Enclosed Dirt Bike Trailer Build Tour!

[@justinwetzel9816]

Very clean layout. Really enjoyed the detailed walkthrough. You did a fantastic job. Gave me some good ideas for my enclosed trailer. Really like the white paint on the walls, brightens the whole interior up! Mini dream garage :)

[@Myksgarage]

Yes! This was a fun project! Thanks for watching

[@jamesal0]

just move the front e-track half as close again to the wall and the bikes will stay put without other tiedowns. Nice setup and trailer 🙂

[@Myksgarage]

Thanks for watching!

[@davidkettlewell5643]

yep EZ Chocks are the way to go !!! they have now drop plates for little bikes . its the best system out there nice video thanks

[@Myksgarage]

Thanks for the feedback!

[@randallalbrechtii5884]

Very nice set-up...... What we are doing in ours is putting the e tracks under the foot pegs and securing the bike that way. No need for straps. Just 2 turn buckles from the pegs to the floor. Wont move or hop in any direction.

[@Myksgarage]

That's a good idea! Thanks for watching

[@liveinbarrieontario]

Outstanding job on the video. Impressed with your considerations for the trailer 👍🏼

[@Myksgarage]

Thank you!

[@channelj3135]

Very well planned and executed. Highly functional. Great job.

[@Myksgarage]

Thanks Brother! Excited to get out there and use it!!

[@ChrisKTMKurtz]

Outstanding job! One of the best I've ever seen. Thanks for sharing.

[@Myksgarage]

Thanks for your positive comment!

[@thibodeau6229]

Very well done. Great ideas! Thank you

[@Myksgarage]

👍

[@Joez86]

Great Set-up!

[@Myksgarage]

Thanks for watching!

[@jonarelt4072]

Just a thought…Instead of taking the straps from the handlebars to the floor, what if you went to the e-track on the wall? That would pull the bike into the wheel chuck securing it pretty well I would think….? I really like the setup though!!

[@Myksgarage]

Good suggestion, I’ve tried this and it seems to work well. Thanks for watching

[@800tundra]

Have similar setup. For tying bikes. Have another set of tracks near pegs and use e tracks to foot pegs. As I don’t trust the track pulling to much on wall studs

[@treavorgerber2917]

Im sitting here thinkin, "Whats keepin a guy from drilling slots in the wheel chock sides to anchor to the wheel chock and eliminate the need for the e track ring accessories on the front half

[@NateSmith-c7n]

I do that with mine but screws have pulled out multiple times.

[@someoneyouknow96]

Hook the bike from the pegs to the wall e trak. That way the suspension isn’t compressed hardly at all.

[@Myksgarage]

Yeah that's good idea!

[@esteslandscaping6947]

My truck just needed a fuse to have the trailer light work when it’s not hooked up. It sounds weird but without that fuse it wasn’t charging the battery that’s on the trailer. It was like a $15 part.

[@Myksgarage]

Interesting 🤔

[@kenscoots8177]

Great layout, very neat! 🙂

[@Myksgarage]

Thanks, it has worked out very well!

[@onespeed4817]

Nice setup 💪🏼

[@Myksgarage]

Thanks for watching

[@robr4596]

Wow! you are a very innovative man! Cool trailer, and I'm really impressed. thanks for sharing it, I'll be using your idea's for my trailer mods.

[@Myksgarage]

Very nice!

[@dannyrowatt]

Excellent. Thank you for sharing!

[@Myksgarage]

Thanks for watching

[@NyteOwl]

Yo! Where did you get the wheel chocks for the ez track system?

[@Myksgarage]

www.motoprohq.com/

[@NyteOwl]

@@Myksgarage Thanks so much!

[@ddrowdy7666]

Looks real nice but I am not in love with the angle of the strap on the right side of the bike. It isn't applying much forward force to keep it against the chock. Has it been working ok?

[@Myksgarage]

I've Modified it. I installed a row of e track closer to the wall

[@ddrowdy7666]

@@Myksgarage I suspected you might have done that, good idea.

[@NateSmith-c7n]

@@Myksgaragehow close to the wall? Have you found it works better?

[@andrewcurtis2605]

Thanks so much for this! I’ve got a smaller trailer and was struggling with figuring out how to secure multiple bikes. I just got the e track system but haven’t installed anything yet. I didn’t know about the wheel chucks for e track. Just ordered some and I’m going to copy your design 😂. Thanks again!!

[@Myksgarage]

That's cool, good luck with your build!

[@KentBaum]

Now that it’s been a year…. How has the floor held up? Would you do it again?

