ENDLESS FRAMES REVIEW // THE BEST 3 & 4 WHEELS FREESKATING FRAMES

[@jrapp654]

I talked to Brad for some customer support and he was MAD helpful and super quick to respond. Best customer support I've come across in this community

[@erza75]

The edit in the beginning was Very good. Great music, great skating

[@christopherw3616]

You know when an endorsement comes from Lino it means something! I can also attest to Brad's (owner of Endless) customer service skills. He is very responsive and totally committed to giving his customers the best customer service. A+

[@shroomzys]

I wanna hear more about what that 4x90 famus wheels setup is like to skate

[@VandKoala]

I put 72/60 on oysi frames. They are FAST :) Wanna try 4x90 as well!

[@alenges5839]

I got my 84‘s two weeks ago from your shop. And i love them! They are so fun to skate. Thank you for the good support and the great work you are doing whit your channel and shop!

[@SkateswithAlex]

ola Ricardo , i recently bought the Oxelo mf500 as i was transition from hoquei patins to inline, Now im looking to upgraded to a new frames for better tour city ride, i want more speed with better rolling than the stocks frames that came with , i heard about rocking 490 frames and this endless 90 frames so if don't mind please can yiou give me a feedback and suggestions on this matter. appreciated tks Alex

[@jasonbooth8672]

Thanks for the review Ricardo! Love mine. I received these 2 weeks ago. I love riding 90's but I decided to buy the 80/84/100 (I am 5'9 size 43). I was not let down by this combo. Turing is smooth, riding is even smoother. Even with the slight rocker I have great control. FR1 (white) /80/MM with the street invader wheels.

[@Dcfinest79]

Ricardo to fit those 125s on those boots you could have bought some thick washers to put in between the boot and frame where the screws are to give you a little more clearance to fit those wheels on there.Just future reference to anyone looking to do the same.

[@RM-en9gk]

But you will be higher off the ground wish means unstability

[@PdroMatos]

Você envia para o Brasil?

[@RM-en9gk]

I was able to fit 125 on a FR1. I had to grind the plastic on the boot just the middle by 2mm

[@brandonbrush1927]

How was this process? I have Endless 100s on the way right now, but I see the new Endless RB100s might be able to fit 125s on the FR without modification. I’m debating waiting for that product instead, but if modding the boot was pretty painless I might try that instead. Did you just dremel down the middle? Is the plastic still holding up well 5 months later? I haven’t modded my skates before, and I’m worried about messing with the security and stability of the boot

[@liudizzle]

I settled on the 90, I'm a size 10 but only 130lb so I was worried that the 100 would feel too long for me. The 90 is so fast and agile, it can get a little twitchy when carving at high speeds but overall so damn fun.

[@Deathdefiant09]

Excellent review. Loving my 90s.

[@edwardtaylor5207]

Really loved the edit at the beginning, excellently shot!! I'm trying to decide between a new 3x125mm for my speed skates or the 100 endless frame for my seba highlights, the agony of choice

[@Titanic00]

Very good I'm planning on ordering one I work at the skating rink here in Jamaica question though it's good on flat surfaces ?

[@thecuriewheelerthecuriewhe2628]

The footwork from start to 1.35 is so dope Lino, can we get more of similar footwork with good music just like this 👌 👍

[@mikaelolsson1427]

Great vid! The ending was the best. They sure look good man! 😎

[@wonderpuff1809]

5:40 what wheels are those on the 4x90 setup?

[@krystalaufiero3188]

can you compare these with the NN 4x100s?

[@jrsvm]

You also have been using the NNSkates frames right? Is there a review coming?

[@Bratox187]

waiting for that 5x80mm review to!

[@giuseppealessio2343]

@@Bratox187 i want to see the nn vs endless review

[@Bratox187]

@@giuseppealessio2343 yeah me to

[@krystalaufiero3188]

I NEED to see the nn ronin 4x 100 vs endless 4x100 review

[@MrBeuller]

Love your content man! thank you for what you do, it is appreciated!

[@photomorti]

Man the skating at the beginning is a pure masterpiece!

[@grimmjonog6851]

I've got the 100s and I'm super excited to see if 125s fit on mine.

