JDDPTA INSTALLATION GUIDE

JESSE DEAN DESIGNS JDDPTA INSTALLATION GUIDE. FOR VIDEO ON UPDATED JDD RIAA PRE AMP
kzbin.infoEoEqfmo...

[@DJCouchKing]

Got mine installed and working. No soldering needed. Works great after weight calibration. Thanks for the tutorial!

[@DJCouchKing]

Do you not need to remove the capacitors any more with the new kits?

[@enildemday5294]

installed on two ION iptusb which are the exact same as numark. One is perfect the other have a kind of airy noise and also the sound of the belt friction coming into the output when you slow the platter. I've tried to reinstall and check everything without any way to soluce the problem any idea? I will remove the preamp and also tone arm to check what's not working properly. The turntable was making no noise like this before the mod.

[@aaronrocha2859]

Anyone have the video for the DDJPTAPCB tone arm install.?

[@Dubb1000]

Hey Jesse, thank you for the tutorial. I've installed my tonearm as per this video, however, I only get the left signal when listening through headphones or the rca outputs, is there anything I can do to rectify this, or have I just got a faulty preamp...? I've got to the troubles of wiring a jack cable directly into the phono pre-amp block terminals, and played music through my phone, and still, I only get a left signal when using any output (headphones/RCA).

[@djmemoirs]

Dubb1000 i have the same issue. I troubleshooted by swapping out the jdd tonearm with the stock one and i tried another jdd preamp but still the same problem.

[@jaimevideos]

@@djmemoirs Hi, any news about solving this issue? I just replaced the preamp but still got the same problem!!!

[@jaimevideos]

Having the same problem here. I hope Jesse could help you/us. Any news about solving the issue? I replaced the preamp and still have the same problem.

[@geraldquesada7951]

My tension adjuster won't budge even after completely removing hex screw, please help...

[@IMNfilms]

Same issue.

[@Chordsearcher]

6 grams for 44-7?

[@projectmalaya]

good day sir, how to order you products?

[@signalloss]

Newer models have hot glue all over, apply isopropyl alcohol with qtip and gently lift. Cable lengths are shorter than shown here so get creative