Radio Removal 2006-2009 Volkswagen MK5 Golf GLI GTI Jetta R32 Rabbit

For more videos and all the products used in this video: shop.enfigcarstereo.com/radio...

[@vL07k]

12 yrs later still helpful

[@Enfig]

It's a timeless classic lol

[@MarkfromNewYork]

Dude has two left hands.. nice..

[@Ric302Vr6]

Thx man 11yrs later still getting hits

[@Enfig]

Thanks!

[@JessedeVries]

I've got a 2008 Jetta, thanks for your help, worked perfectly! You guys make it look much easier than it is but I couldn't have done it without you.

[@bruceruehl312]

Old video, but exactly the guide I needed to disconnect dice aux cable and re-connect original SAT receiver. Took me half hour, save $125 from the local VW man! Thanks for the lesson, you all do a great job.

[@EarthtoDave]

This is EXACTLY what I needed. The black buttons on our radio have bubbled up. I bought a newer silver-buttoned radio and was able to swap the faces....looks great! I couldn't have done this without your help. Thank you for taking the time to share your expertise. ---Dave

[@dont4get2wipe]

Great job on the video. I still don't want to bother swapping it out myself because while you make it look easy I can see myself getting frustrated and snapping, and I don't want to be responsible for screwing something up in my immaculate interior - but now that I see how modular the design is I feel comfortable trusting a decent car audio shop to install a deck without making a mess.

[@alexandrej.maurent7155]

It was very helpful to me to be able to follow up every second of this video to remove everything without breaking anything to finally remove the radio. Unfortunately the used unit that I replaced it with it was not working the way I was told it was. CDC hardware error that keeps interrupting even when listening to the radio. But as far as this video being help full of course a 100% without it I wouldn't have been able to do it myself. Thanks again guys.

[@Enfig]

Sorry to hear. Its probably too late for you but we have started selling packages with radios includes.

[@bbbmw]

thanks so much for a very good video! just what i needed to see to tackle this job.

[@phildalby7334]

Good walkthrough. Took out my dead Sony XPlod, which I regretted buying almost from the day I had it installed, and put the old unit back in pending a better selection. Very easy instructions and I wish the people who installed the XPlod had read them too because I found the gouges, missing clips, and missing screw that they obviously were unaware of.

[@ErikGiovani]

"It's always tight the first time"

[@Roman-en9jw]

😂😂I was bout say that too

[@awsweet]

thanks for the great video. I am going to try this on my wife's 2006 Rabbit, which looks exactly the same.

[@Thatguy08]

Excellent video. professionally done. Thank you very much.

[@Enfig]

Thanks I appreciate it.

[@Juanman531973]

You guys are Lifesavers the instructions I got with my stereo for installing in this specificvehicle had nowhere near the details that you guys did this was an awesome video thank you so much it helped me immensely. About to install my new radio super excited thanks again guys

[@Enfig]

You're welcome.

[@alpine9996]

This was terrific. Thanks for the video.

[@Enfig]

Thank you and you're welcome.

[@Kaiawesome]

thanks a lot, no problem changing it with this tutorial

[@PugetSoundFlyer]

Many thanks for this video. Great instructions and to the point! Saved me a bit of $$ during my no work, Covid lock down :)

[@Enfig]

lol not a prblem.

[@monkeytrader]

Thanks for the help it was a life saver!

[@vancityflyguy]

Thnx for this video. saved me a bunch of money and time. awesome!

[@qluuuuuuuulp]

Very complex system. I remember it took me two hrs to remove the radio on a mk5 golf Edit: Though, with time and patience it can be done without issues. If I can do it so can you :). Good video btw.

[@SillyReviews]

Excellent video. Thanks so much!

[@Enfig]

Thank you!

[@atxgIII]

Thanks for the awesome tutorial!

[@Enfig]

Both are AM/FM. The Enfig AAA-VWAUD4. We also have a wire that lets you use your factory Sirius antenna.

[@MrMaximoisgood]

Thank you very much. This video was really helpful.

[@abelesparza538]

Great video,, help me a lot,, good job guys Short and helpful 👍🏼👍🏼👊🏼👊🏼👏🏼👏🏼

[@Enfig]

Thanks I appreciate it.

[@davidanthonyruizjr]

Thank you guys!

[@Enfig]

Not a problem.

[@treniermcclain6679]

Good job !

[@bonesenruben]

3:33 'it's always tight the first time'

[@theassembly6079]

doin gods work son

[@Enfig]

+Video Game Beat Off lol thanks

[@yoelvisboan5914]

me encanta vw se lo recomiendo a todos

[@blinkiboy89]

sweet, thanks for this

[@leandrooslaj4664]

hi! this radio/cd player have a internal fuse or just one on the fuse box? Tks !

