Engine Fogging for Long Term or Winter Storage (Outboard Boat) - Tips from Tom

[@skippzne9135]

Ok, I think I've watched a half dozen of these videos trying to figure out how to winterize my outboard. Dude, best video instruction. Straight to the point.

[@jordanlittle5391]

Iv had 5 outboard and always just run em dry/empty that's it

[@markwestman1262]

I return to this video annually; you do an excellent job explaining the how and the why. Thanks!

[@MortonsontheMove]

Thanks Mark! I should actually watch my own video each year too! This year I fogged before I ran stabil into the lines... Had to redo it, lol.

[@davidjessee7701]

I've been a marine mechanic for years..he done a great job! The only thing I would do different is ,I wouldn't have pulled the plugs and sprayed the cylinders.. especially when you spin the engine with the plugs out you didn't have the water running..I know it didn't start but, it doesn't take more than 30 sec to start heating up an impeller.. One more thing ..store your fuel tanks full of gas..then there's no chance of condensation ....other than that good job..

[@dc5131]

David Jessee add stabil fuel along with a full tank? Thanks

[@TheIndianscout]

@@dc5131 yes

[@brianmorrison9066]

I seen a chart that showed worse impeller damage at 1500 rpm for 5 seconds than 600 rpm for 30 seconds. Actually much, much worse.

[@makensypeguero]

David Jessee p pa

[@Renanbuceta]

Hey.. Thank you for the tips. I'm from Brazil

[@garyczerkas9924]

Tom, I just bought a used Yamaha 9.9 two stroke (October) and I live in upstate NY. This is a great video to help me get it winterized. Thanks a bunch.

[@MortonsontheMove]

Thanks for the comment. Glad it helped you out!

[@toddhirthe875]

25 horse Mercury outboard winterization

[@squidinkRC]

Where upstate?

[@gariott8681]

Sorry for your loss. 2 strokes are trash 🚮

[@kennysacht7946]

So simply said. You are a great teacher. I'm not frightened to do this myself now! Thank you. :)

[@ronbarthelette1396]

Awesome video. You just saved me $150 getting it done by the marina.

[@theranger311]

Thank you for a great step by step process,,,, You did a much better job than the ads or the channels for the manufacturers of these outboard motors thank you very much now I feel confident I can do this myself

[@MortonsontheMove]

You're welcome! Glad you found the video helpful. We also wrote an article about the process. Sometimes it helps to see it in writing as well. :) www.mortonsonthemove.com/fogging-boat-engine/

[@WillLenssen]

The best video I've seen and heard. Thanks for the input and for the responses of viewers.

[@smokster0604]

Awesome hopefully you've returned and it works well....

[@STABILBrand]

Great engine fogging video! And thank you for using STA-BIL Fogging oil! If anyone has any questions, let us know! We are happy to help.

[@herewegofans]

3:44 loss da boot. Every time I use mine it stays on my plug too. Just funny is all. I also like putting no seize on plug threads and dielectric grease in plug boots before storing. And if my motor has a fuel filter up under cowl, empty that as well. GREAT video.

[@Gmurda1979]

Great video! One of the best out there explaining this process. Thank you!

[@donmeyer1621]

Great tip for any small engine Tom....snowmobiles especially. Noticed the sign leaning on the tree.....NICE TOUCH!!! lol

[@mattw8809]

Great, don't forget to grease ALL engine fittings and tilt tube ! ! Best to change lower gear oil before storage !

[@HungryH1951]

Excellent information and very helpful. Thank you for posting this video.

[@bimmerman1987]

Cleanest relic I've ever seen! Good work man!

[@MyTimmy75]

Good job :) Only thing I'd do though. Is drain those carbs on it. . I myself always unhooked the gas. Ran it until the carbs are completely empty, Even choking it to make sure while fogging it. An empty fuel system is a clean one And you'll have no issues next spring :) No plugged jets etc from old gas ;)

[@patonbike]

Cool , I just bought a 95 Whaler with a Yamaha pro 50 2 stroke. It will be stored for about 5 months in my garage.

[@danmcmyler4734]

Great video, well explained!

[@MortonsontheMove]

Thank you!

[@Shanedog76]

excellent video! on explaining the whole entire winterizing a boat motor!+ Gas tank, best I've Sean!

[@MortonsontheMove]

Thank you so much!

