Energy from the vacuum: Part 30 Floyd Sweet Memories

"Few people know that in the early days of the development of Floyd Sweet's seminal overunity device which was measured as putting out over a million times more power than was input, John Bedini was an integral part of the team. This team initially included Walter Rosenthal, and, later, Tom Bearden, but it was John who in fact built and tested many of the key components for Floyd Sweet, and it was John who sat with Floyd night after night at Sweet's house being tutored by him in the hidden electrodynamics that Gabriel Kron taught Floyd at General Electric.
Here at long last are John Bedini's recollections of that epochal time, and, much more to the point, John's technical analysis of what exactly was going on with the so-called Vacuum Triode Amplifier.
Brilliantly insightful and entertaining as always, this DVD will doubtless serve as a springboard for widespread additional experimentation now that much of the fog, confusion and folklore have been penetratingly destroyed in this DVD by the master who was present as the events unfolded-John Bedini.
And it once again is jolting to be shown that the conceptual roots for this device run through the U.S. Navy in the 1950s all the way back to Nazi Germany."

[@areexsevenproject]

Thanks for the great explanation behind it👍This device and the toriod coils have me so intrigued.

[@DavyOneness]

Bedini passed away back in 2016, but much of his knowledge lives on in this series. If this video intrigued you, you will love this entire 45 part series they put out about a decade ago.

[@areexsevenproject]

@DavyOneness it took me a little while to get through this video because I just kept rewinding it. I will definitely check out the whole series, if it's about anything related to ZPE or other intriguing science. Thanks for posting this!

[@DavyOneness]

@@areexsevenproject Energy from the vacuum = ZPE oh yea, you going to love this series! enjoy :)

[@theycallmechad4063]

I’m actually obsessed with this invention.

[@karbinunit]

It is very interesting I must admit :)

[@tajrad-963]

Can u tell me more about this invention? When I saw him on 12:34 .I was like this was destined 4 me 2 see and do 💠

[@McFlysGaming]

This video might blow up because of The Why Files.

[@zwxq3]

They might literally change the world

[@kreliz2845]

Literally arrived here through that video.

[@fireball75677]

LOL it's funny you should mention that, I just came here from the new episode

[@zachlandry7794]

Here here

[@lukiepoole9254]

Just google search "parametric excitation of electric oscillations" and you will know the true electrical engineering

[@tomdunnnz460]

We were invited to work with Floyd Sweet in 1986 by Mark Goldes from the AESOP Institute. We were both from New Zealand. We met Floyd and agreed to help him with his static generator. We became a little disillusioned with Floyd as his knowledge of electrical engineering was basic and didn't really fit with his claims to be an ex Professor of electrical engineering at MIT. It turned out to be one of many falsehoods. We spent months designing the electronics for Floyd. His device never worked. During our stay we also visited with Bruce Depalma who was working on his N1 machine at Santa Barbara. Disillusioned with the Floyd's claims we decided to fly to the UK and ended up looking into the rock electricity of an inventor called Adam's located in Stowbridge. We returned to LA with some of these rocks we had found in Wales. We showed these rocks to John Bedini in his workshop in East LA. We returned to NZ to continue our research into one piece homopolar generation. In our dealings with Floyd we found him to be delusional to the point of dishonesty.

[@DavyOneness]

@tomdunnnz460 yea, he seemed to had been stringing people along for money in his later years. Thanks for sharing the history on that part!

[@tomdunnnz460]

@@DavyOneness No problem bro. Bedini at the time was manufacturing so called scalar systems. Audio enhancement. He would encapsulate them in a epoxy. I personally destroyed one of these and found absolutely nothing. Period. Fraud.

