Digital Start Stop Button for PT01 Scratch

Shop: bihari.bigcartel.com
NEW Digital Start Stop circuit. Super easy, solderless installation! Noisless! No aditional power needed. 30mm arcade push button. You can install into Scratch Switch place or you can drill a hole for it on the opposite side.
beats by Sonny kraft & Hanzee

[@ant1977]

Just did this mod. Super easy. Honestly, the toughest part was getting the glue off of the wires. Whoever built my PT01 went a little heavy with the hot glue.

[@ramvmusic]

Just wanted to reach out again and although you requested to send a message ,picture or video through the website, or email it wont be necessary i retraced all steps for the digital start & stop button and found the solution,it was a simple wire connection when screwing in place the genuine start & stop connection/motor wires to the digital start & stop relay .... thanks again for reaching back and offering a helping hand in instruction. And as well the tone arm installation went well,although the power splitter was not the same as in your instructional video ( the power splitter video/model has the connections worded opposed to the model shipped with the tone arm which has the connections in numeric reference. A friend and i figured to pause and snap a few pictures of your instructional videos ( which are pristine👌🏼) and which also helped with making the proper connection to the power splitter (which was 1 and 3) for the model you sent.We were able to utilize the portion of the power splitter in which a visible option to screw opposed to using 3M tape to the numark casing, we screwed it to the sound board close in proximity ( to the right were the 3M tape was placed on the numark casing in the video ) and all went well. Thank you again for Following up & extending a helping hand and more so making these exceptional modification parts for portable Turntable’s GREAT WORK 🤔OOOH! And can you Please re issue the COBRA & BLOOD SPORT SLIP MATS 👌🏼👍🏼

[@BihariDesigns]

GREAT MAN! Yes, I'll make more Cobra slipmats too!

[@ramvmusic]

Will do. Thank you

[@martygarrett7973]

Question about this for the vestax handy trax non-usb: when cutting the motor wires, do i make the same shortcut or wire differently? Tried a few different methods, without success. Thanks.

[@markr6070]

Bit late to the party but can I use 12 inch records with this?

[@jimcole4151]

With the button in the felt pad position, does a large record clear the button, or is the button taller than the height of the surface of the platter?

[@BihariDesigns]

You can use 12" records if you replace the Scratch Switch with the Bihari Start Stop Plate.

[@fngltrax]

Would this mod also be possible to do on the Ion iPT01?

[@lafirmavzla]

I bought two of these and i want to install it into the scratch switch plate but the red/black cables are not long enough; what can i do about these issue?

[@BihariDesigns]

Extender cable comes with the start stop plate. Please contact Us through website with your order id. Thanks!

[@lafirmavzla]

@@BihariDesigns i did bought the plate as well. ok i will, thanks

[@NastyRhythm]

I purchased this but the pcb is different? HAs the design changed?

[@BihariDesigns]

Nope, you ordered the old version with relay. Already answerd by email too. thanks!

[@NastyRhythm]

@@BihariDesigns yer sorry should of said. All sorted now cheers dude

[@letmehearur8085]

Do these come in white by chance?

[@BihariDesigns]

Yes, have multiple options. White, Black, Red, Gold, Green, Blue, Yellow and Metalic color and combinations.

[@letmehearur8085]

@@BihariDesigns thank you!🙌

[@P8LT7U]

Is it possible to play 12 inch vinyles after this mod?

[@BihariDesigns]

only if you place the button in the fader hole.

[@BihariDesigns]

Or you can use with a smaller button. Only 20mm dia hole. Same wiring. Buy here: bihari.bigcartel.com/product/digital-start-stop-button-kit-20mm-pt01

[@dp9738]

@@BihariDesigns is there a video to install this one? And I would be able to keep the fader installed to scratch? I use my pt01 for sampling and cuts. Thanks!

[@BihariDesigns]

@@dp9738 20mm dia (small button) must be installed in the same way.

[@805MOE]

what is the part name of that board at 2:57 ?

[@BihariDesigns]

bihari.bigcartel.com/product/digital-start-stop-button-for-pt01-scratch

[@rodrigovilleda764]

And where comme the fader?

[@BihariDesigns]

if you use the fader with right hand, I recommend to drill a hole on left side. if you use the fader with left hand, I recommend the Bihari Fader Box. kzbin.info/www/bejne/eJCWc4Ouib9_qas

[@ramvmusic]

For verification i purchased these items 2 weeks ago under my Lady’s Name Ana luz A. Going to white plains New York,If needed Your Help would be Greatly appreciated