[@OrganicGonzalez]

Did the 125 mm fit? What boot? I have FR2/F7

[@LollyLover54]

I got the endless 90's. and boy do they look better than the 243 frames i had previously on my rb's. Since i have a size 13 us foot. The wheels finally sit 3-10mm out from the boot on both ends rather than 1mm front and -10-20 back. Keen to try them out later today

[@DeezSkates]

Damn KZbin! I’ve got notifications turned on for your channel and it never showed me this.. so I’m just now finding out you made a review! I love the video man, and as you know I absolutely love these frames!

[@ravenouspathogen]

I love my 100/110s on my FR1s

[@barryheath882]

I really want the 4x100s they look awesome. Wanna try some wizard moves on those.

[@Kiarabelle1]

The introduction is so sick. Amazing skills.

[@juniorfh1]

Ricardo, pensa em trazer a Micro pro Brasil ou América Latina? Gostei muito dos modelos!

[@kaiserstorm886]

Is there a video on how to install those grind plates you have on the 90mm setup?

[@wrcosik]

Nice vid ! What do you think about endless 90 es version? It is good for city cruising too?

[@dionisosweinblatt5270]

What skate Model is the one with the 90s on?

[@chriswharrier3571]

Just picked up some endless 90s, and being slightly longer frames, i can adjust slightly the front back bias. Currently, have them central. are there any benefits moving front to rear?

[@drescherjm]

I like the option of switching between 3 wheel and 4. For the trail which is mostly flat and I go for long distances (>22miles / 35km) I would want a 3 wheel but on my normal daily skate through the neighborhood (hills in all directions very little flat areas) I want 4 wheel by 80 to 90 85A or 86A. With that said I have been trying to replace my entry level rollerblade skates for 5 months now. The pandemic has made it difficult to get skates in my size for short but wide feet.

[@gwan565]

Hi... Can endless 100/110 fit on my Micro SR? 😀😀

[@CanadaBladers]

This review has gotten me seriously pondering the endless but we would like to see a comparison between the endless and the NN frame.

[@JakeyDill]

I think there is no comparison, by sheer design, the endless are lighter whilst also boasting a 2 in one design. Whilst the NN frames have cool names and Logos, I still think the Endless frame is the ideal choice out of those 2 brands.

[@JakeyDill]

@Mikael Olsson I haven't got hard evidence, but just by looking at the design, my vote would goto the endless. If you messaged endless and NN frames and asked specific weigh on say a 4x100 frame, then you'll get a definitive answer, but in all honesty, a few grames isn't going to make bugger all difference to the fun of skating.

[@SkatefreshVideos]

The review by @passiveaggressiveskater KZbin channel comparing the Endless and NN 4x90 frames goes into excellent detail about the specific difference in terms of weight, height, rocket difference by mms. It helped me understand how they both feel different from each other. It’s subtle but the NN for wizard stuff for me gave me more agility in the back to forwards Luis turns and one footed stuff. Endless more stable in the city. Again very slight. It really depends what you like doing in your skates and how you skate and where. They are both excellent products offering the 3 and 4 wheel set ups. Commend that video.

[@naveenranasinghe5578]

I wish to learn inline skate may i know as beginner what should i buy 3 wheel or 4 wheel

[@maxiweh7574]

i got the rolleblade rb 110 3wd in size 48 and it feels like i got no wheels in the back can i use ENDLESS FRAMES on that boot? and do u think it would help with that?

[@BlackyRay_Patrick]

If got the 4x90 trinity frame from endless and man. I found my true love.

[@southlann]

Will fr1 eu36 fit or good for endless 90?

[@amiuus]

Can u tell us what boots you showing in this Video?

[@diegovalencia1793]

Hi there , can you tell me what boot are you using in the 4x90...

[@tymellcoy5077]

I’ve been looking all over to get these and 110 well and I cannot find them. And I looked on your website but for some strange reason it won’t let me order it off of your website. And hopefully you see this message and you can give me more info of where to get these in a 110 size.

[@nickm133]

I have a larger foot (45) and the 4x90 ES appeals to me more than 100. You don’t have the ES in this vid?

[@tornadoofthoughts]

what's the shoe size of the boots on the video?

[@davidfarias8929]

Ricardo sou do Brasil e queria muito comprar essa base 4x100 Trinity, não tem no Brasil 😢

[@joshmontes7390]

Hello, my FR boots are 45-46, do you think the Endless 4x90 can work on them?

[@JoseOlleroFormoso]

Endless frame vs wizard frame... which is better for you?

[@gdust6579]

Can you put free skate frames on aggressive boots?