[@DavyOneness]

@tomdunnnz460 That's only because you didn't know what you were looking at, you may have even exposed yourself to radioactive elements used to dope it, depending in the one you had. That actually was not a hoax, he shows the process in this part of the series: kzbin.info/www/bejne/iHqQooybott3d5Isi=29bvV4LWv3rg00Gp

[@tomdunnnz460]

He showed us in his workshop what went into these audio speaker junction boxes. It was a small disc of solid metal which he attached wires to either side. He said he then used a pot mixture to prevent theft of his ideas. All I can say is that when I took the ones we bought apart there was no metallic disc. Just two end wires embedded in the potting. We concluded at the time it was an obvious fraud. At that time there was a lot of fraudulent claims flying around. This was the main reason I abandoned any further research in this area. Only interested in getting to the truth not in ripping people off for a quick buck. All the best.👍

[@tajrad-963]

Floyd Sweets Seminal Overunity device Putting over million times more power than input Is this that invention?.. BRAVOOO 4 providing this type of amazing content and videos... Its rare Thank you ⚜️☀️👑☀️⚜️

[@DavyOneness]

@tajrad-963 There are far better things than this in this science series too, it's worth watching all 45 parts, especially if you liked this one 👍

[@shawncalderon4950]

I absolutely believe this worked. I also think it has absolutely no value until it is replicated. In science, an experiment that cannot be repeated is an experiment that never happened. Thanks for sharing this content. I can't wait to watch more content like this. The quality of this video is superb! Please keep up the excellent work!

[@DavyOneness]

Likely he would had violated GE's nondisclosure agreement if he revealed too much. He seemed to just use it to string investors along just enough so he could live off the money in his old age. I don't think there is enough info to trying to replicate it successfully. Who knows, maybe someone will figure it out, but for me, there are so many more better options out there to work on. I think the closest thing to sweet's device would be Bearden's MEG patent though, and that is more reasonable to replicate than Sweets. I'm glad you enjoyed the video, they are not by me, but the late Tom Bearden friends. They made some 40+ part series with like 70hrs of fascinating information. The series is called "Energy from the Vacuum" and is related to Tom Bearden's book of the same name. After Tom Bearden passed away two years ago, the DVD series stopped being available any more for sale.

[@shawncalderon4950]

@@DavyOneness Thank you for writing a thoughtful response. Whether or not these interesting devices work, they are thought-provoking. Again, thanks for the excellent content.

[@thomastipton7264]

I also believe it works. I've recently begun researching into this, not as complex as initially appears.

[@alanx4121]

@@DavyOneness the magnet conditioning is to obfuscate bc of the nda.

[@brianp5210]

You can tell he's holding back so much. His respect for sweet is something most people cannot understand.

[@wonderstud]

Thank you for sharing. Whatever happened to the -CLOSE- -HOLD- documents? I gotta think there is more information to go on in those. I am definitely intrigued by this and although I think I could bake the magnet to get it ready for re-programming, I don't think I could put the correct program into the magnets without further clarification on what works, or it would just be a massive guess and check scenario.

[@DavyOneness]

@wonderstud I think they were included in the cejaka DVD with other files. I believe the magnets used were unique in that they could be programmed, and because of that, they are no longer available and hard to find, and expensive if you do find them.

[@qintusquark4854]

I have the greatest respect for John Bedini but sometimes it's a bit hard to know what he actually means. When he's talking about heating the magnet to its 'cure' temperature, I wonder if he means 'cure' as in "curing concrete" or Curie temperature as in when a material loses its magnetism? Especially at the end it was really hard to distinct between the two since he pronounces them the same.

[@DavyOneness]

@qintusquark4854 He wasn't always the best with words or spelling, and then sometimes he is cryptic because he can't just come out and say things in some instances. But in this case, he is talking about the temp at which the magnets loose its magnetic properties. But also, the type of magnet used was very key, and only seems the now hard to find and expensive barium magnets are the only ones this process would work with.

[@johnlabonte007]

Just wondering if the magnetic field of the Earth comes into play

[@silversobe]

All the secretiveness is why we are stuck as a civilization. It all needs to be open.

[@DavyOneness]

@@silversobe the secretiveness is just a symptom of a much larger problem.