[@Myksgarage]

Here's my update video: kzbin.info/www/bejne/iXasaHlnr8-jraM

[@justinjames5750]

What did you put on the trailer tongue coating wise to cover the rock chips

[@Myksgarage]

It was just a bedliner material like this amzn.to/3NRKDIH

[@justinjames5750]

@@Myksgarage thanks for the information

[@PileofBrass]

Great looking set-up. With your floor mount E-Trak did you screw them into the plywood floor with wood screws or are the bolted in with a backer plate underneath ? Thanks.

[@Myksgarage]

I just screwed them into the metal cross beams

[@duncan909]

I see you have several rock chips at the front of the trailer, and I wanted to ask were those already there when you bought it? I noticed you have mud guards on your truck, as do I and I’m trying to figure out whether my mud guards will protect the trailer from rock chips.

[@Myksgarage]

Yeah those were already there

[@mega-hb4re]

Are you planning a camper conversion later? You got the space and it won’t take spaces from your bikes.

[@Myksgarage]

I’m not planning a camper conversion, but it’s nice to know I can if needed.

[@cesaralvarez8443]

Nice trailer set up, did you noticed any cracking on the epoxy floor when you drilled holes or screw in the bolts for the e tracks?

[@Myksgarage]

No I didn’t, epoxy held up just fine. Thanks for watching

[@AudreeRose]

Do you have a link for the bed liner coating?

[@Myksgarage]

Yes, here is the one I used: amzn.to/42B7vSN

[@bssmith1220]

Do you have a link to the craftsman tool box you used? Also, is the countertop plywood under the peel and stick tile?

[@Myksgarage]

Yes just a piece of plywood, for the workbench top

[@michaelvitucci6188]

Where did you purchase the Etrack? I like the black.

[@Myksgarage]

Thanks for watching, I got the etrack from this seller on Amazon: amzn.to/40rPbcQ

[@NateSmith-c7n]

I’ve got E track on the wall with the wheel chocks and run my straps to it. I’ve been running into problems with the screws pulling out, even the ones in the studs. Have you dealt with this?

[@Myksgarage]

I haven't had that problem

[@kevinemde7554]

How high off the trailer floor is your bottom e-track with the wheel chocks?

[@Myksgarage]

About 14.5” to the middle of the E-track

[@michaelvitucci6188]

Great job!!

[@Myksgarage]

👍

[@jasonlakomiak179]

Great setup! We are looking to do the same and tow it behind our motorhome. Could you have used a 6x12 trailer and still fit the bikes on an angle?

[@Myksgarage]

Yes 6x12 would have worked as well

[@StoneStraiff]

What type of flooring is that? I wanna do the same to my trailer

[@Myksgarage]

It's an epoxy, here's a link: amzn.to/3G0k9RA

[@StoneStraiff]

​@@Myksgarage appreciate it bro

[@insideoutadam]

Nice set up, bookmarked this to mod my snowmobile trailer. Epoxy floor is great, how is it holding up on the wood?

[@Myksgarage]

After a year, it's still perfect. It cleans up very easily!

[@williamcox7190]

How many full size bikes do you think you could fit in there?

[@Myksgarage]

8-10

[@justincota5002]

What is the distance between the E-track, Center to center. Im looking ordering a trailer and looking to trailer two bikes in the center.

[@Myksgarage]

I would put the e track as close to the wall as possible

[@Patrick21684]

Great job.

[@Myksgarage]

Thanks!

[@dirtbikeroo]

How is the workbench mounted/framed on the bottom?

[@Myksgarage]

For the tool cabinet I just took 2x6 boards and mounted them on the sides to the bottom of the cabinet in a square.

[@supermantucker]

What length of e track did you put in? How far from the wall did you go on the floor?

[@Myksgarage]

I did 5' lengths of Etrax on the floor about 7" from the wall

[@tylepicier726]

Do the epoxy chips come off or feel like they aren’t into the epoxy coat? I just did this, 12 hours later the chips come off. I did an epoxy coat about as thick as I would for paint on a wall. Was it not thick enough? Does it just take more than 12 hours?

[@Myksgarage]

I had a clear coat over the flakes and I've had no problem with them

[@tylepicier726]

@@Myksgarage ok, so you did a clear coat on top. Good to know. How’d you apply clear coat? Roller?

[@theenduropest]

Top set up 👌

[@Myksgarage]

Thanks bro!

[@steve.newcomb]

Did you bolt the tool box down? If not how is it secured ?

[@Myksgarage]

Yes it's bolted down to a wooden base I made from 2 x 6 boards

[@ReesesGT]

How did you hang the cabinets?