[@LollyLover54]

Im a size 13 us (47 euro) They recommend a 100 frame due to my size. However im new to skating so only have the rb 80 cruisers. They are only compatible if i drill and retap the front hole. Better to do that or just go 90

[@cbrcityrollers]

Got them today!

[@woobilicious.]

Anyone tried fitting 110's on the 80 frames with FR3 (or similar) boots? I have stock 3x110 frames for them and they're a little woobly in some situations, and I would like a 4x frame, but the 90 frames do seem a little long for me at 5'9.

[@owain100]

How do i fit a heel brake on this frame so that i can stop super super smoothly and safely? any advice on bearings so i can go faster? are quality Apex 3 bearings better than cheap Apex 11 bearings?

[@BlackyRay_Patrick]

i think the endless page even shows you compatible brakes.... at least it does for the trinity frames. I Bought a Heel Break and hat to cut a small gap into the break because it was to close to the 90mm wheels.

[@jgurtz]

Will the 100 fit the Powerslide Imperial, any mods needed?

[@ppolianidis1]

same question here :)

[@tonigonzalezjimenez2455]

Hi Ricardo Lino! I would like buy the endless frame 100, But I don't know how the wheels have to be rotated in this type of rockering setup. Please, Can you help me with this?

[@hamafel7559]

i need your help.i am obsessed with inline rollers.i have one and the plastic belt that compress the roller is broken.does anyone know how to fix it?

[@kevinnorris1691]

@Ricardo Lino will the 100/110 endless fit the Micro Beat?

[@RicardoLino]

Perfect ;) 🤛🏻🤜🏻❤️

[@lawrencecabrera5937]

Do you recommend a front rocker for rec and city skating?

[@dergeistliche2006]

Your shop doesn't sell skates in eu48, right?

[@oise08]

@ricardolino, which frame were you able to get 125 mm wheels? The 100 frame?

[@lawrencecabrera5937]

Would these fit the K2 Sodo boots?

[@ChessmasterHex]

Yooooo Lino was that the 80's or 90's in that clip at 1:08? That was some slick skating!

[@RicardoLino]

90s :) thank youuu

[@krisbohn4118]

Do you sell to the USA.

[@RicardoLino]

Yes we do :)

[@cbrcityrollers]

Ricardo Lino do you think we can use 110s on the 80/84/100 frame?

[@adamos486]

How do I get micro delta skates in eu46 or 47?

[@kaiserstorm886]

Could you review the NN frames too? It's very similar but NNs use 165 and 195 mounting so they're compatible with more skates I'm not that sure about getting them because they're aren't that many reviews and I trust that you'll give a good review

[@colore76]

@4:50: it's not "3 times 110" but 3x100

[@izzyg8316]

So, for size 39 and lower, go for the 80 one?

[@gregelwood7701]

@13:35, the axle-in being on the right side of the frame is to keep loose axles in while you skate, if they happen to come loose. The friction of the rotating wheel and bearing will keep an axle from coming out with this configuration. I wouldn’t change it. Check your gear before you ride

[@RicardoLino]

I know about this. Just like on a bicycle. But you wil see a lot of other brands such as powerslide, seba, etc having them to the middle. Having good hardware (axles and frames) will also help that they don’t come loose but I totallly understand what you say 🙏🏻🙏🏻

[@KephaBandMusic]

hi sir Ricardo, i like to order the Endless 4x90s! what are those boots that fit like that one on this video? i'm from the Philippines so i need good and exact informations if i buy from your store

[@Leggeaux]

Love the video!

[@hotforrobot]

Let's just say that I was prepared to manufacture my own frames, then I found Brad. Super unique offering for the blading community. I love all my endless frames #endlessbladegang

[@Dcfinest79]

Also quick question, those 125s wheels.... What frame were you using? Size Endless I mean?

[@KevGoesRiding]

Thats an endless 100

[@drleishaobo]

I got the fr1 eu 39, 84x4 combo, love them!

[@ericbernardi8116]

yay! We all waited for this... It was a good choice by the Endless owner to send you some :P I was thinking about the NN frames too but if you're such a fan of the endless I didn't have to think twice and pre-ordered some 90's right away before they're gone again! Sadly your shop has no 90 wheels... What are your fave 90 wheels? Do you like these Famus wheels you showed on one setup? They look cool but are about 130 Euros for 8... so better know they're good before I buy them...