[@thexrayman50]

Just an observation noticing the wire windings towards the front That looks like a much larger gauge wire for the windings than what was in the original Sweet schematic of this. It used mostly all #28 and #26 gauge wire with a lot of turns. And some #20 gauge wire. Any of this wire looks much larger than that. 2000 turns of #28, 250 turns of #26 and 240 turns of #20. Or did he just build this for demonstration purposes?

[@McFlysGaming]

I believe the thing in the middle of the box is a ferrite core wrapped in those small wires.

[@DavyOneness]

That is possible, as a feedback loop to tune it. But we may never know for sure

[@fireball75677]

@@DavyOneness someone who's trying to replicate this can try it with and without the ferrite core

[@DavyOneness]

@@fireball75677 the ferrite core would be the feedback needed to eliminated the need for the 60hz frequency generator.

[@lukiepoole9254]

Why does EVERYONE forget that the device operates on parametric resonance, is a parametric transformer? ._.

[@lukiepoole9254]

Like parametric resonance exists lol

[@angkimdkonvacimn]

i just dont understand why people hide their secrets when the know that they will die one day.. you will not to the device in grave

[@qintusquark4854]

Floyd Sweet, Ed Gray, T Henry Moray, Stan Meyer... The list can be made long of inventors who most likely had a working free energy device. What all of them have in common is that they were paranoid about anyone else finding out how their device worked which resulted in that they brought the secret with them into their grave. So if anyone has an invention like that, they should really ponder about if they want to join that list. Is that really something to strive for, to invent something that could change the course of humanity and take along the secret into the grave without ever releasing it? I believe that Steven Greer is absolutely correct, he says that the ONLY way to bring out a free energy device is to release it as open source.

[@paulshields1883]

I'm beginning to understand what lead to Sweet firing Bedini: he wasn't learning! Chasing the idea that magnet conditioning is a hoax, what useful activity might Sweet have been performing when he said he was doing this? He was measuring the magnet's natural resonant frequency! The schematic is now looking, to me, like a heterodyne frequency mixer: if the natural frequency of the magnet is f, then left and right resonant subcircuits, call them A and B, are excited such that f = f(A) + f(B); and output frequency is f(A) - f(B) = 60 Hz.

[@DavyOneness]

@paulshields1883 Sweet wasn't interested in anyone finding out how to do whatever he was doing, he just wanted to milk people of their money by showing them just enough to keep them interested in putting money in, as his retirement fund. Since you think you are smarter, I look forward to your successful replication you will be sharing soon on KZbin!

[@MarkPresquito]

Anyone can provide me a clear schematics, or much better a step by step video of this machine?

[@DavyOneness]

No one has been able to successfully replicate one to date. This DVD has the most info I have ever seen on it though, because it also points out the misinformation Floyd was giving out to protect it

[@stevehall8345]

@@DavyOneness Perhaps someone has replicated and optimized the Floyd Sweet / Arthur Manelas technology, but they are remaining under the radar - for good reason.

[@lukiepoole9254]

It's a goddamn parametric resonant transformer. The perpendicular windings gave it away

[@alanx4121]

@@lukiepoole9254 so is the MEG, permeability in the flat part (saturation region) of B oscillates. Trigger is in the same direction as the flux

[@TSB996]

(from a different video "The Cejka Files") do you know if Bedini ever uploaded The Cejka Files? It sounded like he was going to let Pat & team make a DVD with all those documents???

[@DavyOneness]

@TSB996 I heard in a Greer interview recently that the disclosure project has the files from the DVD, not sure if they have it publicly available though 🤔 was funny though, he made it sound like they were not already available to the public before they got it, and he called him "cijaki" 🤣 🤣 btw the disc clearly doesn't have all the files he photocopied, so would like to know where they are all now

[@qintusquark4854]

@@DavyOneness I downloaded the Cejka DVD from a file sharing site back in 2013 (sorry, don't remember which site or protocol) but there is no information on the vacuum triode among those files. The only file with Sweet's name on it is "The space flux coupled alternator" and that not about this.