[@christyhedman5938]

@@MortonsontheMove I have a 2019 Yamaha AR210 jet boat got it out storage and one of the motors is running 5rpm and the other is 7rpm, we can go 50 plus mph and now we can can 38-40mph anyone kno why

[@tkbuilt2145]

Here I am watching this and I don't even have a boat.

[@brock6286]

TK BUILT same haha

[@ultralightfishingguy]

same but when we do we'll know this shit lol

[@thecentralscrutinizerr]

A lot of people don't realize it, but storing a boat in a green house type enclosure helps protect the boat better than storing in under an overhang. The greenhouse will keep the boat warmer in winter months often preventing freezing damage due to water in areas it isn't' supposed to be.

[@ct1762]

its all about changes in humidity. obviously freezing is bad because of expansion and contraction, but much worse is humidity. Ie. Florida is much worse for an engine than say Maine as its almost always humid salty air.

[@gemnicherry2670]

Yeah lemme pull my boat into my spare greenhouse 😂 kidding 😉

[@purehonda23]

Decent job... Definitely just sprayed the top of the pistons. Move the nozzle all over the place to ACTUALLY coat the cylinders

[@ImplantedMemories]

he mainly hit the side wall, the cylinders will spread it.

[@Suberten]

Dont spray too much in the cilinders or start the first time witout the sparkplugs, because of Hydrolock...

[@benhodge8128]

We will see next spring how well this does...

[@SkeeterAdventures]

Tip #1 don't lose the straw off the can when spraying into the cylinders!!! It's best to hold onto it while you're spraying

[@MortonsontheMove]

Ahh, good call!

[@mikepalucci1381]

Been there done that. Great tip!

[@mytech6779]

Ah, I once dropped the fuel stick into my airplane tank right before a flight, took half an hour and a mechanics flexi-grabber thing to get it out. (The fuel stick is a clear tube with gallon marks calibrated for your specific tank, more accurate than fuel gauges.)

[@Bansheeboat]

Great video! Nice motor you have there!

[@MortonsontheMove]

Thanks, It has been a reliable engine!

[@rodgoddard5113]

Good video, very informative and easy to follow.

[@MortonsontheMove]

Thanks!

[@fedeferreyra517]

@@MortonsontheMove Greetings from Argentina........Is that spray that you put directly on the carburettors wd40 style? Thank you

[@fishingautos8585]

Ps do your selves a fave and drain your carbs of all gas saves a carb cleaning. And another note just change your lower unit lube with some HPFPRO so your lower unit doesn't have a chance to crack.

[@johnshanahan1589]

Good video/process, well done.

[@haydenabraham7149]

I own a merc I’m all g and I also live in Australia so I use it every weekend but good vid

[@vicmorrison8128]

After fogging I disconnect the gas and use that gas for my snowblower. New gas in the spring.

[@sincerrre]

Great video! thanks for the info

[@smokster0604]

Well done mint.....

[@Taras-Nabad]

Well done.

[@robbyg1311]

Great video bud. Thanks

[@nobarakugisaki356]

Thanks for your video

[@crappygamervideo]

Great vid, thanks

[@lutfourrahaman3759]

very nice

[@kelvinp7899]

👍thanks for the video,

[@privateer0561]

I would never store a motor long-term with gas in the carbs. Drain them dry to prevent gummy residue from building up. Also, what's the use of filling gas tanks only to leave the gas to deteriorate over time? Drain the tanks (and hoses) dry. Also, get rid of as much water in the cooling system as you can (this is especially important in salt water motors) by first running fresh water through the motor for a few minutes and then using compressed air to clear the system of water. Dry motor, empty carbs. Done.

[@lloydcisco3027]

Some of theas electrical systems if u crank the engine with out the plug wires hooked up or grounded or on a spark checker u will be spending hundreds on. Trigers coils or what ever don't matter on a magneto ign system and y leave gas in the fuel bowls that's what plugs the jets stsbil is for gas in fuel tanks not in carb

[@couz10]

Thanks Bud!!

[@dylanponce2812]

i deal with salt water boats and what i do is run the carbs on my good gas then i run them empty, then i fog the cylinders

[@richt8297]

Don’t forget to drain the carburetors if it’s not fuel injected.