[@bex_artistry]

Hi, I currently skate a women’s EU37 sometimes EU38 size powerslide swell boot with a 3 wheel setup of 90mm - 100mm. I’m looking to progress to start skating a 110mm 3 wheel setup in the near future. What size frame out of these would you recommend I try to suit a 3 wheel setup of 100mm - 110mm for my current boot size of 37/38. Is there one size frame that would suit both these needs or would I need to buy 2 of these frames to suit my needs. Obviously my current boots use the trinity mount system, but if these frames wouldn’t fit that boot, I’m open to trying other skate boots in the future to suit my needs but I wouldn’t know where to begin as I’ve only ever skates powerslide with the trinity system.

[@RicardoLino]

For your foot size I would say go 80/84s janice is a size 39 and loves hers, they are longer then the regular 3x110 people use and when with 3 wheels , a bit lower then regular 3x110’as they are for 3x100 . Still roll super smoooth. And will obviously also give you the possibility to use them 4x80 or 4x84 slight rocker which I SERIOUSLY LOVE

[@bex_artistry]

Ricardo Lino cool thanks so much 😊

[@BlackyRay_Patrick]

There are trinity frames from endless now :) Nice to have a triskater here. I'm using the powerslide next pro 110s :) im gonna buy a new endless frame next year to have the ability to sometimes drive with 4x90 beeing slightly rockered I had a longer 4x90 frame in the past with no rockering and I didn't like it but would like to sometimes swap between triskating and using 4 wheels.

[@MohammedElSanousi]

Any frames for powerslide next boots ?

[@BlackyRay_Patrick]

If you mean the trinity frames. Endless has new frames with trinity mounting ...

[@izyrajder]

how tall are you Ricardo?

[@22chainlink22]

Nice review!

[@ih8you176]

Ricardo lino you're cool

[@KephaBandMusic]

hi sir ricardo, i'll be buying a powerslide with the trinity mount. Is the Endless frame compatible with the powerslide trinity mount?

[@Chinoz2]

Definitely not compatible.

[@KephaBandMusic]

Hafiz Rusdianshah, thank you sir! yeah, that's one of my frvckin concerns on that boot!

[@BlackyRay_Patrick]

There are new trinity frames from endless same frame but with trinity mounting

[@cowonaviwus9470]

They should make a trinity frame

[@BlackyRay_Patrick]

they did

[@davew3935]

Thanks for the review, it is a little concerning that Janice felt unstable on a longer skate on those 4x80s

[@royjais7391]

Does come for trinity?

[@BlackyRay_Patrick]

Yea it came

[@kaiserstorm886]

If only I could use the 4x100 set up on my f5s but it only has a 165-195 mount =\

[@minbajunid]

im holding my breath waiting for E100 October delivery to start

[@RM-en9gk]

Finally got mines today, 6 month wait

[@minbajunid]

@@RM-en9gk nice one . Got mine couple of weeks ago

[@troydandrea9520]

I've been looking for some awesome skate I'll pay up the $1200 I just keep get more confused about it

[@amiuus]

Why can’t ship MICRO DELTA F BOOT to the United States?

[@RichHayterSkater]

Great info, Ricardo.🙏 These frames always look really good. How do you find the weight of them?

[@JakeyDill]

I mightn't be Ricardo, but I've gotten back into my old 4x80 on the adapts and compared to the endless setup for weight, there's not a huge difference, they are heavier, but you don't really notice it at all after you've skated them for a while.

[@ZadakLeader]

I wouldn't call Endless frames with 3 wheel setup is amazing. It's just normal. I would strictly use them for a 4x setup myself (and I know others too that think this who have them)

[@chapoguzman2448]

If only you could some how send me one pair of those 😣

[@johnviera3884]

It’s a triple option. Not double. How come nobody ever mentions that the 90 frames have three options? 4x90 3x100 3x110

[@mightlightt]

That u can do with all the frames then…

[@tonn333]

Independent does not equal unbiased.

[@colt45caliber]

Donate to a poor skater. I need power blade setup

[@denseenloveletter891]

What is that first pair rollerblade called?

[@KevGoesRiding]

Hi ricardo, you mentioned about fitting the 3 x 125mm on the Endless 100 but didnt go into much detail after the intro. Anything you can share with us? I have an endless 100 on adapt GTS boots and really would love to know if I can one day try 3 x 125mm on them! Any idea if they will fit?