[@Defiant031636]

Great video guys! I wish I could take my 06 Jetta to you guys (I live near Toronto though), I want to get the iPod adapter installed (I have no CD changer) but I worry about doing it myself because I've never done car audio stuff before.

[@xbrnejj9142]

Thank you ,good work!!!

[@Enfig]

+Chaqa Acasa Thanks I appreciate it.

[@remigioalejandrosanafriaya2734]

gracias exelente tutoria

[@kineshnaidoo637]

Hi, Thanks for the video,very informative,however i just would like to know,with regards to the power source,the factory fitted radio,has power cable,which sends power to the deck even with out the ignition being turned on,if i am going to fit my own radio,do i need to seek an alternate source for power that operates with the ignition being turned on as the deck im going to use,if the power does not go of the illumination on it stays on,Please could you advise

[@miguelcamargo4531]

Very god video and thankyou i did it i take off the fuse and work my stereo

[@GiovanniCornelius]

First of all thank you very much for the video! I have a 2006 2.5 jetta w/ the standard radio. I wanted to know if I would be able to put in an auxiliary port without having to sacrifice my cd player? I am not sure but it seems like i would only be able to have one or the other.

[@SilverSpade92]

You mentioned something about a connector on the ventilator on top of the dash. Mine doesn't have on either, just this strange plastic thing. What kind of connector can it be?

[@colotopi]

Where do I can get the plastic tools that you use to take out the plastic pieces ?

[@Enfig]

Ignition, Illumination, VSS, Brake and reverse are done via can-Bus. The ENFIG SRWH-VW07 will help the installation.

[@slingshot88150]

Very helpful thanks

[@nly664]

awesome, got my cousins jetta and I'm excited to deck this baby out...Lol

[@Enfig]

Congrats and good luck!!!

[@rokitrod36]

This is an excellent video, very helpful. Thanks I'm trying to figure out what the 2 antennas cables are. I thought one was for the satellite as I was going to connect it to my portable sirius unit but I don't think it is. Now I'm concerned that one is am and one is fm??

[@enriqueaguilar7279]

i was just wondering if you could tell me what wire on the factory stereo is the remote wire for when connecting an amp. Thanks for the video either way, it was great and very informative.

[@cameronforeman4278]

I know this is a old video but do these cars have any kind of security to there radios? I want to replace mine with aftermarket but I don’t know if I need some special connectors or anything like that

[@Enfig]

The car has can bus. Most of the answers you need are here. shop.enfigcarstereo.com/radio-installation-products-2006-2009-volkswagen-mk5-golf-gli-gti-jetta-r32-rabbit/

[@bgdisho]

Just curious, are there "keys" available to do this the easy way?

[@cboe5166]

Excellent vid! Would you have anything on removing the rear a/c vent?

[@Enfig]

Sorry we do not.

[@JoeC92]

would a clarion NX501 deck fit ok in a 2006 jetta?

[@jamesorban9332]

Where did you find those blue and white pry tools? Also if I'm replacing this unit to put in an aftermarket unit will I need a code?

[@Enfig]

+James Orban enfigcarstereo.com/ENFIG_PPT_12345.html

[@6vbz]

is there any way i can wire in a aux cable to my jetta that doesnt come factory with it. the radio has the aux option when you double press cd but its $120 for an adapter, in which i might as well buy a new deck lol

[@xC0M9UT3RxG33Kx]

How difficult would it be to install a 7 inch tablet into the Jetta? It seems like the radio is a perfect size. Help please!!!

[@SilverSpade92]

I'm not worried, I'm wondering if it's possible to install something there?

[@alejandrogamez4696]

Good day , a question ... What is the remote to the amplifier , which is only blue cable . but that pin this ?, you have the diagram? My car is a Jetta / Bora 2007

[@Enfig]

Not sure we use a switched power at the fuse box.

[@JohnDoe-gm5qr]

You might even want to use a magnetized screw driver. It is also easy to magnetize one if yours are not already magnetized. I have a rare earth magnet 1 inch square and 2 inches long. It is one of those things you want to be careful with around your car. Once you get it stuck to your car you will mess up the paint trying to get it off. I have used it once but wrapped in a cloth to get it off, to pull a small dent out (or at least try) and it did pull out a little bit. Wrapping it in cloth like that makes it less likely to scratch and gives you some kind of handle to get it off more easily. They are strong magnets and fun when used SAFELY.

