. Also, Enagic® used to have a different enhancer tank for the K8 than they provide today. Unfortunately, that leaked, so they improved it with a new version and at the time of filming this video, I had the old tank. So, I performed a new video about the enhancer tank here... That video is 'recommended' at the end of this video. I have faith that helps. kzbin.info/www/bejne/nJTXlXeDar53jNU
@YourKangenWaterGuy3 жыл бұрын
@@jleight9544 also, you mentioned your water not tasting the same as what you were provided. There are numerous reasons for that, including your source water (believe it or not, even in the same area it can taste different), flow rate, pre-filtration. I expand on this via the via here: kzbin.info/www/bejne/p3WreqFubNiGn80
@jleight95443 жыл бұрын
@@YourKangenWaterGuy excellent thank you 😊 i do appreciate your content 🙌
@TreyOconnorCrystalBallerz6 ай бұрын
show us how to add the ingredients there's enough of you people posting up the setup
@YourKangenWaterGuy6 ай бұрын
What ingredients?… At least ask politely and with clarity… ‘please’ goes a long way. 👌