Engine Coolant Change - Peugeot 206

Draining and refilling the radiator coolant (antifreeze) in a Peugeot 206 from 2002 to 2009. Thanks for watching. Please comment, like and subscribe !.
All of my uploaded material is protected under copyright law. None of my videos may be re-uploaded, reproduced or transmitted, in part or in full, in any form or by any means, without the written permission of the copyright holder.
© / screwsnutsandbolts 2022
Read important information below:
Disclaimer
Under no circumstances will Screwsnutsandbolts be responsible or liable in any way for any content, including but not limited to, any errors or omissions in the content, or for any loss or damage of any kind incurred as a result of any content communicated in this video, whether by Screwsnutsandbolts or a third party. In no event shall Screwsnutsandbolts be liable for any special, indirect or consequential damages or any damages whatsoever resulting from loss of use, data or profits arising out of or in connection with the availability, use or performance of any information communicated in this video. Due to factors beyond the control of Screwsnutsandbolts, it cannot guarantee against improper use or unauthorized modifications of this information. Screwsnutsandbolts assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Screwsnutsandbolts recommends safe practices when performing any do it yourself repairs and or with tools seen or implied in this video. Due to factors beyond the control of Screwsnutsandbolts, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Screwsnutsandbolts.

[@sharonmcgovern1918]

Thanks!

[@screwsnutsandbolts]

Thank you very much, I really appreciate it !

[@sharonmcgovern1918]

It's only small but thank you. It was a really informative video. I've been given this car and I want to be able to take care of it and understand the workings 😊

[@screwsnutsandbolts]

You're very welcome, thanks again 😊

[@josedelaluzavalosaleman8122]

@@sharonmcgovern1918

[@markwilliams2830]

Great step by instructions easy to follow.Thanks for taking the time to make the vid.

[@screwsnutsandbolts]

You're welcome, thanks again :)

[@RC-cm1my]

Great video. Thanks for taking the time to make it.

[@screwsnutsandbolts]

You're welcome, thanks for watching !

[@Pitaoj]

Thanks so much for a VERY good instructional video on replacing the coolant!

[@screwsnutsandbolts]

You're very welcome, thanks for watching !

[@sendaker4541]

Thank you for your lovely asmr videos. I enjoy and learn a lot whith them.

[@screwsnutsandbolts]

Glad you like them! :)

[@TAM-bw3bz]

Thank you for your great work!

[@screwsnutsandbolts]

Thanks for watching !

[@tompok76tompok76]

Thank you a lot, Tom

[@screwsnutsandbolts]

You are very welcome

[@khalilbenalgia4279]

very instructable , very useful, thank you for sharing

[@screwsnutsandbolts]

You are welcome!

[@mikelfernandez1980]

Great Video. Thanks

[@screwsnutsandbolts]

You are welcome!

[@yakupsakar6184]

good video, waiting for new series Peugeot 206

[@gasi9613]

👍👍👏👏 Many thank’s!

[@screwsnutsandbolts]

Thanks for watching ! 👍

[@user-ps6nj9jy8t]

Лучший. Спасибо)

[@screwsnutsandbolts]

You are welcome, thanks for watching !

[@TheBestDarkSide]

Thank you!

[@screwsnutsandbolts]

You're welcome!

[@sharonmcgovern1918]

Thank you 😊

[@screwsnutsandbolts]

You're welcome 😊

[@borja6083]

Congratulations for the video, detailed explanations as per Haynes, Good job!. (I think it is also valid for 205 )

[@screwsnutsandbolts]

Thanks for watching !

[@atila8623]

Thanks a lot it's helpful

[@screwsnutsandbolts]

You are welcome

[@attouiabdou2651]

Merci 😘

[@screwsnutsandbolts]

You're welcome !

[@goodwillhunting9572]

Weird that my mechanik lied me, i gave car to change coolant liquid, he did but on papers he gave its written charge is only for 1litre liquid 😅

[@hectorherbert6585]

very clear vid..I wanted to say that since access is made easy changing to a new thermostat (89°c) is a good idea to complete the full task..and watch out for that engine block torx bleed screw..she's 'fragile'..!!

[@screwsnutsandbolts]

Thanks for watching !

[@chrisgill7123]

Great video.Good camera angle,good explanation step by step❤

[@vegitoisbaas]

I have noticed it is fragile🥲 still got it to work

[@screwsnutsandbolts]

Thanks for watching my video. If you found this or any of my other videos helpful, maybe you could consider supporting my channel by using the ‘Thanks’ button below each of my videos. Your support would be really appreciated, thank you ! 👍 Screwsnutsandbolts

[@tamakitamaki295]

Que tipo de líquido refrigerante utilizas para el Peugeot 206 ?