[@johnf6288]

Does anyone know what the fuse size is on the back of the radio? Mine has probably blown so I wanted to get that first. Is it a cartridge style fuse? Thanks for the vid this should really help me out

[@truckinman86]

that connector is a sensor for the automatic climate control system for the upscale Jetta's and the GLI's

[@johnwinters902]

Have 09 jetta, want to put factory touch screen in place of the factory analog stereo that's in it. Is it direct plug-in-play?

[@Enfig]

Not always. If you do research sometimes doing swaps from newer cars causes battery drain.

[@antons.5556]

Thank you

[@Enfig]

Not a probem.

[@heatherlawson6874]

Thanks dude! Only broke one clip. Lol

[@Enfig]

That's better than two 👍

[@bulky360]

thamks so useful!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[@livingstonec838]

Does this video apply to 07 Jetta 2.5

[@Enfig]

That's fine. I'm an installer with no formal video training. Does this video not show you how to remove the radio?

[@xLedZep2112x]

If i am installing subwoofers, do I need to change the stock head unit or is it possible to not have to. And will changing it effect the steering wheel controls

[@Enfig]

+Sleezy Steve This will give you an RCA out. But you will get better sound out of an aftermarket radio. enfigcarstereo.com/ENFIG_AAI4_VW12.html

[@luisnaranjoespejo4273]

can you show me the way to take out the radio CD RCD 210 from my VW POLO 1.6 TDI (year 2009)? I want to see the code inside. Thank you very much

[@Enfig]

That make sense... Thanks for the info...

[@Enfig]

@bgdisho It should with the correct kit.

[@nivlacker101]

i needeeedddd thisss thnx

[@eophatboy]

Where can I find the radio security code? I'm locked out of my radio and I followed this video step by step. Thanks.

[@Enfig]

The security code is not needed unless the radio has been replaced. If you need a code the radios was probably replaced. The dealership is the only place to get the code.

[@JayPryce]

What size radio is needed to fit in a 2007 Volkswagen Jetta? 6.2" or 7"?

[@Enfig]

+Sophisticated Records As long as it is a standard double din then both will fit.

[@dainryder8234]

I love the very end “alright lets get the fuck outa here, it’s hot as hell” hahaha

[@Enfig]

😂😂😂 Sometimes it's like that.

[@comedyman112]

Hello. Thank you very much for this video. My top central air vent is making rattling noises. Is there any way I can deal with this? Some kind of foam applying? Can I replace it with the other version ( storage compartment)? I have golf 5 with climatronic

[@Enfig]

+comedyman112 Many people use the storage compartment. I have seen cloth tape used to prevent rattles.

[@ozkarr]

Will this work on a 2012 model?

[@jdmderick]

@JoeChitussi not sure rather get the RNS510 or RCD 510 unit but make sure to do the update on your software...... otherwise there will be a draining of the battery

[@Lexo593]

Are all the screws the same or should they be separated?

[@Enfig]

On that car I'm 99% sure they are.

[@BALLINISMYHOBBIE]

@enfig will this deck fit in my 2006 jetta 2.5 dash.. Navigation/AVIC-X930BT

[@Enfig]

The radio is discontinued but the new version will also fit.

[@thegooberman]

I have a 2009 jetta that has the ipod dock in the center console. I want to install an ipod ready stereo and keep the functionality of the ipod dock as I still have and use a classic ipod. is there any kind of adapter or something i can use to do this?

[@Enfig]

That would require a custom modification. You would have to open the dock and glue in a 30Pin cable

[@waxkyl1719]

Hi I just got this new Jetta city 2009. My Bluetooth used to work but since we stopped the battery for a bit, it doesn’t wanna appear on my phone to pair. Is there anything to do?

[@Enfig]

I'm sorry I do not know anything about the factory Bluetooth. If you cant get it working we sell the GBL3VW1 for your car. shop.enfigcarstereo.com/product/dension-gbl3vw1/

[@eddyg87]

Guys, where can I buy those little blue and white tools that you use to take the pieces out? Enfig they seem to be very practical

[@Enfig]

+Edwar Gonzalez enfigcarstereo.com/ENFIG_PPT_12345.html

[@sdubb1518]

Is there a install video for the Enfig AAI4-VW12 or something comparable to that? Thanks.

[@Enfig]

When you remove the radio it just plugs right in. We didn't feel there was a need to do a video for that car. Is there any specific things you are looking for?

[@sdubb1518]

+Enfig Gotcha. No that was it. I have that piece and I'm going to install it on my mkv jetta and I just wanted to know if there were any special instructions. but thanks!

[@Enfig]

No problem.

[@rocky1266]

Just out of curiosity, what is the part number for that part you lifted up at 3:45? I went to have a new radio installed today and the idiot installing it must not have known about those screws and he broke the plastic and it looks like I will have to order that whole piece you lifted out just to fix that one spot.