[@alphacapo]

There is two schools of though on that. Personally I never leave them dry. I would rather them be full of fuel then open to air and elements. I have never had a prob. Use ethanol free . as you always should anyways

[@davidjessee7701]

Wrong!! That's why he put in ethanol free fuel and stabil

[@sentientarc]

Tom, you said 2 things that conflict: "High Octane, Low Ethanol Gasoline". That's wrong but a VERY common mistake. Forumla 1 Race Engines use extremely high compression.Their engines have changed over the years (6 cylinder, then 4), usually because engineers want to try something new (there have even been recent Electric Formula 1 Races). Were it not for High Octane Fuel (100 or more), the Formula 1 Internal Combustion Engine would fire early due to the increased pressure in the cylinders. To compensate, High Octane Gasoline is used and, it's baclwards. The octane number increases as the ethanol increases because ethanol is less violatile than gasoline. Using pure gas in Formula 1 would cause detonation, a.k.a. knock or ping. Many vehicles are very powerful yet have small engines due to the lessons learned in Formula 1. Because Honda, for instance, can get power from a 4 cylinder engine that was unheard of just 40 years ago, higher octane fuel became necessary for you and for me. Honda learned a lot from Formula 1, even won often. Detroit should have been watching sooner. Me? I think that once the government stop stocking lakes and streams with fish, people are going to notice that there's a problem and maybe just maybe, admit that man is the cause.

[@mytech6779]

Your education in the subject is severely underdeveloped. The chemistry is just not that simple, a fine thread of truth is hidden in your statement but the whole of the statement is so grotesquely oversimplified and inaccurate that I must say you have no business giving any advice to anyone about fuel chemistry at any level. You can make 115octane and higher pure hydrocarbon fuels by using different blends of alkanes alkenes(both branched and linear), cycloalkenes and aromatics. In the USA fuel was much higher quality in 1970 than it is today and contained no alcohol, many regular street cars with the performance engine option had 11:1 or higher compression ratios and that was without the aid of special computer designed combustion chambers and antiknock sensors to retard timing. Specific blends of alcohol and gasoline(like 5 to 10% ethanol) can have some efficiency benefits for certain specific situations, while other blend ratios are rather undesirable for most uses. All alcohol-petroleum blends are very bad for storage. Over the years formula 1 has used many different fuels depending of the changes in racing rules that benefited one fuel or another, they were using pure methanol for several years. In drag racing they use pure methanol(not ethanol), pure nitro-methane, or gasoline depending on the category; some categories allow a choice of nitro-methane with no supercharging or gasoline with supercharging. For aviation gasoline adding a small percent alcohol (to prevent water crystals in freezing temperatures) will actually lower the anti-knock rating of 100/130 rated fuel by about 2 points while it will slightly raise the rating for 80/87. (These are aviation anti-knock performance test results, not exactly correlated with automobile octane rating but both measure anti-knock performance.)

[@ashley66639]

thanks

[@jet_lif3679]

So for a four store four wheeler that was fogged how long does it take for the smoke to go away ?

[@somurchu8888]

Many thanks.

[@blackpowdermaniacshooter]

In colder climates, why would you leave water inside the area between the engine block and lower unit. I would think that area would freeze too.

[@MortonsontheMove]

It depends on your engine and the drain instructions. A little water is ok as long as it is not filling a cavity.

[@blackpowdermaniacshooter]

@@MortonsontheMove It gets REAL cold here in Kentucky, so, I run anti-freeze throughout the block. I prefer knowing its safe.

[@scottsouder6450]

An outboard drains pretty well entirely once you shut it off and tilt it down. Inboards are the engines that have to have various valve drains opened, or filled with RV antifreeze.

[@Doc.Holiday]

Is six months considered long term requiring this?

[@Bassin_withaustin]

The 2 holes on the back is it normal for smoke to come out of it

[@MortonsontheMove]

Yes

[@John-uj9zy]

Hold on to the straw when spraying directly into the cylinders. Some folks have had the straw come off and go flying into the cylinder.

[@johnshanahan1589]

John Wish I’d seen your comment a few weeks ago. Fortunately able to fish the straw out of the cylinder with one of those telescoping finger tools....

[@danish7005]

excellent video...thanks

[@dujeamizic8804]

great video

[@anthonylaroche2738]

I used to use sea foam bout they always blew the vacuum valve after a couple months

[@mattwaters6987]

Good to know. Many thanx!