[@e.s.1321]

Hi, how can I recognize if the engine is 1.1 or 1.4 ? Tks

[@fouzaialaa7962]

thank you for this video ive been looking for the bleed valve for a few days i have a 206 with 1.1 engine ...my problem is i feel like the fan turns on too late .... i read online that the medium intensity fan turns on at 85 to 90 .... mine turns on at half intensity at 100 degrees and at full blast at 110 degrees .... do you have any idea why it does this ??

[@screwsnutsandbolts]

It could be a faulty thermostat, coolant temperature sensor or something else

[@ethanmccrory2088]

Mine is exactly the same. Coolant looks dirty so gonna change it and see if that helps

[@tamakitamaki295]

Cambiar sensor de temperatura

[@studio1998clv]

how do i know if i have 1.4 sohc or 1.4 dohc?

[@braizat]

Me gustaría ver el video pero al 308 Gracias

[@uroskostic8570]

Why is everything on French cars more complicated than on other cars?

[@screwsnutsandbolts]

I don't know, I really don't lol. Have you seen a video on changing the air filter on a Peugeot 308 ?......now there's a complicated job !

[@uroskostic8570]

@@screwsnutsandbolts my sister owned 308 and it burned oil like it was two stroke :))) hahahah ...I own Lancia Kappa 2.0 5.20 ...even with massive 5 cylinder engine, everything is on hands reach.

[@user-vw7ex9ty4m]

this is not correct since the antifreeze was not completely replaced! How much antifreeze did you drain? 2-3 liters?

[@FAB1150]

What type of coolant do you use? I really can't find the info online. Thanks!

[@screwsnutsandbolts]

The manual recommends BASF Glysantin G33-23F or Gurit Essex Revkogel 2000 or equivalent.

[@danalvesDR]

Do you recommend G11 or G12 coolant for a petrol 1.1 206?

[@screwsnutsandbolts]

Either one is fine

[@wowftw120]

Why do I have to remove the air filter? Can't you just bleed it from the bottom?

[@FIXnMIX.]

He did that to unscrew the second bleed nut on the left side of the cylinder

[@giveaf9370]

The coolant in my expansion tank is like frothy. How do I flush this from the cooling system please?

[@screwsnutsandbolts]

Did it become frothy after you changed it or was it already frothy ?. If so it could be a sign of an underlying issue. Check this link: askinglot.com/what-does-it-mean-when-your-coolant-is-foamy

[@c_ibrahim_yildirim_c6737]

👍

[@screwsnutsandbolts]

Thanks !

[@SmAEsch0R]

thanks

[@screwsnutsandbolts]

You're welcome!

[@andresyopasa2337]

Hola, cómo se llama la espuma que tiene de protección la manguera desfogue 8:22

[@screwsnutsandbolts]

It's called pipe foam insulation: www.google.com/search?q=pipe+foam+insulation&source=lnms&tbm=isch&sa=X&ved=2ahUKEwjCj-2n9r33AhVPasAKHWyKCM8Q_AUoAXoECAEQAw&cshid=1651395185137399&biw=1536&bih=722&dpr=1.25

[@andresyopasa2337]

@@screwsnutsandbolts Thank you

[@screwsnutsandbolts]

You are welcome :)

[@christma4857]

my fan isnt turning on and off after following all the steps at the end, does this matter that much?

[@screwsnutsandbolts]

Maybe the engine isn't getting hot enough ?

[@christma4857]

@@screwsnutsandbolts no idea, maybe not because it was a cold day, I did rev it for quite a while

[@martymartin2894]

Mine is 307 and was easier to get to the bleed screw on the thermostat than on this one.

[@yyvv1488]

Y EL CHAMPÚ PARA LOS VIDRIOS DONDE SE ECHA?

[@screwsnutsandbolts]

This video will help: kzbin.info/www/bejne/jZ3Seouej6tkhs0

[@ejndzelyarte3661]

Is this same on 206+, 2011 ?

[@screwsnutsandbolts]

I'm not sure about the newer model, sorry.

[@skatehero7703]

hello my car is 2002 model 1.4 petrol. What type of cooler should I use?

[@screwsnutsandbolts]

The manual recommends BASF Glysantin G33-23F or Gurit Essex Revkogel 2000 or suitable equivalent

[@skatehero7703]

@@screwsnutsandbolts Are there any new products with these approvals?

[@balazskurtos4972]

And the 1.9d?

[@screwsnutsandbolts]

I'm not sure if the 1.9D is exactly the same as this. It's not covered in the manual I have.

[@abdelmoutalebbenbattouche4128]

for the 1.9d engine you need 8.2 litres

[@Satu368]

G13 Coolant Liquid....