[@Enfig]

Sorry I'm not sure about the part number plus they probably have different parts for different colors of dashboard.

[@CarnivoreConservative]

I wonder if you can see the evaporator from there

[@nyvolt8737]

which antenna connection is for the am/fm the white plug or the light brown one? what is the other for? sat radio or something? any advice how to remove rear panels for rear speaker install?

[@Enfig]

+NY Volt They both are its a dual antenna system.

[@Enfig]

Yes it should be the same.

[@dimitarkrumov4661]

please need advise how to install radiocaset from jetta 2001-2005 to jetta2009 under armrest with existing ipod slot

[@Enfig]

That sounds like a very cool project but unfortunately I cannot help you with that on the internet. If you are local give us a call.

[@gavinyoungblood5857]

I have a 2009 Jetta sportwagen and can’t find a radio replacement at all. What was the replacement in this video?

[@Enfig]

You can fit any standard radio into this car. Email us we have a radio package for this car.

[@gavinyoungblood5857]

@@Enfig and will it be just a plug and play or will I need a wireing harness. And all that stuff

[@Enfig]

@@gavinyoungblood5857 All of our kits are plug and play.

[@gavinyoungblood5857]

@@Enfig what is your email

[@Enfig]

@@gavinyoungblood5857 Go to our website and click on contact us.

[@artgoat]

What happens if you turn the key on with the airbag switch disconnected? Wouldn't it just set an airbag system DTC? When you say I'll have "trouble," I'm picturing all the airbags going off at once.

[@Enfig]

Just a code but most people do not have the tools to remove it. Also when this video was made there weren't the cheaper options that there are now.

[@Mi_Fa_Volare]

Is there an extra 12V socket inside by the way?

[@Enfig]

+volarecantare No but you can always add one.

[@Enfig]

Yes..

[@IMuteChildren]

I installed a new battery on my 06 TDI Jetta. Causing the SAFE code display. I dont have my radio code. That being said, can i take my radio out and get the serial number of it searched for the code instead of paying $130 for a dealership to hook it up to a computer?

[@Enfig]

Usually the car remembers its own radio. If the radio requires the code it has probably already been replaced. You can try and call VW corporate. I had a customer do this with his Audi and they gave his the code for free.

[@checkcard1982]

is that a phillip head screw or a 5 star tip? also is this the same for a 2009 jetta ? can you provide the name or the harness kit and dash kit needed ?

[@Enfig]

t20 torx

[@Enfig]

email me about the kit because we have radio specific harnesses. [e-mail]

[@jamalkhoury7906]

What if you're just trying to add a sub that doesn't require an external amp?

[@Enfig]

So the amp is built into the sub? A sub needs an amp. And what is your question?

[@TheParthbhatt]

Does the radio have a fuse on the back of it?

[@Enfig]

Yes but that is almost never the problem.

[@Enfig]

We have many options for adding an aux. Just call us up.

[@edwardcase]

I forgot about not unplugging the airbag light. Now I have an idiot light on my dash that says airbag trouble. Does this have to be corrected at the dealership?

[@Enfig]

You can find tools online that can do that at home for cheaper than the dealership will charge.

[@edwardcase]

@@Enfig thanks

[@vivofelizasi]

hey man i was told these radios need a special module,($100 and some) how truth it is?

[@Enfig]

+vivofelizasi This module keeps the install behind the radio. enfigcarstereo.com/ENFIG_SRWH_VW07_NS.html

[@RyanTomes]

Does the OEM radio have a fuse in the back of it?

[@Enfig]

Yes but in 20 years that's only been the problem like twice.

[@RyanTomes]

@@Enfig funnily enough, it was the fuse on my radio.

[@Enfig]

@@RyanTomes That's great to hear. Like I said it happens but not often.

[@Enfig]

The radio must be replaced or sent for repair.

[@nicksamples2620]

I recently bought a 2006 Jetta. I am planning on installing subs and an aftermarket radio. I've never installed subs in a car before, and am wondering where I might find a guide to help me do it with my Jetta.

[@Enfig]

+Nick Samples Sorry that is too big of an install for us to do a video.

[@nicksamples2620]

I'm not really asking for a vid, just wondering if anyone has done a video for installing an aftermarket radio.

[@Enfig]

+Nick Samples sure kzbin.info/www/bejne/hJzMk52uicx6mcU

[@bics5664]

I am getting a CDC Hardware Error. If my only option to replace the entire unit. This is a 2008 Jetta with a 6 disc changer. Tried to eject the discs and it took a long time and nothing came out so turned the car off. Turned the car back on and the error appeared and nothing will work at all.