[@juliosandoval8244]

iam trying to winterize 2 outboard mercury 150 clx 2 stroke engines but it has 100 gallons of dirty gas.do i have to drain all the gas than putt new gas?

[@MortonsontheMove]

What do you mean by dirty gas? It really depends on the problem but if its old and not running well then probably. Stabilizers can only do so much. Its best to only leave a little gas in the tank anyway.

[@Tayjuice]

You should always leave as much gas as possible in the tank along with the stabilizer, since there will be no air left in the container that can turn in to water, just pure gas if filled to the top. :)

[@shawncordeiroTerraceBC]

DEFINE LONG TERM ? now until next june considerd long term ?

[@ezio8591]

so it seems you leave the lower unit gear oil in when you store it, do you also change the engine oil and filter and store it like that as well? What do you recommend if it's going to be stored for about 6 months, do you drain all oil and store it dry? Thanks, good video :)

[@Renanbuceta]

Hi. Here in Brazil a lot of people usually store their gas tank empty.

[@jesteronetime]

great vid very good info ...i would grease the spark plug treads,,,but the fuel is useless after two years..its says 12 months on my bottle of stabil.

[@MortonsontheMove]

Hmm weird, mine says 24 months... Great idea about the spark plug threads. dont want em seizing.

[@ronpowell2373]

If you can find it , use graphite grease or carbon grease- an just a small swipe, on the plug threads. Those greases are conductive and so wont hurt the plugs ground . Normal grease is not conductive. I also spray the outside of the engine in water dispersant spray , wipe down and then use a hand sprayed silicon wax ( one for car paint) on the outside of the engine. That keeps the engine looking new by keeping the bolts and fixtures from corroding. Also the engine leg goes onto a support stand once the boat is parked - a couple of milk crates or a small stack of lumbar pieces - it helps relieve the transom of the motor weight and means you can move the motor up and down if the tilt tube grease congeals in storage. That makes it easier to break the tilt system free when the boat comes out of storage.

[@rodgerboyes4324]

Jason Taylor i

[@jimmyclark6879]

I did all the things you said two years ago on my 40hp motor on my pontoon boat and the next year it would not start, it clogged up the carburetors and I liked to never got it running again. I don’t know if I put too much fogging oil in it or what. Any suggestions?

[@ImplantedMemories]

remove the carb, clean it, if nothing help rebuild it or buy a new carb

[@raultorres3322]

In the beginning, did you let run a fuel gallon completed

[@cruzberg84]

good info man

[@danieltucker8497]

one comment I would make it I would not spray that pressurizing cold ( because of the com,pressed gas) into the cylinder walls. that' s how you crack your engine. wait for it to cool down

[@endermanmc2758]

Should you pull the spark plugs out on two stroke?

[@MortonsontheMove]

Leave em in once fogged.

[@endermanmc2758]

Mortons on the Move thanks.

[@DjghostyMusic]

can I use fogging fluid on a PWC? I believe mine is fuel injected.

[@chriszbodula1894]

Two questions. Does the fogging coat the spark plugs where they need to be replaced. If your looking for water in the outdrive, wouldn’t the water settle at the top and not the bottom?

[@MortonsontheMove]

You wont need to replace the plugs, it will burn off. No the water is heavier than the oil and will settle to the bottom.

[@benjaminalguera3760]

Question so i did this for my Raider Out Board and now my engine doesnt start why? how long until i start my engine back up again? and is there anything i have to do?

[@MortonsontheMove]

It takes alot more turning over to burn off the wax, need to make sure the carbs have clean fuel too. It should ignight just fine, but will run rough and smoke for a while otherwise.

[@hafiz3207]

probably a gas oil (kerosene) cleaner was used. what is your idea ?

[@halohalo2498]

Y am I watching this ..i fish year round

[@احمدالمطروشي-غ8و]

Halo Halo كككمقخؤحيحيحيحبححانمكخحجمننتمججممممخخخذ١٠٠معاه. ج٩٩٣حصخiyوزططج

[@eddiebunch5133]

It's hard to fish year-round when the water is froze. With a boat.

[@rannz8]

@@eddiebunch5133 thats why you live in florida

[@Phillijr100]

I live where it can get -20 degrees below zero for couple months at a time. What about the water that circulates around the cylinders and impeller? How to treat this so there’s no water inside engine?

[@MortonsontheMove]

The engines are designed so that it will drain and leave only small amounts that wont cause damage, just leave it upright for a while to drain properly.

