"I see them on the block when I passes Looking like they need oxygen mask-es" - Fabolous "Breathe"
@LaenPvP3 жыл бұрын
I'm glad your channel was recommended to me by KZbin. I don't subscribe to much but I really appreciate all the work you've put into this channel and your videos. I ope you go far, sir.
@SquareWheelsAuto3 жыл бұрын
Thx for the support!! More to come!!
@USHER21873 жыл бұрын
Bro those are nice! As soon as I change the old ones and completely different car! Best of afe power! 💪🏾💯
@dirtytaco12213 жыл бұрын
Hell yeah man! 3.7 gang
@LaenPvP3 жыл бұрын
Thanks for the video! I like how clear and concise your content is. I'm still catching up on your videos over time, but I do have some recommendations for the engine bay that I plan on doing in the future, maybe you'll be interested in some. I'll warn you that some of them are on the excessive side, but would still be cool. I was thinking of relatively simple hacks you can do to improve various aspects of the car. I was going to pick up the Z1 silicone intake hoses, then wrap them in a high temperature gold radiant heat reflective tape. I was thinking of doing the exterior of the air boxes as well with the same gold tape. The interior of the stock air boxes I was thinking of using adhesive heat insulation foam tiles to help with conductive heat transfer through the plastic. They sell aluminized heat protection sleeving for pretty cheap, which I think would be great to cover fuel lines, the lower radiator hose, transmission and A/C lines, anything could benefit really. I'm also thinking of removing the intake plenum, to fully wrap it in a heat insulating foam with reflective tape. I would also put in some throttle body spacers, with the idea that it would increase the velocity of the air behind the throttle body during the vacuum of each intake stroke since it has more distance to travel. This should help promote atomization of the fuel as the air slams into droplets from each fuel injector pulse. With the intake plenum off, ya might as well heat shield the lower intake manifold, the fuel rails, and remaining fuel line. Since those heads give off a ton of heat, and the front timing chain cover prevents any airflow of reaching the valley between both heads, the heat builds up into a soaking pool around all components that are more efficient when cool. There's a Q50 carbon fiber hood that has the molds for both an intake cowl and exhaust vents. The intake cowl looks to be the perfect height to create an air duct to shoot over the timing chain cover, yet into the valley between the heads where the intake manifold, fuel rails, and intake plenum are exposed. The air would then travel towards the back of the engine and be diverted upwards towards the center of the windshield (which some modifications would probably be done to the create an exhaust pathway. Rain would be pretty cool, because if done right, you could have the water run through the channel and cool the exterior surface of the heads, while not splashing on any other component outside of that this created duct system. I'm curious to see if it's possible to make a smooth enough duct where it doesn't slam or buffet, I'd imagine you could optimize for a little bit of down-force with minimal drag. You could cut out the exhaust vents on the hood to help air escape that passes through the radiator which would help cool all the components in your engine bay, such as the full engine, the brake fluid reservoir, transmission. Perhaps additional intake ducts could be made with the fog light bezels to help carry air a z1 skid plate to aid in cooling the bottom end of the drive train. Hell, while we're under there, how about create an array of heat sinks bonded to the bottom of the oil pan, so there's increased surface area to dissipate heat while being aided by the additional air flow. Canards can be placed on the inside of the skid plate to help prevent wind buffeting. This leads into the next modification which is a transmission cooler in the mix. Keeping that thing cool and happy is always a good thing. I figure putting an additional layer of undercoating on would help insulate the heat radiating off the asphalt or concrete as well as provide additional sound deadening from road noise. Even crazier, take nearly all the cabin interior parts out and place a layer of sound deadening (like Dynamat) followed by a layer of heat insulating foam adhesive to decrease the transmission of exterior noise with kind of a thermos effect. I already did ceramic tint all the way around and it really helped out here in Arizona. I guess since we're doing the entire cabin, including the doors and ceiling, we might as well upgrade all the speakers as well as an amplifier to drive them. The thing should sound amazing after all of that and have a new level of quietness from within the cabin. Crazy long comment, I know, but It's deserved as you put an incredible amount of finesse into your content and I want you know that It's appreciated, entertaining, and informational.
@SquareWheelsAuto3 жыл бұрын
Whoa 😳😳😳😳 do u have IG or some other social we can connect on?? THX for the support!
@joseg59132 жыл бұрын
Just got these, waited 3 months and I got sent the wrong ones 💀
@SquareWheelsAuto2 жыл бұрын
Ughhhhhhhhh
@keithhayes39873 жыл бұрын
Really enjoy the content. Very informative. What's the background music welcome to the jungle????
@SquareWheelsAuto3 жыл бұрын
Thanks! Yup It's Welcome to the Jungle by Nick Battle
@carlbrooks902 жыл бұрын
Next video: why squarewheels wears shoes with no socks 🧦
@SquareWheelsAuto2 жыл бұрын
🤣🤣🤣
@LawrenceSpivey3 жыл бұрын
Do you have a link with who you purchased through? TY!
@SquareWheelsAuto3 жыл бұрын
I got mine thru Summit Racing showed up in 3 days bit.ly/3cWmBKz
@lilbot3807 Жыл бұрын
Did you tune it with stock cats or did you get test pipes?
@lilbot3807 Жыл бұрын
If with stock cats what were power gains and total whp?
@illport40022 жыл бұрын
Those fit on a q70??
@SquareWheelsAuto2 жыл бұрын
Probably if its a 3.7 but don't quite me on that!
@illport40022 жыл бұрын
@@SquareWheelsAuto yeah its the 3.7
@styllthesame3 жыл бұрын
First of all, how do you wear shoes without socks 🤔
@SquareWheelsAuto3 жыл бұрын
These comments crack me tf up 🤣😂🤣 It's a pandemic socks never even occurred to me
@glenmathew353 жыл бұрын
How much was it to get your headlights done?
@SquareWheelsAuto3 жыл бұрын
DIYd em so just the cost of paint and a 6 pack!
@glenmathew353 жыл бұрын
@@SquareWheelsAuto did you ever make a video on how to do it ?
@SquareWheelsAuto3 жыл бұрын
Nah I wish I would have, I did them before I started the channel! 😅
@SquareWheelsAuto3 жыл бұрын
Hope u subscribed, I got a headlights vid coming soon 👀
@geoking233 жыл бұрын
Wtf no socks bro thats disgusting almost as bad as shoes in the bed. Good video
@SquareWheelsAuto3 жыл бұрын
Lmfao 🤣🤣
@AL-mh3ps3 жыл бұрын
how you slip your feet into a pair of shoes without socks on was tough to watch