[@Myksgarage]

Just screwed them into the wall studs

[@robscott4198]

Looks sweet. Good job. Do you have a link for those helmet hooks?

[@Myksgarage]

Here's the link to the hooks, amzn.to/3oTVSGW thanks for watching!

[@NateSmith-c7n]

What product did you use for the floor? How is it holding up?

[@Myksgarage]

.

[@treylepicier]

stainless counter up front... where did you get it

[@Myksgarage]

It's just plywood covered in vinyl floor tiles

[@ainurusmanov7920]

Молодец мужик🤝! Мне нравится твоя телега 👍

[@Myksgarage]

👍

[@Tr0llermen.]

Can u send me link off e traps to the wall

[@Myksgarage]

amzn.to/3Kp4BJY

[@Tr0llermen.]

@@Myksgarage thank you and ghe rails?

[@Matyx863F]

What did you use on the floor?

[@Myksgarage]

This stuff amzn.to/47Ij8tR

[@tylepicier726]

What did you do for flooring?

[@Myksgarage]

kzbin.info/www/bejne/p6HVinl3fc5gY6Msi=vPvqR_2SaAmIIwI6 Epoxy coating

[@rajvora424]

Very nice, man. What’s the cost of what you’ve done to date?

[@Myksgarage]

I haven't tracked my cost, everything was very reasonable, as I used off the shelf products and nothing custom

[@brianweston2476]

Nice trailer

[@Myksgarage]

Thanks Brian!

[@gouchmcdougal7831]

Looks good pal. Luke 9:62

[@Myksgarage]

Thank you! Amos 3:7

[@tylerf5223]

Looks great man! what floor paint/epoxy did you go with? happy with it?

[@Myksgarage]

Here is the link to the rust oleum garage floor Apoxsee kit that I used: amzn.to/3t623Yy It has held up great, I’m very happy I went this route

[@JaredTheGreaterM]

Awesome setup! Looks so clean. Where do you buy your wheels?

[@Myksgarage]

Thanks Bro, you were my inspiration!! Here is the info on the wheels: kzbin.info/www/bejne/hKrMmmxqocd8htU www.trailer-wheels.com/15x5-Black-HWT-HiSpec-Series-09-Trailer-Wheel-5-on-45-Lug-2150-lb-Max-Load_p_1304.html#.YULgTsBOK_Z

[@kevinharris145]

What lock is that on the tire??

[@Myksgarage]

The strap on the spare?

[@kevinharris145]

@@Myksgarage no on the tires of the trailer. Yellow and red one.

[@kevinharris145]

@@Myksgarage no its on the tire outside. first part of the video. Its yellow

[@SVFRacing117]

What height is the interior?

[@Myksgarage]

7 feet

[@SVFRacing117]

@@Myksgarage thanks!

[@TheRealWayneFoley]

Noice!!

[@Myksgarage]

😀

[@MrCheeks125]

Can you post a link to the wheel chocks? For the E track on the floor did you put plates on the under side of the trailer?

[@Myksgarage]

www.motoprohq.com/product-page/ez-chock?gclid=CjwKCAiA6seQBhAfEiwAvPqu1wKo2pm8FJuRwICQsKTuUxaUPoE28zNhTqFRE-VPuXHMuc1maFTvJxoCJVkQAvD_BwE

[@jonathanjerman9155]

What size is your trailer?

[@Myksgarage]

7x16

[@jamesc6137]

Out of curiosity why would you be hauling 7 bikes? Your friends all drive smart cars? lol. Great setup

[@Myksgarage]

I have 5 bikes, and it's possible I could pick up a few more so I might need that capacity

[@thecryptotengu]

good content

[@Myksgarage]

Thanks for watching!

[@livnsouthflorida]

Niceee

[@Myksgarage]

👍

[@sabccr135]

Super nice trailer man. Set up great but that bike bogus, bro. I expected atleast a 250f. Trade that thing in.

[@Myksgarage]

Yeah

[@guigaslop]

Really??? Only for ttr ?? 😂

[@Myksgarage]

🤷

[@Myksgarage]

Get your Pro Taper Tie Downs here: amzn.to/3z8d76N Noco Wall Plug: amzn.to/3Mhns9d Noco Onboard charger: amzn.to/3NmvDBu Thanks for watching, Please considering subscribing!

[@NateSmith-c7n]

What product did you use for the floor? How is it holding up?

[@Myksgarage]

Here's a link to the video kzbin.info/www/bejne/p6HVinl3fc5gY6M Holding up great