[@freedom703]

Wouldn't the water be sitting at the top of the lower unit??

[@javagif6851]

What about the water in the engine when temperature falls sub zero? This could crack the cylinder heads. Don´t you need to rinse the engine with coolant antifreeze instead of water to make sure that no water stays in the motor-block. I'm looking forward to your comment. best regards from Germany!

[@MortonsontheMove]

It depend on the engine, A larger 4 stroke with an intercooler you may have to do that if there is no proper drain. For outboards they are designed to drain in the vertical position. There may be some left but should not be filled in any cavities, so no pressure when freezing. Also turning it over a few times without starting it will run the pump dry and you should be good to go. I have never used antifreeze and never had a problem, just remember to check the lower unit for water.

[@ct1762]

Just like was said on previous comments, fogging isnt necessary unless its going to sleep for longer than a year or 2. As an experiment, i left the cylinder head off an old 40 horse johnson (for parts had a scored cylinder) all winter in thick salt air. no fogging oil coating. next spring: not a hint of rust anywhere on the pistons or cylinders, and that was with the head OFF. For my 225 johnson, i put a mix of fresh 89 gas, 40:1 royal purple synthetic , and stabil. ran it for 10 minutes and im done. i think that fogging oil is actually bad for plug fouling, carbon buildup and possible detonation.

[@goch907]

What about a motor that’s still in the crate. Brand new 1996 Johnson never been started. Should I fog it before starting it?

[@ct1762]

@@goch907 absolutely! what HP is it?Fogging oil from the factory (they used a slightly thicker special type) will not keep cylinders lubed forever.

[@goch907]

@@ct1762 it’s a 80 jet drive.

[@valvetrain1]

Good fuckin video Tom. Thumbs up

[@jovan3847]

4:01 why did you removing spark plugs when engine is hot?

[@hookednrolling2009]

Buy a evinrude etec engine does it for you and u can buy Xd100 oil for 100 to 1 mix computer controlled it can be change to 50 to 1 I have 08 300 etec I run mine tc w3 setting that way always has extra oil in it jt

[@cyrusdavirus007]

At the beginning of the season do you just start it up and go or do you have to run it with the plugs off to get some of that oil off?

[@MortonsontheMove]

cyrusdavirus007 you can just start it up. It will smoke white like you saw in the video until it's all burned off, then your good to go!

[@mk4trbo]

I know I'm a little late to the party but, you should ALWAYS be using ethanol free gas. And if you do, adding stabil is entirely unnecessary.

[@scottdickinson5110]

To kindly correct this - though E0 will be more resistant to issues of certain nature, it will still be subject to volatile breakdown and CAN stale out unless chemically treated

[@johnzanotti9959]

It is virtually impossible to find ethanol free fuel in some areas of the country. If you do you pay big time. Also, does the ethanol raise the octane needed for the engine? I removed ethanol from my gas but was told that the octane was not sufficient.

[@bademoxy]

it looks like those sparkplug holes have thread inserts. I change my O/B's gear oil and motor oil too.

[@e.fifield9034]

so would,nt you still have water inside your engine cooling ports,non toxic anti-freeze fed through a hose to your water muffs and through out the engine should make it good to go for cold weather. fogging is just one step just saying

[@MortonsontheMove]

By turning the engine over without running it (like in the video when we spray in the cylinders directly) this will run the pump dry and pump out any water. There may be a little moisture but if the engine is down they are designed to drain without any large amounts that could freeze and cause pressure buildup so it shoulden't be a problem. Just make sure to do that last step and turn the engine over a few times without fuel to get it out of the pump.

[@obageegee]

20 years, same motor, never fogged it

[@MortonsontheMove]

We dont fog unless it will sit for a few years.

[@Dean403]

What do you do for winter storage? Don't want to mess it up in Alberta winter.

[@obageegee]

@@MortonsontheMove I use mine from March till October, does not sit much

[@obageegee]

@@Dean403 Back yard on the trailer, double tarped

[@Dean403]

@@obageegee you don't winterize the motor?

[@timquinn4814]

When fogging motor do I leave water running thru motor.??

[@MortonsontheMove]

Only when it's running.

[@southamericanrocker]

So... Here I am in October 2019. Did it ever fired up again? Any video?

[@MortonsontheMove]

It was fired up 2 years later and ran perfect, winterized again the same way! :)

[@Rockastar100]

Nice! Where do you live btw?