[@DavyOneness]

@qintusquark4854 back then, was probably on the conspiracy central tracker site. I also downloaded it because the original dvd had a time limit by date before blocking you from your own DVD, lol. I thought I remembered seeing it on there, that sweet file, but maybe it was under different file name or lumped at the end of another file like some of them are. Rex Research probably has it, though.

[@DavyOneness]

@qintusquark4854 This the one you looking for? If not, it should also be there. rexresearch.com/sweet/1nothing.htm

[@qintusquark4854]

@@DavyOneness Thank you! I couldn't find those files myself when I looked. I remember I read much about Sweet's VTA back in the early 90's but the rumors of the conditioning process never made any sense. But when John Bedini explained how he thought it worked, it made perfect sense! It might be worth having a look at again after 30+ years since I still have the two barium magnets I bought back then so I only need some spare time ...

[@nevernether3368]

Id like to make a replica. Anyone have any tips? I only have the minimal list (VTA with conditioned magnets tigher coil and power coil, generator, osolator, capacitor, and amplifier) but I can't piece everything together. Especially the amplifier

[@JB-20]

You can try using by your own mind. There's no exact plan to follow.

[@JB-20]

If John said the truth, this gives me a clue. I will try this soon when my current project is done. I believe he didn't understand the conditioning. But he is right; there's something about the oven. I believe the oven removed magnetism, and conditioning is to create back again, but in a different polarity depending on the target polarity. It might be that the original design of the magnet polarity didn't fit the device design, so he removed it by heating and changed it through conditioning before attaching it to the device. So the oven to removed and the conditioner to become magnetic. The fine wire is to manipulate the stationary magnetic field by canceling or redirecting the field back and forth to create a rotating magnetic field or to create a zero and one alternately. It makes sense to me, but an actual experiment will give an exact answer. In the drawing he presented, a note from Tom would also be correct; that's why there's the oven and also the conditioning coil. So there's no third coil. Some people installed the third, but I believe it is the conditioning coil, not in the main device.

[@DavyOneness]

I think the oven may have been more to bring it close to the temperature that it would loose magnetism, without it demagnetizing it. But it may have also been to "erase" the magnet if the conditioning process didn't work out correctly. People seem to also miss that the specific type of magnet is important here, and the conditioning process is for the barium in the magnet. I think a third coil was used at aome point as a feedback coil so the HP audio oscillator was not needed. Good luck with your experiments! You may also want to check out Bedini's 'glass case motor ' video too, as it is related to what he learned from sweet.

[@JB-20]

@@DavyOnenessOk thanks, I'll check it out.

[@thomastipton7264]

Check into barium ferrite magnets. Self oscillating, heat the magnet to "soften" the Flux shock at the top of the wave of small amplifier coil and power coil. Align nuclei in barium to obtain oscillation. Seems simple enough..

[@godwinsboom]

Sweet pisses me off lol

[@DavyOneness]

@godwinsboom lol, yea, I think he strung people along to get "retirement" money to survive on. He no doubt knew something, but knew better than to tell it all. He still inspired Bedini "glass case motor" and Bearden's "MEG" though, so not total lost.

[@godwinsboom]

@@DavyOneness Yah,I just wish he would have been nice to John :)

[@tajrad-963]

12:34 😍⚜️👑⚜️ When i saw him drawing this allshape He got me to the core 🪷♻️☀️♻️🪷🔺♦️💢♦️🔻 This is same stuff Walter Russell was lecturing about. Idk nothing about this man ot this invention But i can see its potential And if anyone can explain me i would be grateful 👉⏳👈

[@DavyOneness]

@tajrad-963 John Bedini was very familiar with Walter Russell's work, and mentions him often in relation to what he is doing, especially when it comes to transmutation and Russell's special chart of elements