[@Renanbuceta]

yesssss.. top

[@Bulletpoints17]

Stabil is only good for a year , better off just to fill the tank with ethanol free gas for longer than year storage

[@eastwardExpansion]

I’m not sure if cracking your lower unit is really, really, bad. I would just say really really expensive

[@spedC00kie]

would it work on a little one hire power outboard?

[@MortonsontheMove]

You can fog any size outboard. Even if it is a big 4 stroke EFI engine you should still fog it before long term storage.

[@spedC00kie]

Mortons on the Move awesome thanks!

[@gunlover1955]

I know someone with a cracked lower unit, lol.

[@roberttalmage4517]

You should have checked the lower unit oil plug for any metal fragments trust me I know what in taking about I work on boats for a living

[@Dean403]

I'm about to winterize my 89 Merc 2 stroke 15hp. Besides what he showed, how do I check for metal and is there anything else i need to do? Never owned a boat before.

[@roberttalmage4517]

@@Dean403 if you change the lower unit oil i would check the drain plug and see if there is any metal fragments on it. You don't have to change the lower unit oil. But if you do check your plug. That video is a good video to use just follow that video and you'll be good 👍

[@teerumbott]

Premium fuel only hearband there. This guy.. high

[@obviouslytwo4u]

its better, cheaper and safer to use 2-stroke oil when coating the cylinders. here in the uk we do things the old fashioned way. we don't buy in to company lies and so called life extenders products, because we know its all just to get you to buy buy buy.

[@mytech6779]

Two stroke oil, like regular engine oil, drains away during long storage. These sprays are tacky(the few brands have tried) and do not drain away.

[@SupaNami]

The number on your boat starts with MC, where is that?

[@aguyandhiscomputer]

SupaNami Michigan

[@xXsupaXcaucasianXx]

Wouldn't it be better to just dissconect the fuel line, cover the connector to the outboard, and reconnected the fuel line with fresh fuel to start the season

[@mytech6779]

Yes.

[@jasons4586]

does the water pee out even when the engine is not on?

[@dorothyjenkins2116]

I'm a female and wud never put water directly or otherwise on the inerds of my japanese mariner....love her way too much!

[@MortonsontheMove]

Water inside the engine would be a terrible idea.

[@daveroberts6884]

You do understand that the fogging fluid is an oil, not water.

[@dorothyjenkins2116]

Lmbo of course i do as I've winterized my own 3 cyl many times. My response was in reference from an earlier video where a guy was cleaning is engine and rinse with water straight from water hose trying to convince blind ppl its how u clean an engine. But i fo ty for your attempted correction.

[@ericc3406]

Great video, Tom One question, when you fog the cylinder of the engine, just unplug the 3 spark plugs, and turn the key? Thanks

[@MortonsontheMove]

You need to remove the spark plugs so you can spray the fluid directly into the cylinders but yes, just turn the key. The engine is just a big air pump and with the spark plugs out it will just move the cylinders back and forth with no compression and coat the cylinder walls.

[@ericc3406]

Thank you for your reply, Tom I haven't done this before, just want to make sure I did it right. Do you need to unplug the fuel? When I fog the cylinder? Anything else that I should pay attention? (Mine is Yamaha 2 stroke, outboard engine) Thanks again

[@MortonsontheMove]

As long as your have stabilizer in the gas and engine it doesn't really matter whether you leave it connected or not. I disconnect mine as I don't store the gas in the boat. Nothing else really, just the lower unit like in the video. If there are any exposed metal parts (like throttle linkages) It is sometimes good to spray them with a light oil to prevent corrosion.

[@MortonsontheMove]

Ya know I thought of another thing that I should have mentioned. Its a really good idea to lubricate your steering cable if your engine is connected to a steering wheel. There should be a grease zerk where the engine connects to the cable.

[@ericc3406]

Thank you for your reply, Tom I did fogging and change the gear oil yesterday, the boat is wrap up, ready for the winter, For lubricating the steering cable, I have to do it next year, Also,my wheel is off center already, I have to figure out how to fix it, and do it next year. Thanks again

[@dantehuang463]

You just want to spend more time with your engine before storing it.

[@MortonsontheMove]

And That

[@twistedjigco.548]

I have a 60hp jet version and love mine too!! I’d sleep with it like a baby